Butylene copolyesters based on aldaric and terephthalic acids. Synthesis and characterization

The synthesis, characterization, and some properties of new copolyesters analogous to poly(butylene terephthalate) (PBT), based on L ‐arabinaric and galactaric acids, are described. These copolyesters were obtained by polycondensation reaction in the melt of mixtures of methyl 2,3,4‐tri‐O‐methyl‐L ‐arabinarate or methyl 2,3,4,5‐tetra‐O‐methyl‐galactarate and dimethyl terephthalate with 1,4‐butanediol. Their weight‐average molecular weights ranged between 10,000 and 34,000, with polydispersities ranging from 1.4 to 2.2. The composition of all the copolymers was analyzed by NMR, and was found to have a statistical microstructure. All these copolyesters were thermally stable, with degradation temperatures well above 300 °C. The melting temperature and crystallinity decreased in both series, and the glass transition temperature increased and decreased respectively, for the PBTGa and PBTAr series with increasing amounts of aldaric units in the copolyester chain. Only PBT‐derived copolyesters containing a maximum of 30% aldaric units showed discrete scattering characteristic of crystalline material. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1168–1177, 2009     

Disperse red 1 end capped oligoesters. Synthesis by noncatalyzed ring opening oligomerization and structural characterization

The synthesis of novel azofunctional oligoesters through bulk ring opening of ε‐caprolactone and D ,L ‐lactide (LA) at 100 and 130 °C, respectively, mediated by N‐ethyl‐N‐(2‐hydroxyethyl)‐4‐(4‐nitrophenylazo)aniline (Disperse Red 1) (DR1) is described. The synthetic procedure allows “clean” products because no catalysts were used in the reaction. Moreover, DR1 moiety is showed for the first time to promote the ring opening of cyclic esters. The molecular structure of the obtained oligoesters was established by NMR spectroscopy, MALDI ToF MS and electrospray ionization mass spectrometry (ESI MS). ESI‐MS/MS fragmentation experiments were used to demonstrate the nature of the chain end groups (hydroxyl and DR1). Intermolecular transesterification reactions were proved by mass spectrometry studies at least in the case of LA oligomerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 534–547, 2009     

Synthesis and characterization of hyperbranched polyesters from glycerol‐based AB2 monomer

This article describes the synthesis of a new glycerol‐based AB₂ type monomer—ethyl{3‐[2‐hydroxy‐1‐(hydroxymethyl)ethoxy]propyl}thioacetate ( 4 ) and its application for the preparation of hyperbranched polyesters. The polycondensation of 4 has been performed over a wide range of catalysts and reaction conditions leading to polymers containing solely primary hydroxyl groups. The polycondensation progress has been monitored by means of ¹H NMR. The degree of branching of the polymers showed to be in the range of 0.5 ± 0.03. The obtained polyesters easily undergo hydrolysis or alcoholysis and may be of interest as recycled materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3860–3868, 2009     

Anionic alternating copolymerization behavior of bifunctional six‐membered lactone and glycidyl phenyl ether

A copolymerization of 10‐methyl‐2H,8H‐benzo‐[1,2‐b:5,4‐b′]bipyran‐2,8‐dione ( 1 ) and glycidyl phenyl ether (GPE) was studied. 1 was a bislactone designed as a bifunctional analogue of 3,4‐dihydrocoumarin (DHCM), of which anionic 1:1 alternating copolymerization with GPE has been reported by us, previously. This alternating nature was inherited by the present copolymerization of 1 and GPE, leading to an intriguing copolymerization behavior in contrast to the ordinary statistical copolymerizations of monofunctional monomers and bifunctional monomers usually controlled by the proportional dependence of the crosslinking density on the monomer feed ratio: (1) When the feed ratio [GPE]₀/[ 1 ]₀ was 1, the two monomers underwent the 1:1 alternating copolymerization. In this case, 1 behaved as a monofunctional monomer, that is, only one of the two lactones in 1 participated in the copolymerization allowing the other lactone moiety to be introduced into the side chain almost quantitatively. (2) Increasing the feed ratio [GPE]₀/[1]₀ to larger than 4 allowed almost all of the lactone moieties to participate in the copolymerization system to give the corresponding networked polymers efficiently. The compositions of the copolymers [GPE unit]/[ 1 ‐derived acyclic ester unit] were always biased to smaller values than the feed ratios [GPE]₀/[lactone moiety in 1 ]₀ by the intrinsic 1:1 alternating nature of the copolymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3662–3668, 2009     

