Effect of Alkyl Side Chain on the Conformational Properties of Polysulfones with Quaternary Groups

Modification of intrinsic viscosity, temperature coefficient, and preferential adsorption coefficient of polysulfones with different alkyl side groups in N,N-dimethylformamide/methanol and N,N-dimethylformamide/water was investigated at different compositions and temperatures. The specific interactions, such as hydrogen bonding and polyelectrolyte effect induced by an enhanced dissociation of the ionizable groups, determine both the modification of the solvation power of the polymer coil and the difference in the composition of the mixed solvent inside and outside the coil.     

聚电解质溶液中2.6-ANS探针的荧光谱研究

本文合成了2.6—ANS荧光探针分子,并在含有不同外加盐的NaPSS溶液中测定了探针的荧光发射光谱。结果表明:探针的荧光强度随Cs增大而增大,而探针光谱的最大发射波长和半波宽度随Cs增大而减小。当Cs达到一定值时,荧光谱参数与Cs关系曲线出现转折点,此时聚离了链以“类胶束”状态存在。     

Rod‐Like Nano‐Light Harvester

Imitating the natural “energy cascade” architecture, we present a single‐molecular rod‐like nano‐light harvester (NLH) based on a cylindrical polymer brush. Block copolymer side chains carrying (9,9‐diethylfluoren‐2‐yl)methyl methacrylate units as light absorbing antennae (energy donors) are tethered to a linear polymer backbone containing 9‐anthracenemethyl methacrylate units as emitting groups (energy acceptors). These NLHs exhibit very efficient energy absorption and transfer. Moreover, we manipulate the energy transfer by tuning the donor–acceptor distance.

     

表面引发聚合反应研究进展

表面引发聚合反应作为一种新的聚合反应可广泛应用于固体基底的表面修饰与改性。结合分子自组装技术,几乎各种类型的聚合反应都有可能在固体基底表面进行。本文对表面引发聚合反应的研究进展进行了综述,对反应类型、实验方法、研究动向以及在合成聚合物刷、形成图案化聚合物薄膜等方面的应用与发展前景作了介绍与讨论。     

Patterned co-culture of primary hepatocytes and fibroblasts using polyelectrolyte multilayer templates

This paper describes the formation of patterned cell co-cultures using the layer-by-layer deposition of synthetic ionic polymers and without the aid of adhesive proteins/ligands such as collagen or fibronectin. In this study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated polystyrene (SPS) as the polycation and polyanion, respectively, to build the multilayer films. We formed SPS patterns on polyelectrolyte multilayer (PEM) surfaces either by microcontact printing PDAC onto SPS surfaces or vice-versa. To create patterned co-cultures on PEMs, we capitalize on the preferential attachment and spreading of primary hepatocytes on SPS as opposed to PDAC surfaces. In contrast, fibroblasts readily attached to both PDAC and SPS surfaces, and as a result, we were able to obtain patterned co-cultures of fibroblast and primary hepatocytes on synthetic PEM surfaces. We characterized the morphology and hepatic-specific functions of the patterned cell co-cultures with microscopy and biochemical assays. Our results suggest an alternative approach to fabricating controlled co-cultures with specified cell-cell and cell-surface interactions; this approach provides flexibility in designing cell-specific surfaces for tissue engineering applications.     

支化侧链偶氮聚电解质生色团H-聚集的动力学研究

利用偶氮聚电解质上的偶氮苯基团作为“探针”,研究了支化侧链偶氮聚电解质PMAPB6P-AA的偶氮生色团H-聚集动力学过程.研究发现,在不同THF/H2O配比情况下,H-聚集的速率有很大差别,THF比例越小,生色团发生H-聚集的速率越大,即偶氮聚电解质在溶剂体系中的疏水聚集对发生H-聚集有重要推动作用.通过测定偶氮聚电解质上的“孤立”生色团和H-聚集体的紫外光谱最大吸收值变化,表征了H-聚集过程的动力学,并分别用一级和二级动力学方程进行了拟合.结果表明,偶氮聚电解质的H-聚集过程具有二级动力学过程的特点.     

Interactions between Adsorbed Layers of a Low Charge Density Cationic Polyelectrolyte on Mica in the Absence and Presence of Anionic Surfactant

Interactions between two negatively charged mica surfaces across aqueous solutions containing various amounts of a 10% charged cationic polyelectrolyte have been studied. It is found that the mica surface charge is neutralized when the polyelectrolyte is adsorbed from a 10–50 ppm aqueous solution. Consequently no electrostatic double-layer force is observed. Instead an attractive force acts between the surfaces in the distance regime 250–100 Å. We suggest that this attraction is caused by bridging. Additional adsorption takes place when the polyelectrolyte concentration is increased to 100 and 300 ppm, and a long-range repulsion develops. This repulsive force is both of electrostatic and steric origin. The polyelectrolyte layer adsorbed from a 50 ppm solution does not desorb when the polyelectrolyte solution is replaced with an aqueous polyelectrolyte-free solution. Injection of sodium dodecyl sulfate (SDS) into the measuring chamber to a concentration of about 0.01 CMC (8.3 × 10⁻⁵M) does not affect the adsorbed layers or the interaction forces. However, when the SDS concentration is increased to 0.02 CMC (0.166 mM) the adsorbed layer expands dramatically due to adsorption of SDS to the polyelectrolyte chains. The sudden swelling suggests a cooperative adsorption of SDS to the preadsorbed polyelectrolyte layer and that the critical aggregation concentration between the polyelectrolyte and SDS at the surface is about 0.02 CMC. The flocculation behavior of the polyelectrolyte in solution upon addition of SDS was also examined. It was found that 0.16–0.32 mol SDS/mol charged segments on the polyelectrolyte is enough to make the solution slightly turbid.     

FTIR studies of conformational energies of poly(acrylic acid) in cast films

Fourier transform infrared (FTIR) spectroscopic measurements have been undertaken to estimate the conformational energies of poly(acrylic acid) (PAA) cast films in the temperature range of 40–130°C. The temperature dependence of the IR spectra in the C=O stretching region has been analyzed to yield the side-chain and backbone conformational energies. The estimated energies are close to those previously obtained by polarized Raman spectroscopic measurements for PAA solutions. Combining the FTIR value of conformational energy with the simplified rotational isomeric state (RIS) model proposed in the Raman analysis provides a persistence length in accordance with earlier SAXS experiments. The data also agree with the Gibbs-DiMarzio predictions, further substantiating the validity of the analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 507–515, 1997     

Immobilization of silver nanoparticles into POEGMA polymer brushes as SERS‐active substrates

Surface‐enhanced Raman scattering (SERS) has attracted a great deal of interest during the past four decades and emerged as an ultrasensitive optical technique for chemical and biomedical analysis. It is widely accepted that the facile fabrication of SERS substrates with high activity and good reproducibility is of crucial importance for their applications. Herein, we report on a fast and robust method for the synthesis and immobilization of silver nanoparticles (AgNPs) into poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes under mild conditions without using any reducing agents. POEGMA brushes of different chain lengths were synthesized directly on silicon wafers by surface‐initiated atom transfer radical polymerization with various reaction time. X‐ray photoelectron spectroscopy and field emission scanning electron microscope measurements indicated that the AgNPs were firmly and homogeneously embedded into POEGMA brushes. The resulting POEGMA–AgNP hybrid films were employed as SERS substrates for the detection of 4‐aminothiophenol, giving rise to an enhancement factor of up to 1.9 × 10⁶. The influence of the POEGMA's chain length on SERS performance was also investigated. Copyright © 2016 John Wiley & Sons, Ltd.