锌基复合脱硫剂脱硫性能的研究

采用共沉淀法和机械混合法制备了Zn-Cu-Mn复合氧化物和ZCM(Z=ZnO、C=CuO、M=MnO2)复合氧化物,并对两种氧化物的脱硫能力进行了分析,同时也将这二种氧化物与单一的ZnO、MnO2和CuO的脱硫能力进行比较。利用XRD和FPD(火焰光度计)分别对复合氧化物的物质组成、结构和脱硫性能进行了分析。实验证明,Zn-Cu-Mn在250℃～350℃具有良好的脱硫能力,且300℃的脱硫能力最佳;空速为7799h-1时穿透硫容较高。煅烧温度为400℃时,Zn-Cu-Mn的脱硫能力高于ZnO。煅烧温度升高,Zn-Cu-Mn复合氧化物的比表面积和脱硫能力下降,且生成了具有尖晶石结构的CuMn2O4。与Zn-Cu-Mn复合氧化物和ZnO相比,ZCM复合氧化物的脱硫能力较低。煅烧温度为550℃时,ZCM体系中的MnO2分解为Mn2O3,当温度升至750℃时Mn2O3相消失,生成了具有尖晶石结构的CuMn2O4。     

复合材料单层板损伤分析

研究了复合材料单层板在远场均匀拉应力作用下，基体中微裂纹损伤，利用Ⅰ、Ⅱ型复合裂纹应力强度因子，分析了沿裂纹面的拉伸型损伤变量和剪切型损伤变量，应用能量释放率的概念建立了损伤条件下的应力应变关系，并给出了正交各向异性单向层板在损伤条件下的有效偏轴柔度系数计算公式。通过算例分析可知，由于复合材料单层板中微裂纹的存在，有效偏轴柔度系数S‘11和S‘61增大，而S‘21减小。     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

轻型高稳定性离轴非球面平行光管设计

为了满足高精度相机在外场环境下的检测要求,采用碳化硅光学材料制作反射镜,碳纤/环氧树脂基复合材料制作遮光筒,设计了一套重量轻、自身精度高、温度稳定性好的离轴平行光管。在二者线胀系数保持二倍关系的情况下,在一定温变范围内保持精度的稳定性。经检测,口径为400 mm,焦距为8 m的离轴平行光管的温变为(20±10)℃,系统波像差为1/5λ(P-V值,λ=632.8 nm)和1/27λ(RMS值),达到了设计要求,能够在外场环境下使用。     

(CdZnTe,ZnS)/ZnTe复合量子阱的光学特性研究

设计并制备了一种新型的(CdZnTe,ZnS)/ZnTe复合量子阱结构.使CdZnTe量子阱中的激子有可能在短时间内隧穿到ZnS阱层,从而达到提高光双稳器件“关”速度的目的.并通过对发光特性的研究证实在我们设计的结构中横向激子隧穿的存在,从而为进一步研究超高速光开关提供了实验依据.     

纳米晶聚合物复合薄膜PbTiO3-PEK-c的电光特性及其弛豫过程的研究

制备了掺杂型纳米晶聚合物钛酸铅聚醚醚酮 (PbTiO3 PEK c)复合薄膜 ,采用简单透射技术测量了该复合薄膜的线性电光系数 ,并研究了该复合薄膜的电光特性的弛豫过程     

Impact of composition ratio on the structure and optical properties of (1-x)MnFe2O4/(x)ZnMn2O4 nanocomposite

($1-x$)MnFe$_{2}$O$_{4}$ (MFO)/$x$ZnMn$_{2}$O$_{4}$ (ZMO) ($x=0$, 0.2, 0.5, 0.8, and 1.0) nanocomposite samples were prepared using co-precipitation procedure. The phase percentage, cell parameters, and crystallite size of MFO and ZMO phases in each nanocomposite sample were calculated using Rietveld refinement procedure. The x-ray diffraction (XRD) analysis and Fourier-transform infrared spectroscopy techniques established the variation in the lattice parameters of each phase are due to permutation of all cations among the octahedral and tetrahedral sites of MFO and ZMO. The different oxidation states of different ions in all samples were determined using x-ray photoelectron spectroscopy (XPS) technique. The variation in absorbance of the nanocomposite samples with composition parameter ($x$) is dependent on the wavelength region. The optical bandgap of the nanocomposite samples is decreased as the content of ZMO phase increased. The effect of alloying on the refractive index, extinction coefficient, dielectric constant, optical conductivity, and the nonlinear optical behaviors of all samples were studied in detail. The nanocomposite sample $x=0.5$ disclosed upgraded optical parameters with the highest refractive index, optical conductivity, and PL intensity, which nominate it to be functional in various application fields.     

Preparation, structures and photoluminescent enhancement effect of PbWO4–TiO2 composite nanofilms

A novel route for preparing PbWO₄–TiO₂ nanofilms on a glass substrate is firstly proposed. The collodion is used as a dispersant and film-forming agent. The nanofilms are characterized through SEM, XRD, TG/DTA, PL and IR, respectively. The results of XRD indicate PbWO₄ particles with tetragonal scheelite structure and TiO₂ particles with Anatase phase, and SEM shows they are well dispersed in the substrate. Compared with nanoparticles, when TiO₂ nanoparticles are added in 5% ratio, the PL intensities at 395 nm of PbWO₄ nanofilms are enhanced obviously. IR spectrum reveals a large absorption band between 750 and 870 cm⁻¹, which is the W–O stretching vibration in WO₄ tetrahedron.     

Tribological Behavior of Multiply-Alkylated Cyclopentanes (MACs)-Cu Nanoparticles Composite Thin Film

Multiply-alkylated cyclopentanes (MACs) composite thin films containing Cu nanoparticles are fabricated on the octadecyltrichlorosilane (OTS)-modified substrate by a spin-coating technique. The thickness, wetting behavior, and nanoscale morphologies of the films are characterized by means of ellipsometry, contact angle measurement, and atomic force microscope (AFM). The friction and wear behaviors of the thin films sliding against Si₃N₄ ball are examined on a UMT-2MT tribometer in a ball-on-disk contact mode. The worn surfaces of the OTS-MAC-Cu composite film and the counterpart Si₃N₄ balls are investigated with a scanning electron microscope. Water contact angle on OTS-MAC-Cu composite film is higher than that of OTS-MAC film. OTS-MAC-Cu composite film exhibits higher load-carrying capacity and better friction reduction and antiwear behavior as compared with OTS-MAC film. This may be attributed to the load-carrying and self-repairing property of the Cu nanoparticles in the composite film and the formation of a transfer layer composed of OTS, MAC, and Cu on the rubbing surface of the counterpart ball.     

Infrared absorption spectra and structure of TiO2-SiO2 composites

The composites xTiO₂-(1−x)SiO₂ (x = 0.1, 0.5, 0.9) were obtained by coprecipitation from solutions of alkoxides: tetraethoxysilane (TEOS) and titanium tetraisopropoxide (TIPT). Intermolecular interaction of the components of the composite is apparent in the IR absorption spectra in the 928–952 cm⁻¹ region, and is connected with bending vibrations of the Si-O-Ti bond. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 5, pp. 724–728, September–October, 2008.