Synthesis of hydroxyl-terminated polybutadiene possessing high content of 1,4-units via anionic polymerization

<正>The hydroxyl-terminated polybutadiene(HTPB) possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene,using alkyllithium containing silicon-protected hydroxyl group as initiator and cyclohexane as solvent.The polymers were characterized by GPC,IR and ~1H-NMR.The mechanical properties of cured films were also evaluated.The results show that the content of 1,4-units for HTPBs made by anionic polymerization reaches up to 90%.The molecular weight distribution is very narrow(≤1.05).The functionality of hydroxyl groups approaches 2.Compared with free radical HTPB,the elongation at break of anionic HTPB films increased by 70%,while the tensile strength remained nearly unchanged.This new HTPB can be very useful in solid propellant.     

Initiator‐fragment incorporation radical copolymerization of vinyl acetate and 1,2‐polybutadiene as a multivinyl monomer

The copolymerization of vinyl acetate (VAc) with 1,2‐polybutadiene (1,2‐PB; 85.5% 1,2‐units and 14.5% 1,4‐units) as a multivinyl monomer was carried out at 80 °C in dioxane with dimethyl 2,2′‐azobisisobutyrate (MAIB) at high concentrations (0.10–0.50 mol/L) as an initiator. The copolymerization of 1,2‐PB [0.80 mol/L (monomer unit)] and VAc (1.20 mol/L) with MAIB (0.30 mol/L) for 4 h proceeded homogeneously without gelation to yield a soluble copolymer. The resulting copolymer was divided into methanol‐ and n‐hexane‐insoluble parts, of which the yields based on the total weight of the comonomers and initiator were 46 and 20%, respectively. The methanol‐insoluble part consisted of the fractions of the 1,2‐PB units with (9 mol %) and without (39 mol %) an intact double bond, the 1,4‐PB unit (8 mol %), the VAc unit (32 mol %), and the methoxycarbonylpropyl group (12 mol %) as the MAIB fragment, whereas the hexane‐insoluble one was composed of the fraction of the 1,2‐PB units with (4 mol %) and without (17 mol %) a double bond, the 1,4‐PB unit (4 mol %), the VAc unit (60 mol %), and the methoxycarbonylpropyl group (15 mol %). The use of higher concentrations of 1,2‐PB and VAc and lower concentrations of MAIB resulted in gelation. The cast film from a chloroform solution of the methanol‐insoluble part contained spherical pores organized in a hexagonal way with a monodisperse pore size of 3 μm. The copolymer molecules seemed to be arranged in an ordered way on the surface layer of the pores, as shown by an optical microscopy image under crossed polarizers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2328–2337, 2006     

Synthesis of polybutadiene‐based particles via dispersion ring‐opening metathesis polymerization

Latex particles based on 1,4‐polybutadiene were synthesized via dispersion ring‐opening metathesis copolymerization of 1,5‐cyclooctadiene with a α‐norbornenyl poly(ethylene oxide) macromonomer. Stable but polydisperse colloidal dispersions in the 50 nm to 10 μm size range were obtained. In this work, particular attention was paid to the effects of the kinetics of copolymerization on the structure of the graft copolymers formed and on the onset of turbidity. Strategies to prepare monodisperse polybutadiene particles were also designed through the growth of a polybutadiene shell from a well‐defined polynorbornene seed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1154–1163, 2004     

Interaction of Polystyryl Radical with Tris Azido-Iron(III) Complex

The polymerization of styrene initiated by 2,2′-azobisisobutyro-nitrile (AIBN) had been studied in N, N-dimethylformamide (DMF) at 60°C in presence of tris azido-iron(III) complex. The complex was prepared in situ by mixing solid sodium azide with hexakis(N, N-dimethylformamide)iron(m) perchlorate, [Fe(DMF)₆] (ClO₄)₃, in the ratio 3:1. The nature of the complex formed was established by Job's method. The equilibrium constant for Fe³⁺ + 3N₃ ^? ? Fe(N₃)₃ determined by the limiting logarithmic method is 6.14 ± 10⁶ liter³/mole³. The velocity constant for the polystyryl radical towards the complex is 3.13 ± 10⁴ liter/mole-sec.     

Circularly polarized emission from a narrow bandwidth dye doped into a chiral nematic liquid crystal

We report on circularly polarized light emitted from a chiral nematic liquid crystal doped with a luminescent organolanthanide dye. The organolanthanide emission displays an extremely narrow spectral bandwidth of Δ λ_E≈ 8 nm. This is considerably narrower than the CNLC selective reflection bandwidth Δ λ_R≈60 nm. When conventional dyes with broader emission bandwidths are dissolved into CNLCs, the average degree of circular polarization g of emitted light is reduced from the maximum degree g _MAX ; this is due to the overlap of the emission band with the reflection band edges, and spectral regions outside the reflection band. Here, however, we can place the entire emission band inside the reflection band and achieve g ≈ g _MAX=1.27. Furthermore, a high degree of circular polarization is maintained under off-axis viewing up to a viewing angle of ≈ 30° to the normal.     

