Development of variable‐magnification X‐ray Bragg optics

A novel X‐ray Bragg optics is proposed for variable‐magnification of an X‐ray beam. This X‐ray Bragg optics is composed of two magnifiers in a crossed arrangement, and the magnification factor, M, is controlled through the azimuth angle of each magnifier. The basic properties of the X‐ray optics such as the magnification factor, image transformation matrix and intrinsic acceptance angle are described based on the dynamical theory of X‐ray diffraction. The feasibility of the variable‐magnification X‐ray Bragg optics was verified at the vertical‐wiggler beamline BL‐14B of the Photon Factory. For X‐ray Bragg magnifiers, Si(220) crystals with an asymmetric angle of 14° were used. The magnification factor was calculated to be tunable between 0.1 and 10.0 at a wavelength of 0.112 nm. At various magnification factors (M≥ 1.0), X‐ray images of a nylon mesh were observed with an air‐cooled X‐ray CCD camera. Image deformation caused by the optics could be corrected by using a 2 × 2 transformation matrix and bilinear interpolation method. Not only absorption‐contrast but also edge‐contrast due to Fresnel diffraction was observed in the magnified images.     

Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

Charge redistribution and a shortening of the Fe—As bond at the quantum critical point of SmO1–xFxFeAs

Many researchers have pointed out that there is a quantum critical point (QCP) in the F‐doped SmOFeAs system. In this paper, the electronic structure and local structure of the superconductive FeAs layer in SmO_1–xF_xFeAs as a function of the F‐doping concentration have been investigated using Fe and As K‐edge X‐ray absorption spectroscopy. Experiments performed on the X‐ray absorption near‐edge structure showed that in the vicinity of the QCP the intensity of the pre‐edge feature at the Fe‐edge decreases continuously, while there is a striking rise of the shoulder‐peak at the As edge, suggesting the occurrence of charge redistribution near the QCP. Further analysis on the As K‐edge extended X‐ray absorption fine structure demonstrated that the charge redistribution originates mostly from a shortening of the Fe—As bond at the QCP. An evident relationship between the mysterious QCP and the fundamental Fe—As bond was established, providing new insights on the interplay between QCP, charge dynamics and the local structural Fe—As bond in Fe‐based superconductors.     

High pressure studies using two-stage diamond micro-anvils grown by chemical vapor deposition

Ultra-high static pressures have been achieved in the laboratory using a two-stage micro-ball nanodiamond anvils as well as a two-stage micro-paired diamond anvils machined using a focused ion-beam system. The two-stage diamond anvils’ designs implemented thus far suffer from a limitation of one diamond anvil sliding past another anvil at extreme conditions. We describe a new method of fabricating two-stage diamond micro-anvils using a tungsten mask on a standard diamond anvil followed by microwave plasma chemical vapor deposition (CVD) homoepitaxial diamond growth. A prototype two-stage diamond anvil with 300?µm culet and with a CVD diamond second stage of 50?µm in diameter was fabricated. We have carried out preliminary high pressure X-ray diffraction studies on a sample of rare-earth metal lutetium sample with a copper pressure standard to 86?GPa. The micro-anvil grown by CVD remained intact during indentation of gasket as well as on decompression from the highest pressure of 86?GPa.     

Influence of higher harmonics of the undulator in X‐ray polarimetry and crystal monochromator design

The spectrum of the undulator radiation of beamline P01 at Petra III has been measured after passing a multiple reflection channel‐cut polarimeter. Odd and even harmonics up to the 15th order, as well as Compton peaks which were produced by the high harmonics in the spectrum, could been measured. These additional contributions can have a tremendous influence on the performance of the polarimeter and have to be taken into account for further polarimeter designs.     

单色光束的衍射度

受近期Gawhary和Severini在Opt.Lett.33,1360(2008)一文中引入的光束近轴度的启发,定义了一个独立于光束近轴度的衍射度参数来描述单色光束的衍射扩散程度,所定义的衍射度只依赖于光束的角谱分布,并可以定量比较不同光束的衍射扩散程度.     

基于光纤锥级联结构的湿度传感器

提出了一种基于普通单模光纤粗锥级联结构的马赫-曾德尔干涉湿度传感器.将两根单模光纤对芯熔融成一个粗锥,并依次级联,形成光纤锥-单模光纤-光纤锥-单模光纤-光纤锥结构.外界环境湿度、温度的改变使传感器的纤芯基模和包层模的光程差发生改变,引起传感器干涉光谱发生变化.通过监测干涉谱波长和能量的变化实现对外界物理量的测量.实验结果表明,当空气中湿度在35~95%RH范围内变化时,传感器的湿度灵敏度为-0.065dB/%RH,线性度为0.997;当温度在30~80℃范围内变化时传感器的温度灵敏度为69.4pm/℃,线性度为0.998.该传感器可以避免温湿度的交叉影响,实现单参量的同时在线区分测量.     

铜铟铝硒硫薄膜的低成本非真空混合法制备

采用溶剂热法制备出铜铟铝硒Cu(In,Al)Se₂ (CIASe)粉末,然后滴涂铜铟铝硒CIASe浆料获得前驱体薄膜,最后通过硒化/硫化过程制备出铜铟铝硒CIASe和铜铟铝硒硫CIASeS薄膜．通过XRD、SEM、XRF及光吸收等表征,发现所制备的薄膜为单相的黄铜矿结构,具有(112)择优取向．同时,在使用硫元素替代硒之后,薄膜的XRD主峰向高的2θ角度漂移,多孔薄膜也变得更加致密．薄膜带隙值也增加到更为合适的范围,从1.21 eV增加到1.33 eV,这也说明了硫化过程有利于提高CIASeS薄膜的质量．     

基于光楔阵列产生光学涡旋阵列的研究

在研究光楔衍射法产生单涡旋的基础上,基于长条形光楔阵列,提出了利用光束阵列衍射产生涡旋阵列的方法.该方法要求光束阵列在平行于光楔边缘方向上的光束间距等于光束直径的整数倍.利用超精密机床采用一体化加工法加工了光楔阵列元件,验证了该方法的可行性.利用空间光调制器快速灵活调整光束阵列的优点,搭建了借助空间光调制器加载达曼光栅衍射产生所需光束阵列的实验光学系统.针对光束阵列与光楔阵列的匹配问题,研究了达曼光栅掩模图基本单元对光束阵列的调控,获得了可调结构的光束阵列.实验产生了拓扑荷一致的光学涡旋阵列,与仿真结果相一致,证明所提方法的有效性.     

激光通过散射介质的聚焦

基于角谱衍射公式和散射介质的圆形高斯分布模型,数值模拟光通过散射介质的聚焦.通过反馈优化算法实现散射光束的波前整形,在目标位置处形成一个很亮的聚焦光斑.改变聚焦目标位置后,可实现任意位置处的单点或多点聚焦.讨论了空间光调制器上的总调制单元个数、每个调制单元相位准确度与光强增长因子的关系.结果表明:目标位置处的光强随着总像素单元数的增加而线性地增强,并且随着调制单元的相位准确度的增加而增强.