Study on properties of flame‐retardant cyanate esters modified with DOPO and triazine compounds

Ternary flame‐retardant modified cyanate ester blends (CEPG and CEPA) are formed by combining triazine compounds (TGIC or TAIC) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide with cyanate ester resin. The curing behaviors, thermal and mechanical properties, and the flame‐retardant properties are investigated. The results show that the CEPG and CEPA blends result in lower curing temperatures and glass transition temperatures than those of neat CE. Both of CEPG and CEPA blends significantly improve the flame‐retardant properties of CE resins, and UL‐94V‐0 rate is achieved for CEPG‐1.0 and CEPA‐0.5. The dielectric constant and loss of CEPA blends are lower than those of CEPG blend with the same phosphors content, and both of them are lower than those of neat CE. Therefore, the ternary flame‐retardant modified cyanate ester blends provide 2 ways for composites of producing printed circuit board with high flame‐retardant property and low dielectric constant and loss.     

Medium modified fragmentation function: equivalence of the ACSX and QW formalisms in the high-Q2 region

We study the medium modified fragmentation function in high-energy heavy-ion collisions. We show that the ACSX and QW formalisms are equivalent to each other in the high-Q² limit in both theoretical and numerical aspects.     

Heavy-Ion Collisions: Experimental Highlights

Lattice QCD predicts a phase transition between hadronic matter and a system of deconfined quarks and gluons (the Quark Gluon Plasma) at high energy densities. Our current understanding of this new state of matter will be discussed with two key results from the Relativistic Heavy Ion Collider (RHIC).     

A conformal mapping approach for investigating the free-boundary seepage from symmetric channels

We present a new method to investigate the two-dimensional free-boundary groundwater seepage from symmetric soil channels into a homogeneous isotropic porous medium. We use Levi–Civitá’s function to construct an integral representation for the conformal mapping of the complex potential domain onto the physical flow domain. A genetic algorithm (GA) is used to calculate the coefficients of the Maclaurin series expansion of Levi–Civitá’s function. The coordinates of the points from the channel contour, calculated by means of the integral representation, must satisfy the analytic equation of the contour. We use this condition to define the objective function of the genetic algorithm. Levi–Civitá’s function is afterwards used to calculate the seepage loss, the free lines, the streamlines, the equipotential lines, the isobars and the velocity field. Some examples illustrate the method.     

New Tools for Investigating Electromagnetic Hot Spots in Single‐Molecule Surface‐Enhanced Raman Scattering

Surface‐enhanced Raman scattering (SERS) is quickly growing as an analytical technique, because it offers both molecular specificity and excellent sensitivity. For select substrates, SERS can even be observed from single molecules, which is the ultimate limit of detection. This review describes recent developments in the field of single‐molecule SERS (SM‐SERS) with a focus on new tools for characterizing SM‐SERS‐active substrates and how they interact with single molecules on their surface. In particular, techniques that combine optical spectroscopy and microscopy with electron microscopy are described, including correlated optical and transmission electron microscopy, correlated super‐resolution imaging and scanning electron microscopy, and correlated optical microscopy and electron energy loss spectroscopy.     

Study of the Molecular Mobility in Polymers with the Thermally Stimulated Recovery Technique—A Review

Thermally stimulated recovery (TSR) is a non‐conventional mechanical spectroscopy technique that allows to analyse in detail the relaxation processes of polymeric systems in the low frequency region. This work reviews the main aspects and potentialities of this technique. The different kinds of TSR experiments that can be performed, global and thermal sampling (TS) experiments, are described and illustrated with several examples. Also, the different methods for the determination of the thermokinetic parameters (activation energy and pre‐exponential factor) of the thermal sampling (TS) procedure are explained and compared. In this context, the compensation phenomenon, which always appears in TSR results when the studies are performed in the glass transition region of a given system, is discussed. Examples of the application of this technique to different polymeric systems during the last 20 years are provided. An emphasis will be made on the analysis of the effect of crystallinity degree and crosslink density on the TSR response. A comparison between the results (characteristic times and activation energies) obtained by different techniques, namely TSR, dynamic mechanical analysis (DMA), and differential scanning calorimetry (DSC), is made.     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.     

Plasmonic resonance instigated enhanced photoluminescence in quantum dot dispersed nematic liquid crystal

In the present investigation, the optical property of the nematic sample p-methoxybenzylidene p-decylaniline, dispersed with SiO₂ quantum dot (QD), has been reported. Enhanced luminescence has been observed from nematic-QD composites. Surface plasmonic effect along with QD exciton has been highlighted to discuss the observed intensification in photoluminescence. The intensified photoemission from the nematic composites can also be inferred from improved orientational behaviour of the liquid crystal molecules due to dispersion of QDs. Variation in the intensity of photoabsorption can be harnessed for development of luminescent display devices and optical parameter-driven scientific applications.