Crystallization kinetics and melting behavior of syndiotactic 1,2‐polybutadiene

Differential scanning calorimetry was used to investigate the isothermal crystallization, subsequent melting behavior, and nonisothermal crystallization of syndiotactic 1,2‐polybutadiene (st‐1,2‐PB) produced with an iron‐based catalyst system. The isothermal crystallization of two fractions was analyzed according to the Avrami equation. The morphology of the crystallite was observed with polarized optical microscopy. Double melting peaks were observed for the samples isothermally crystallized at 125–155 °C. The low‐temperature melting peak, which appeared approximately 5 °C above the crystallization temperature, was attributed to the melting of imperfect crystals formed by the less stereoregular fraction. The high‐temperature melting peak was associated with the melting of perfect crystals formed by the stereoregular fraction. With the Hoffman–Weeks approach, the value of the equilibrium melting temperature was derived. During the nonisothermal crystallization, the Ozawa method was limited in obtaining the kinetic parameters of st‐1,2‐PB. A new method that combined the Ozawa method and the Avrami method was employed to analyze the nonisothermal crystallization of st‐1,2‐PB. The activation energies of crystallization under nonisothermal conditions were calculated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 553–561, 2005     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007     

Structure and properties of rubber/organic montmorillonite nanocomposites prepared by in situ anionic intercalation polymerization

Polybutadiene (PB), polyisoprene (PI), and styrene–butadiene rubber/organic montmorillonite (OMMT) nanocomposites (NCs) were prepared by in situ anionic intercalation polymerization. The intercalation structure, chemical constitution, and morphology of the rubber/OMMT NCs were characterized with X‐ray diffraction, H NMR spectroscopy, and transmission electron microscopy; the thermal and dynamic mechanical properties of the rubber/OMMT NCs were characterized with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The mechanical properties of PB/OMMT NC were also tested. The results showed that a certain extent of exfoliated rubber/OMMT could be prepared by anionic in situ intercalation polymerization. The incorporation of OMMT obviously changed the microstructure content of PB and PI: the concentrations of the 1,2‐unit, 3,4‐unit, and trans‐1,4‐unit increased dramatically with an increasing concentration of OMMT, and the concentration of the cis‐1,4 structure decreased. The addition of OMMT‐DK1B and OMMT‐DK4 had little effect on the molecular weight and molecular weight distribution, but the addition of OMMT‐DK1 reduced the molecular weight of rubber, and the molecular weight distribution became broad. The glass‐transition temperature, weight‐loss temperature, storage modulus, and loss modulus of the NCs evidently increased, but tan δ decreased. OMMT apparently enhanced the rubber matrix; for example, the breaking strength and hardness of PB/OMMT NC crosslinked rubber increased greatly, but the tear strength and permanent deformation did not change much. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1344–1353, 2005     

Ferrocenyl‐functionalized long chain branched polydienes

A convenient two‐step approach for the synthesis of ferrocenyl‐functionalized long chain branched polydienes, based on both butadiene and isoprene, respectively, is presented. Classical living anionic polymerization was used to synthesize different AB_n type poly(diene) macromonomers with moderate molecular weights between 1700 and 3200 g/mol and narrow polydispersity. Quantitative end‐capping with chlorodimethylsilane resulted in the desired AB_n macromonomer structures. In the ensuing Pt‐catalyzed hydrosilylation polyaddition, branched, functionalized polydienes were obtained by a concurrent AB_n + AR type of copolymerization with mono‐ and difunctional ferrocenyl silanes (fcSiMe₂H or fc₂SiMeH). Molecular weights of the branched polymers were in the range of 10,000 to 44,000 g/mol (SEC/MALLS). Because of the large number of functional end groups, high loading with ferrocene units up to 63 wt % of ferrocene was achieved. Detailed studies showed full conversion of the functional silanes and incorporation into the branched polymer. Further studies using DSC, TGA, and cyclovoltammetry (CV) measurements have been performed. Electrochemical studies demonstrated different electrochemical properties for fcSiMe₂‐ and fc₂SiMe‐units. The CVs of polymers modified with diferrocenylsilane units exhibit the pattern of communicating ferrocenyl sites with two distinct, separate oxidation waves. The polymers were also deposited on an electrode surface and the electrodes investigated via CV, showing formation of electroactive films with promising results for the use of the materials in biosensors. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2518–2529, 2009     

Synthesis and characterization of a film‐forming,crosslinked, amphiphilic block copolymer of butadiene and acrylamide

An amphiphilic block copolymer of acrylamide and butadiene was synthesized by the polymerization of acrylamide in the presence of the crosslinker N,N′‐methylene bisacrylamide initiated by a hydroxyl‐terminated polybutadiene/V(V) macroredox initiator. The product had good film‐forming ability. It was characterized by IR and NMR spectroscopy, viscosity, swelling, and microhardness measurements, scanning electron micrography, and differential scanning calorimetry. A good film was obtained from the block copolymer with a greater proportion of butadiene; it had greater permeability for nonpolar solvents, and it was poorly permeable to water and other polar solvents. The film swelled in polar and nonpolar solvents and had almost the same capacity for the loading and release of hydrophilic and hydrophobic dyes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3290–3303, 2006