Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

毛细管电泳-电感耦合等离子体原子发射光谱法对田七提取液中Fe、Cu和Mg存在状态的研究

提出了以水作溶剂微波萃取提取,并以毛细管电泳电感耦合等离子体原子发射光谱(CE-ICP-AES)法测定田七提取液中Mg、Cu和Fe的形态的分析方法。实验结果表明:Mg仅以游离态存在;而Cu和Fe除了游离态以外,还存在其它三种未知的形态。此外,还测定了田七中20个微量元素的总含量,并得到了上述待测元素在水提取液中的提取率。     

Solid-phase microextraction–capillary gas chromatography combined with microwave-induced plasma atomic-emission spectrometry for selenite determination

The use of solid-phase microextraction (SPME) with gas chromatography coupled to microwave-induced plasma atomic-emission detection (GC–MIP-AED) is described for selenite [Se(IV)] speciation. Aqueous standards were derivatised with sodium tetraethyl- or tetrapropylborate and extracted by SPME. Headspace extraction of the ethyl and propyl derivatives was studied. Relevant experimental conditions were optimised, including conditions for derivatisation and extraction and those of gas chromatographic analysis. The limits of detection achieved for headspace sampling of derivatised Se(IV) were in the low ng mL^–1 range for both ethylation and propylation. When the method was applied to analysis of selenite in selenised yeast reference material results were in good agreement with the indicated values.     

拟多维高效液相色谱法分离纯化双峰驼精清中的活性蛋白

利用一种新的高效液相色谱洗脱技术，建立了 ｐＨ缓冲液／离子对二元洗脱模式，对双峰驼精清的两种提取物的反相柱上进行了分离，得到了较纯的活性蛋白组分。该法操作简单、快速、比常规ＨＰＬＣ有更高的选择性及峰容量，并可减少活性蛋白的失活。     

Synthesis of ultrafine SiC from rice hulls (husks): A plasma process

Heat-treated rice hulls have been used as precursor material for synthesis of ultrafne SiC in a RF plasma reactor. Rice hulls containing finely distributed silica and active carbon act as a source for SiC formation. The plasma-synthesized powder contained ultrafnc -SiC with excess carbon and some unreacted silica. Post-treatment processes such as oxidation and acid (HF) treatment appear to be effective in removing the excess carbon and silica.     

Investigation of glow discharge plasma for surface modification of polypropylene

Material surface properties of polymers, plastics, ceramics and textiles can be modified by atmospheric or low‐pressure glow discharge plasma. The aim of the present work is to study the surface modification of biaxially oriented polypropylene (BOPP) film in order to improve its hydrophilic and wetting properties. In this article we used low‐pressure, low‐temperature oxygen plasma for the surface treatment of BOPP. Scanning electron microscopy indicates that plasma treatment causes mainly physical changes by creating microcraters and roughness on the surface and increasing surface friction. Attenuated total reflectance infrared spectra show oxygen‐containing groups such as ? OH at 3513 cm^?1 and C?O at 1695 cm^?1. Microscopic investigations of water droplets on BOPP (treated, untreated) show that the interfacial adhesion of treated surfaces is increased. Copyright © 2003 John Wiley & Sons, Ltd.     

Determination of doxorubicin in human plasma by excitation-emission matrix fluorescence and multi-way analysis

Direct determination of doxorubicin (DXR), a cytotoxic anthracycline antibiotic, in human plasma was accomplished based on excitation-emission matrix (EEM) fluorescence measurements and multi-way chemometric methods based on parallel factor analysis (PARAFAC) and N-PLS. Several different procedures, such as residual analysis, core consistency diagnostic (CONCORDIA) and split-half analysis were employed to determine the correct number of factors in PARAFAC. These procedures converged to a choice of two factors, attributed to DXR and to the sum of two fluorescence species present in the plasma. Sample PARAFAC loadings were employed to build a regression model against concentration, resulting in a RMSECV of 0.060 μg ml⁻¹. N-PLS using two factors produced a RMSECV of 0.045 μg ml⁻¹. Figures of merit (FOM), such as sensitivity (SEN), selectivity (SEL) and limit of detection (L_D) were determined for both PARAFAC and N-PLS.     

安培检测芯片毛细管电泳及其初步应用

An end-channel amperometric detector with a guide tube for working electrode was designed and integrated on a home-made glass microchip. The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy. The fabrication was carried out in a two-step etching process. A 30 μm carbon fiber microdisk electrode and Pt cathode were also integrated onto the amperometric detector. The baseline separation of dopamine (DA), catechol (CA) and epinephrine (EP) was achieved within 80 s. Relative standard deviations of not more than 5.2% were obtained for both peak currents and migration times of DA and CA (n=5). Using standard adding method, DA in tLrine and plasma samples was detected. The recoveries were in the range of 83%—103%.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

A photometric detector driven by beta radiation

It was recently found that typical Chromatographic carrier gases such as argon or nitrogen could be used in a modified flame photometric detector for general or selective determination of eluted molecules. The detector was powered not by a flame but by a radioactively stimulated, mild discharge. The luminescence arose from the second positive system of nitrogen (in argon), and various emissions from aroyl-containing molecules (in nitrogen).This study describes experiments that take away not only the flame but also the discharge: The energy that produces the luminescence is derived solely from the beta decay of⁶³Ni. Because of this low power input, the sensitivity of the present beta-driven photometric detector (-PD) is limited to about 25 ppm of nitrogen (in argon), and to about 5 pg/s for benzaldehyde and other well-responding aroyl compounds (in nitrogen). In accordance with mechanisms postulated earlier, other types of molecules do not produce significant responses in the absence of an electrical field.Material taken from doctoral thesis