Synthesis of Boltorn 1,2,3‐triazole dendrimers by click chemistry

Second‐, third‐, and fourth‐generation hyperbranched aliphatic polyols namely Boltorn® H20, Boltorn H30, and Boltorn H40 were endcapped with azido and activated acetylenic groups in good to excellent yields (75–95%) following an acid catalyzed procedure. The resultant terminally functionalized dendritic azido and acetylenic groups undergo 1,3‐dipolar cycloaddition using methyl (or ethyl) propiolate and benzyl azide, respectively, under catalytic or noncatalytic conditions below 40 °C to yield 1,2,3‐triazole dendrimeric polymers in 82–95% yield, under extremely mild conditions that could be applied for compounds sensitive to acid, base, or heat. The dendritic azido and activated acetylenic derivatives may act as novel scaffolds to tune the mechanical properties of different polymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3748–3756, 2009     

A novel hydroxy functionalized polyester obtained by ring opening copolymerization of L‐lactide with a pyrolysis product of cellulose

A hydroxylactone ((1R,5S)‐1‐hydroxy‐3,6‐dioxabicyclo [3.2.1] octan‐2‐one, abbreviated as LAC) obtained from catalytic pyrolysis of cellulose was investigated as a monomer in the synthesis of polyesters by ring‐opening polymerization (ROP) with L ‐lactide. Although stannous octoate resulted inactive, ROP initiated by zirconium (IV) acetylacetonate afforded novel copolyesters from LAC and lactide mixtures in the bulk at 110 °C. Copolymers were obtained with different LAC content (from 19 to 45%) with a random microstructure as established by detailed NMR analysis. FTIR spectrometry confirmed the presence in the polymer chain of the OH groups originally present in LAC, which do not react during polymerization due to steric hindrance and inter/intramolecular hydrogen bonding. Reaction with trichloroacetylisocyanide proved that OH groups of the polyesters can be readily derivatized. The application of LAC as a comonomer enables the insertion of the alcohol functionality in polylactide avoiding protection/deprotection steps and potentially expanding the realm of biomaterials affordable from carbohydrate feedstock. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 247–257, 2009     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

Study of Glow Wire Ignition Temperature (GWIT) and Comparative Tracking Index (CTI) performances of engineering thermoplastics and correlation with material properties

Recent regulation IEC 60335-1 ed.4 (2008) was introduced for materials used in electric appliance, establishing new limits in Glow Wire Ignition Temperature (GWIT) performance for materials used for electric connectors. Development of new products with high GWIT is possible, but the main issue is to keep good mechanical properties and processability, as well as tracking resistance (Comparative Tracking Index-CTI). Only a few patents and scientific publications exist about glow wire test performance of polymers. In this work we report GWIT and CTI properties for three engineering thermoplastic polymers (PBT, PET and PC). We have also studied the phenomena involved in this test, treating the phenomena with the parameterisation approach already used in the studies of the fire behaviour of polymers. PC, PBT and PET filled with 30% w/w glass fibres have been tested, and material properties that can be related to GWIT and CTI performance have been measured by TGA, Laser Flash Thermal Diffusivity (LFTD), Pyrolysis-GC/MS. CTI seems to be correlated with the char formation tendency of the materials, so PBT show a higher tracking resistance than PET and PC. Polycarbonate was the only material that passed the glow wire test (GWIT higher than 775 °C) but generally GWIT performance is not directly related with degradation temperature, since PET is thermally more stable compared with PBT, but less stable in glow wire test. The ignition process, together with the unsteady heat and mass transfer process characteristic of glow wire testing, are affected by many parameters at the same time. That’s why it is not easy to relate results of TGA, Laser flash, Pyrolysis-GC/MS with the glow wire ignition temperature of the materials tested, but the whole of these properties can give useful indication.     

New functionalized polyesters to achieve controlled architectures

Following our continued interest in the production of bioerodible and biodegradable functional polymers for biomedical applications, we synthesized and characterized new unsaturated polyesters. The presence of functional groups in the polymer backbone provided sites for chemical modification, and through a variation in the structure, the physical properties, such as the hydrophilicity and solubility, could be affected. With 1,1-di-n-butyl-stanna-2,7-dioxacyclo-4-heptene as the initiator in the ring-opening polymerization of polyesters, a new set of functionalized polyesters was created. The polymerization of ϵ-caprolactone resulted in poly(ϵ-caprolactone) with a double bond incorporated into the structure. The polymers were obtained in a controlled manner with low molecular dispersities. The double bond was previously incorporated into L -lactide polymers, and the two reactions were compared in this study. The conversion of ϵ-caprolactone, with a degree of polymerization of 50, was completed within 140 min, whereas for L -lactide, only a 45% conversion took place in the same period of time. The dispersities were somewhat higher with ϵ-caprolactone because of the higher reaction rate and, therefore, lower selectivity. The incorporated CC double bond in the polyesters provided a variety of opportunities for further modifications. In this case, the double bond of the L -lactide macromonomers was oxidized into epoxides. Epoxidation was carried out with m-chloroperoxybenzoic acid as a chemical reagent. The conversion of the double bonds into epoxides was completed, and the obtained yields were good (>95%). As a result of the mild reaction conditions, the epoxidation of the double bond was carried out quantitatively without any side reactions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 444–452, 2004