液相色谱/大气压化学电离飞行时间质谱分析氢化可的松中微量杂质

采用液相色谱/大气压化学电离飞行时间质谱测定氢化可的松对照品中微量杂 质，并采用源内碰撞诱导解离质谱进行了结构定性分析。方法简单，可靠，重现性 好。     

CuI/l-proline catalyzed click reaction in glycerol for the synthesis of 1,2,3-triazoles

Despite the apparent simplicity of the copper(I) iodide catalyzed CuAAC reaction, the conversion of the catalytic species, i.e. Cu(I) to thermodynamically more stable Cu(II), via aerial oxidation or disproportionation is a major issue. To stabilize the Cu(I) species, the reaction is ideally carried out under an inert atmosphere in the presence of additives such as alcohols, amines, thiols, and aldehydes. Herein, we report the first CuI catalyzed click reaction without an inert atmosphere by employing the CuI/l-proline system in glycerol. The method showed remarkable stability towards sensitive functional groups such as acetonides and 1,2,4-trioxanes.     

紫外拉曼光谱研究焙烧气氛对氧化锆相变的影响

 以紫外拉曼光谱技术研究了在不同焙烧气氛中氧化锆样品的表面晶相结构及其转变过程．结果表明，在有氧气氛中焙烧的氧化锆样品易转变为单斜相，而在惰性气氛中焙烧可以有效地稳定样品体相和表面的四方相结构．在缺氧气氛中焙烧的样品暴露于空气中后，表面极易转变为单斜相，而其体相仍为四方相结构，这表明四方相氧化锆在样品表面是极不稳定的．     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

The effect of the sintering atmosphere on the densification of B4C ceramics

Densification of boron carbide during sintering may be improved by a two-stage process, namely heating to 2000°C under vacuum and sintering at 2190°C under argon. This sintering regime allows achieving a relative density of the ceramic bodies fabricated from a fine powder higher than 95%. The nitrogen treatment of the boron carbide phase at 1900°C leads to the formation of the BN phase and precipitation of graphite. Vacuum treatment of these samples at 2000°C leads to decomposition of the boron nitride phase. The liberated free boron may again react with graphite to form in situ boron carbide particles. The experimental investigations of the sintering behavior of the boron carbide phase under various atmospheres supported the thermodynamic predictions regarding the phase transformation. No evidence, however, was found for enhanced sintering under a nitrogen atmosphere.     

氧化钪中Ti,Mo,W,V,Zr等难熔杂质光谱分析

本用提高样品蒸发速率的方法提高氧化钪中难熔杂质光谱分析灵敏度。采用一种特殊的阴极设计，配合使用Ｎ２＋Ａｒ气氛控制，在旋流气室中放电激发，取样仅５ｍｇ的条件下，光谱测定氧化钪中难烷质Ｔｉ，Ｚｒ，Ｍｏ，Ｗ，Ｖ灵敏度可达（１－３）×１０＾－４％。测定的相对标准偏差为９％－２７％。     

大气有机物热脱附-全二维气相色谱-火焰离子化分析方法

全二维气相色谱（GC×GC）是20世纪90年代发展起来的具有高分辨率、高灵敏度、高峰容量等优势的分离技术,在我国将其用于大气挥发性有机物（VOCs）研究方面才刚刚起步.本文将GC-GC与氢火焰离子化检测器（FID）联用,构建了用于测量大气有机物的热脱附-全二维气相色谱-氢火焰离子化分析系统（TD-GC×GC-FID）.采用HP-5MS和HP-INNOWAX色谱柱,建立了C5-C15大气有机物分析方法,实现了一次分析过程同时分离非甲烷烃（NMHCs）、含氧挥发性有机物（OVOCs）和卤代烃等多种组分.利用标准物质和四级杆质谱（qMS）进行定性,外标法结合FID质量校正因子定量.目标物在GC-GC谱图中第一和第二维保留时间变化分别小于0.6s和0.02s,峰体积平均相对标准偏差为14.3%,其中烷烃和芳香烃为4.5%.标准曲线r2均值大于0.99,平均检出限为6.04ng,平均回收率为111%.利用该方法检测到2010年1月北京市区大气中400多种有机物（信噪比大于50）,鉴定了其中的103种物质,包括烷烃、烯烃、芳香烃、卤代烃、醛、酮、酯、醇和醚等.所测定有机物平均总浓度为51.3×10-9V/V,其中OVOCs约占51%,芳香烃约占30%,烷烃约占15%,卤代烃和烯烃分别占3%和1%.平均浓度最高的前3个组分是乙醇（9.84×10-9V/V）、丙酮（6.72×10-9V/V）和甲苯（3.48×10-9V/V）.     

