Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

反胶束模板制备聚甲基丙烯酸甲酯/无机纳米粒子/石墨纳米复合材料及其表征

以甲基丙烯酸甲酯(MMA)和三氯甲烷(CHCl₃)为油相制备反胶束微乳液, 依靠表面活性剂十六烷基三甲基溴化铵(CTAB)自组装形成的“微反应器”作为模板成功地制备了PMMA/Eu(OH)₃/EG和PMMA/Ni(OH)₂/EG纳米复合材料. 并用红外光谱(IR)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和差热-热重(TG-DTA)对该复合材料进行了表征和分析. 研究结果表明, 反胶束法可以有效地应用于有机-无机纳米复合材料的制备.     

Studies on bulk polymerization of methyl methacrylate. I. Thermal polymerization

The thermal bulk polymerization of methyl methacrylate (MMA) in a wide range of temperatures has been studied using a dilatometric reactor. It is shown that, irrespective of the care taken to purify the MMA, the evolution of the time-conversion curve can be explained only if we account for the presence of an impurity associated with the monomer acting as a free radical initiator. The activation energy for the decomposition of this impurity has been estimated as 98 kJ/mol. Having accounted for this impurity, the activation energy for the real thermal polymerization of the MMA has been estimated to be 75 kJ/mol. © 1993 John Wiley & Sons, Inc.     

Swelling equilibrium and preferential sorption of crosslinked poly(methyl methacrylate) in the mixture acetonitrile + n-butanol

Measurements of preferential sorption,( ₃), determined by refractometry, and swelling equilibrium, ₃ ^–1, of PMMA networks have been carried out in the cosolvent mixture MeCN+BuOH at 25 and 49 C. With an intermediate mixture composition, ₃ ^–1 passes through a maximum at both temperatures. At 25 C MeCN is preferentially adsorbed by the network over most of the composition range, but a small inversion is detected. At 49 C MeCN is preferentially adsorbed over all the composition range.The behavior of the system crosslinked PMMA/MeCN + BuOH is compared with the results obtained for solutions of linear PMMA in mixtures formed by the same two solvents, MeCN and BuOH.     

Reactivity ratios in conventional and nickel-mediated radical copolymerization of methyl methacrylate and functionalized methacrylate monomers

Copolymerization of an excess of methyl methacrylate (MMA) relative to 2-hydroxyethyl methacrylate (HEMA) was carried out in toluene at 80 °C according to both conventional and controlled Ni-mediated radical polymerizations. Reactivity ratios were derived from the copolymerization kinetics using the Jaacks method for MMA and integrated conversion equation for HEMA (r_MMA = 0.62 ± 0.04; r_HEMA = 2.03 ± 0.74). Poly(ethylene glycol) α-methyl ether, ω-methacrylate (PEGMA, M_n = 475 g mol⁻¹) was substituted for HEMA in the copolymerization experiments and reactivity ratios were also determined (r_MMA = 0.75 ± 0.07; r_PEGMA ∼ 1.33). Both the functionalized comonomers were consumed more rapidly than MMA indicating the preferred formation of heterogeneous bottle-brush copolymer structures with bristles constituted by the hydrophilic (macro)monomers. Reactivity ratios for nickel-mediated living radical polymerization were comparable with those obtained by conventional free radical copolymerization. Interactions between functional monomers and the catalyst (NiBr₂(PPh₃)₂) were observed by ¹H NMR spectroscopy.     

Selective permeation of CO2 through poly 2-(N,N-dimethyl)aminoethyl methacrylate membrane prepared by plasma-graft polymerization technique

A membrane having an amine moiety was prepared by plasma-grafting 2-(N,N-dimethyl)aminoethyl methacrylate (DAMA) onto a microporous polyethylene substrate. Permselectivity of the membrane for CO₂ over N₂ was achieved in both dry and water swollen conditions. When the CO₂ partial pressure in the feed gas was 0.047 atm, the selectivity of CO₂ over N₂ reached 130 for the highly swollen water containing membrane. This value was found to agree with that obtained with a mobile carrier membrane (supported liquid membrane) using DAMA as the carrier. The effects of several experimental conditions such as degree of grafting, feed partial pressure and temperature on the membrane performance were studied. It was suggested that the membrane acted as a fixed carrier membrane for CO₂ facilitated transport in under the dry condition and acted as a fixed reaction site membrane in the water swollen condition. The carrier transport mechanism is discussed for dry and aqueous membranes.     

