Ab initio calculations of vibronic activity in phosphorescence microwave double resonance spectra of p-dichlorobenzene

The phosphorescence spectrum of p-dichlorobenzene has been calculated using multiconfiguration self-consistent-field wave functions and the quadratic response technique. Attention has been paid to the intensity distribution of the singlet–triplet (³B_1u¹A_g) transition through a number of vibronic subbands. The second order spin–orbit coupling (SOC) contribution to the spin splitting of the ³B_1u (^3*) state is found to be almost negligible, and the calculations therefore provide a good estimate for the zero-field splitting (ZFS) parameters based only on the electron spin–spin coupling expectation values. Nuclear quadrupole resonance constants for the different Cl isotopes are also calculated to accomplish the ZFS assignment. The electric dipole activity of the spin sublevels in the triplet–singlet transitions to the ground-state vibrational levels is estimated by calculations of derivatives using distorted geometries which are shifted from the equilibrium position along different vibrational modes. A vibrational analysis of the phosphorescence spectrum, based on the SOC-induced mixing of the singlet and triplet states calculated along different vibrational modes, provides reasonable agreement with experimental data.Acknowledgment O. R.-P. would like to thank the European MOLPROP network for support. The authors thank Alexander Baev for fruitful discussions. This work was supported by the Swedish Royal Academy of Science (KVA).     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Electrophysical and electrochemical properties of Y1 − x Ca x Cr1 − y Me y O3 (Me = Mg, Cu)

Structure, thermal elongation coefficient, and conductivity of Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu) in air are studied at 100–1000°C. Electrochemical activity of electrodes made of most conducting compositions Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu), contacting solid electrolyte 0.9ZrO₂ + 0.1Y₂O₃, is studied over a wide range of polarizations, in air, at 700–900°C.     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

Measurement of the sign and the magnitude of heteronuclear coupling constants from spin-state-edited J-cross-polarization NMR experiments

New spin-state-selective (S3) NMR pulse sequences exclusively applying cross-polarization schemes to achieve optimum homonuclear and heteronuclear 1H-X coherence transfer are reported for the simple and accurate measurement of the magnitude and sign of heteronuclear coupling constants for samples at natural abundance. The proposed spin-edited HCP-TOCSY experiments are based on clean heteronuclear S3 excitation, generated by simultaneous co-addition of two independent in-phase and anti-phase components created during the mixing heteronuclear J-cross-polarization (HCP) step, which is finally transferred to other protons by a conventional homonuclear TOCSY mechanism. Selective 1D and non-selective 2D approaches for the easy determination of long-range proton-carbon and proton-nitrogen coupling constants on any protonated and non-protonated heteronuclei are presented and discussed for several organic molecules.     

Simultaneous hydrogen and peroxide production by photocatalytic water splitting

Photocatalytic oxidation of water is a promising method to realize large-scale H₂O₂ production without a hazardous and energy-intensive process. In this study, we introduce a Pt/TiO₂(anatase) photocatalyst to construct a simple and environmentally friendly system to achieve simultaneous H₂ and H₂O₂ production. Both H₂ and H₂O₂ are high-value chemicals, and their separation is automatic. Even without the assistance of a sacrificial agent, the system can reach an efficiency of 7410 and 5096 μmol g^–1 h^–1 (first 1 h) for H₂ and H₂O₂, respectively, which is much higher than that of a commercial Pt/TiO₂(anatase) system that has a similar morphology. This exceptional activity is attributed to the more favorable two-electron oxidation of water to H₂O₂, compared with the four-electron oxidation of water to O₂.     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

DIPOLE POLARIZATION RELAXATION AND MOLECULAR STRUCTURE OF MAIN-AND SIDE-CHAIN LIQUID-CRYSTALLINE POLYMERS

Molecular mobility in thermotropic polyesters and side-chain polymers with different struc-ture of mesogens and spacers has been studied by dielectrical method in dilutesolutions. The results made it possible to establish the multiplicity of dielectric relaxationtransitions which reflects the small- and large-scale types of molecular motion. It was shownthat dielectric relaxation processes occurring in accordance with local mechanism (relaxationtimes 10~(-9)--10~(-7)s. and the activation energy 10--50kJ/mol) are due to the mobility of kineticchain elements of different length within a monomer units. It was found that the dielectricrelaxation process connected with a large-scale form of molecular motion (relaxation times10~(-5)--10~(-6)s. and the activation energy 100kJ/mol) did not depend on the molecular massbut was infiuenced by factors changing the conformational state of the macromolecule. It isestablished tha the cooperative reorientation mobility of associated mesogenic fragments isthe source of the large-scale process.     

用二维色谱技术测定聚合反应气体组成

介绍一种无阀切换的二维气相色谱分析方法。采用两根不同性质的色谱柱并联连接，样品分别经两根色谱柱分离后汇合在一起进入同一检测器。一次进样可同时测定Ｈ２、Ｏ２、Ｎ２及Ｃ１～Ｃ３的组分。     

Polarization Dependent Photoinduced Supramolecular Chirality in High-Performance Azo Materials

Here, we will show photo-induced supramolecular chirality in thin films of achiral amorphous polymers with azo groups in their side-chain. A matter of particular interest is the effect of various film thicknesses on azimuthal rotation and ellipticity of incident/transmitted polarized light. Furthermore, we investigated the temporal stability of inscribed chirality. By polarimetric measurements, we found out that the azimuthal rotation gets higher with layer thickness. In this scope, we were able to measure a very high azimuthal rotation of Δψ/d=112.5∘/μm. The inscribed chirality was stable for several days. Furthermore, we investigated the time-resolved behavior of incident and transmitted polarization ellipticities for various thicknesses. The time dependency may be explained by a two-step process: (1) fast trans-cis-isomerization resulting in photo-orientation and (2) slow photo-induced mass flow.