在线中和富集及标准加入离子色谱法测定大气吸收液中的痕量阴离子

建立了大体积进样后的在线中和富集及在线标准加入离子色谱法,实现了对大气碱性吸收液中痕量氯离子、亚硝酸根、硝酸根、硫酸根的直接测定。比较了不同阀切换时间窗及在线中和柱的选择,确定了最佳的实验条件。利用戴安公司“谱睿”在线中和技术,通过Inguard H在线中和柱和CRD 200在线二氧化碳去除装置的共同作用,有效地去除了碱性吸收液中的OH~和CO2~3,使测定干扰降低到最小;通过大体积进样和在线富集,改进了样品的检出限,Cl~, NO~2, NO~3和SO2~4的检出限分别为17.5、171、34.7和42.4 ng/L;在线标准加入解决了痕量阴离子标准溶液的配制难题及NO~2低回收率对检测结果的影响。本方法实现了自动化分析,结果准确,重复性好,检测效率高,可用于常规离子色谱条件下无法测定的强碱性基体样品中痕量阴离子的准确测定。     

Influence Du Rapport Atomique Ca/P Initial Sur La Synthèse Sous Atmosphère Humide D’apatite

Abstract

Le comportement sous atmosphère humide des mélanges initiaux de la calcite et du di-ammonium hydrogénophosphate à différents rapport atomique (Ca/P)_initiala été étudié. L’analyse par diffraction des rayons X (DRX) montre que les produits obtenus ont tous une structure apatitique. Il montre la présence à côté de celle de l’apatite, des raies identifiables à la calcite pour des rapports atomiques initiaux supérieurs à 1.50. Par ailleurs, la spectroscopie d’absorption infrarouge (IR) révèle dans les différents cas, la présence autre que les bandes attribuables aux ions PO₄ ^3?dans une apatite, des bandes à 875 cm^?1caractéristique des groupements HPO₄ ^2?dans une apatite déficiente en ion calcium. De même, le traitement thermique à 1000°C des poudres synthétisés a mis en évidence que les apatites formées sont non st?chiométriques. Les analyses chimiques montrent, par ailleurs, que lorsque le rapport atomique Ca/P du mélange initial est inférieur à 1.50, l’apatite formée a un rapport atomique Ca/P égal à 1.58. Par contre, lorsque le rapport Ca/P initial est supérieur à 1.50, le produit formé est biphasique et a un rapport atomique Ca/P de 1.62. Ce rapport est dû essentiellement à la présence d’un excès de CaCO₃dans le mélange initial (DRX, IR).

Mots clés Apatite; atmosphère humide; calcite; hydrothermal; synthèse

Abstract The behavior, in a humid atmosphere, of the initial mixtures of calcite and diammonium hydrogenophosphate at different atomic ratio (Ca/P) was studied. The X-ray diffraction (XRD) analysis shows that all the products obtained have apatite structure. For initial atomic ratios greater than 1.50, the XRD analysis shows the presence of reflections different from those of apatite, which may be attributed to calcite. Analysis by infrared (IR) absorption spectroscopy allows to distinguish between the two cases: in addition to the presence of bands due to the PO₄ ^3?ions in apatite further bands at 875 cm^?1characteristic of HPO₄ ^2?in apatite deficient with respect to calcium ions are observed. Similarly, the powders synthesized by heat treatment at 1000°C showed that nonstoichiometric apatites are formed. Chemical analyses show, that when the atomic ratio Ca/P of the initial mixture is less than 1.50, the apatite formed has an atomic Ca/P ratio of 1.58. When the initial Ca/P ratio is greater than 1.50, the product formed is biphasic and has an atomic ratio Ca/P of 1.62. This result is mainly due to the presence of an excess of CaCO₃in the original mixture (XRD, IR).     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.