Selective Transport of Lead(II) and Strontium(II) Through a Crown Ether-Based Polymer Inclusion Membrane Containing Dialkylnaphthalenesulfonic Acid

New polymer inclusion membranes (PIMs) containing 18-membered crownethers and dialkylnaphthalenesulfonic acid are proposed for Sr2+ and Pb2+removal from nitric acid solutions. The influence of source phasecomposition and stripping agents was characterized and permeabilitycoefficients were calculated. The PIMs are easy to prepare and may be usefulin separation and concentration procedures for these cations from complexmixtures such as nuclear waste. Long-term stability was obtained for atleast several weeks of constant use during which no significant change ofpermeability was observed.     

Immobilization of α-amylase in vinyl-polymer-based interpenetrating polymer networks

Semi-interpenetrating polymer networks (IPNs) of poly(ethylene glycol), poly(vinyl alcohol) and polyacrylamide were prepared as a support for enzyme immobilization and kinetic studies were performed for the immobilization of -amylase. The effect of IPN composition on the extent of immobilization was investigated and the percentage of relative activity of the immobilized enzyme was evaluated as a function of the chemical architecture of the IPNs, pH and temperature, taking starch as a substrate. The kinetic constants and the maximum reaction velocity were also evaluated. The IPNs were characterized by IR spectral analysis.     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

Nanocomposites Produced by Direct Intercalation of Secondary Doped Polyaniline in V2O5

The possibility of the production of nanocomposites based on V₂O₅ and conducting polymers by direct intercalation of macromolecules of secondary doped polyaniline into the interlayer galleries of nanoparticles of aqueous V₂O₅ sol was demonstrated for the first time. The driving force of the intercalation process is substitution of the protons present in the galleries of the V₂O₅ by a polyaniline chain carrying a positive charge.     

Peculiarities of the effect of the electronic nature of substituents on the basic properties of aliphatic amines

Changes in the hybrid state of atomic orbitals of nitrogen and p-character of LEP, which occur under the effect of saturated hydrocarbon radicals and polar substituents in aliphatic amines, differ substantially. Therefore, the effect of the both substituents on the basicity constants of amines cannot be described by the single formal type of interaction. The anomalous changes in the basicity in the series of primary, secondary, and tertiary alkylamines, which are discussed in the literature, and the correlations pK _BH+ = f(*) and G _B = f(*) are, in fact, imaginary, because the alkyl radicals at the N atom do not manifest the electron-donor properties.     

Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive

The recovery of plastic waste but also its applicability in product development may be an incentive to industry, since the use of such plastics represents a cheaper source of raw material. The aim of the present paper is to study the feasibility of recycling polyolefins as additives to improve the rheological properties of lithium 12-hydroxystearate lubricating greases. The effects that both soap and recycled low-density polyethylene (LDPE) concentration exert on the rheology of lithium lubricating greases and its relationship with grease microstructure are discussed in this work. In this way, different lubricating grease formulations were manufactured by modifying the concentration of lithium 12-hydroxystearate and content of recycled LDPE, according to a RSM statistical design. These lubricating greases were rheologically characterized through small-amplitude oscillatory shear (SAOS) and viscous flow measurements. In addition to these, scanning electronic microscopy (SEM) observations and mechanical stability tests were also carried out. Recycled LDPE was found to be an effective additive to modify grease rheology, acting as filler in the soap entangled microstructure. The values of both apparent viscosity and viscoelastic functions in the linear viscoelastic region increase with soap and recycled polymer concentrations. However, the addition of recycled LDPE distort the microstructural network of these greases resulting greases with less relative elastic characteristics and poorer mechanical properties as LDPE content increases.     

Synthesis and characterization of poly(4-vinyl,2′-carboxybensophenone)

The synthesis and characterization of poly(4-vinyl,2′-carboxybenzophenone) ion exchange resin is described. This resin displays a remarkably high capacity for Cu²⁺. Control of pH permits selective adsorption and estimation of Fe³⁺. This ion-exchanger is quite stable to loading acid washing cycles. © 1995 John Wiley & Sons, Inc.     

三段加热系统对大尺寸MPOF预制棒一步拉伸工艺

采用自行设计的微结构聚合物光纤专用拉丝系统对大尺寸微结构聚合物光纤预制棒的一步拉伸工艺进行了研究.该微结构聚合物光纤加热系统采用三段式梯度加热,可保持炉内温度的控制准确度在±2℃以内.在保持送料速度与牵引速度恒定、协调的条件下,通过对温度场温度梯度控制优化,确定了最佳拉丝温度组合,并得到了直径规格310 μm、标准偏差为±20 μm的较高质量的微结构聚合物光纤.     

Effect of Poly(methacrylic acid) on the Cytokine Level in an In Vivo Tumor Model

Cancer is a leading cause of mortality globally. Despite remarkable improvements in cancer-treatment approaches, disease recurrence and progression remain major obstacles to therapy. While chemotherapy is still a first-line treatment for a variety of cancers, the focus has shifted to the development and application of new approaches to therapy. Nevertheless, the relationship between immune response, neoplastic diseases and treatment efficiency is not fully understood. Therefore, the aim of the study was to investigate the immunopharmacological effects of methacrylic acid homopolymer in an in vivo tumor model. Materials and methods: Monomeric methacrylic acid was used to synthesize polymers. Methacrylic acid was polymerized in dioxane in the presence of 4-Cyano-4-[(dodecylsulfanylthiocarbonyl)sulfanyl]pentanoic acid. To study the molecular weight characteristics of PMAA by GPC, carboxyl groups were preliminarily methylated with diazomethane. An experimental cancer model was obtained by grafting RMK1 breast cancer cells. The serum levels of IL-6, IL-10, IL-17, transforming growth factor β1 (TGF-β1), and tumor necrosis factor α (TNF-α) were measured by ELISA. Results: The effect of PMAA on the serum concentrations of several cytokines was studied upon its single administration to laboratory animals in early neoplastic process. The IL-6, IL-17 and TGF-β1 concentrations were found to change significantly and reach the level observed in intact rats. The IL-10 concentration tended to normalize. Conclusion: The positive results obtained are the basis for further studies on the effect of methacrylic-acid polymers with different molecular-weight characteristics on the neoplastic process.     

Gray photorefractive polymeric optical spatial solitons

We show that gray spatial optical solitons are possible in biased photorefractive polymers under steady-state conditions. We find that for a given material parameter the absolute value of a gray photorefractive polymeric soliton's phase decreases with an increase in the beam's grayness, whereas it increases with the material parameter for a given beam's grayness and that the full width half maximum (FWHM) of the gray soliton beam's intensity increases with the beam's grayness when the normalized background intensity and the material parameter are fixed and decreases with an increase in the normalized background intensity when the material parameter is fixed. On the other hand, we also show that N coupled beam evolution equations in biased photorefractive polymers can exhibit multicomponent gray solitons. These multicomponent gray solitons can be obtained provided that the N coupled beams share the same polarization, wavelength, and are incoherent with one another. The characteristics and stability properties of these multicomponent gray solitons are also discussed in detail.