GMA熔融接枝EPDM的研究

以甲基丙烯酸缩水甘油酯（ＧＭＡ）为接枝单体，过氧化二异丙苯（ＤＣＰ）为引发剂，对三元乙丙胶（ＥＰＤＭ）进行了熔融接枝，在烃链上引入极性基团，以改善ＥＰＤＭ与极性聚合物的相容性。用差示扫描量热计（ＤＳＣ）研究了ＧＭＡ的聚合温度，用富里叶红外（ＦＴ－ＩＲ）、凝胶渗透色谱（ＧＰＣ）对接枝产物进行了表征。实验结果表明，产物的接枝率和凝胶量可以通过反应条件（温度、时间、反应物组成及加料方式）来控制。     

HEMA-NVP-St三元共聚体系研究Ⅲ.均化剂对共聚物组成均一性的影响

用溴化钾-溴酸钾滴定法测定双键含量,元素分析法测定共聚物组成。讨论了HEMA-NVP-St三元共聚体系在不同反应程度时共聚物组成的变化,以及在此三元共聚体系中引入均化剂后,少量均化剂对共聚体系组成均一性的影响。发现在HEMA-NVP-St三元共聚体系中加入均化剂,对共聚反应的反应动力学影响不大,但对共聚物的组成均一性有较大影响。它的加入使三元共聚物中的链节比分布(即不同反应程度时,产物的累积平均组成)向较均一的方向发展。结合红外光谱、电子显微镜等实验证据,从微观结构上探讨了约化剂的作用。阐明均化剂改善了反应体系的相容性,从而得到组成分布较为均一的共聚产物。     

Determination of various deformation processes in impact-modified PMMA at strain rates up to 105%/min

The deformation processes in impact-modified PMMA, which deforms homogeneously, were determined by means of the stress/strain experiment (, ) with simultaneous lateral strain measurement (_lat) in a wide range of strain rates () up to 10⁵%/min (impact stress). The elastic, plastic cavitation and plastic shear processes were determined as a function of strain. Therefore we calculated the elastic strain ( _el), the elastic volume expansion ( _{vol el}), the cavitation strain ( _cav), which is identical with the plastic volume expansion ( _{vol pl}), the shear strain ( _sh) and the energy densities (W_el, W_cav, W_sh) related to these three processes.For strains of 3 % onward it was found that plastic shear processes and plastic cavitation processes are responsible for a partial loss of elastically stored energy. Both plastic processes turn out to be mostly anelastic deformations, their amount depending strongly on the strain rate. The contributions of the processes to the total deformation of the unmodified PMMA in its strain range are similar to those of the impact-modified PMMA, and the high impact strength is caused by a shift of the catastrophic rupture to very high strains.     

Methyl methacrylate polymerization at samarium(II)-grafted MCM-41

Sm(II)-modified periodic mesoporous silica (PMS), Sm[N(SiHMe₂)₂]₂(THF)_x@MCM-41, was used for the synthesis of Sm(II) alkyl, alkoxide, and indenyl surface species via secondary ligand exchange. The performance of the novel Sm(II)-based organometallic–inorganic hybrid materials as initiators for the graft polymerization of methyl methacrylate (MMA) is reported. All of the Sm(II) hybrid materials including the new PMMA–PMS composites were characterized via N₂ physisorption, elemental analysis, FTIR spectroscopy, and scanning electron microscopy (SEM). The organic–inorganic composites revealed complete pore blockage as well as enrichment and strong adhesion of the polymer at the exterior of the porous silica material.