Spectral‐Luminescence and Generation Properties of 1‐Aza‐2‐Methyl‐6‐Aminopyrene and of Its Protolytic Forms

Spectral manifestations of protolytic forms of 1aza2methyl6aminopyrene in ethanol and aqueous solutions are investigated. The ionization constants of the protolytic forms are determined. The generation properties and photostability of a neutral molecule and a cation in excitation by an excimer XeCl laser are studied.     

Influences of the Current Transverse Profile on the Transverse Mode Competition of VCSELs Diodes

A spatially independent model of vertical-cavity surface-emitting lasers (VCSELs) is derived by integrating the spatially dependent rate equations over the cross section of the cavity of a VCSEL. The angular and radial non-uniformities of the injection current are taken into account. The well-known LP modes of a weakly-guiding cylindrical waveguide are employed to describe the transverse modal structure in the VCSEL cavity. This model is solved in a self-consistent way by using the 4th order Runge-Kutta method. The dependence of transverse mode competition on the current intensity, the angular and radial non-uniformities of the injection current, and the geometrical parameters of the electrical contact are thoroughly investigated and analyzed. The results are useful to the optimum design of the optical transverse modal structure of VCSELs.     

Combination of two basic types of synchronization in a coupled semiconductor laser system

Combination of two basic types of synchronization, anticipatory synchronization and lagged synchronization, is investigated numerically between two coupled semiconductor lasers. It is found that lagged synchronization produced by a backward coupling with a suitable delay can combine with the originally hidden anticipatory synchronization and produce a type of synchronization overcoming the original lagged synchronization produced by a forward coupling. We study the combination synchronization phenomenon when the delay of the backward coupling is different from that of the original anticipatory synchronization. Our results suggest that the synchronization combination phenomenon might allow an interpretation of an experimental observation by Sivaprakasam et al. [Phys. Rev. Lett. 87, 154101 (2001)] that the anticipating time is irrespective of the external-cavity round trip time, which to date remains to be understood.     

How exact are simplified scalar approaches to optical fields in oxide-confined stripe-geometry diode lasers?

Optical model, scalar or vectorial one, describing behaviour of an optical field within a diode-laser cavity, is one of the most important parts of modelling of a diode-laser operation. As compared to more accurate vectorial optical approaches, scalar ones are known to be less exact but simultaneously they need much less computation time. Besides, they have been sometimes found to be surprisingly exact even beyond their confirmed range of validity. Therefore, in this paper, real validity limits of their application have been determined by comparing their simplified results with more exact results obtained with the aid of vectorial models. The analysis comprises a comparison of an application of the most popular scalar approach to optical properties of diode lasers, i.e., the effective index method, and the vectorial method of lines for the standard 1.3-μm GaAs-based stripe-geometry diode laser. The scalar model has been found to be quite exact in the case of a determination of the effective refractive index, i.e., the wavelength of emitted radiation, whereas its exactness in the lasing threshold analysis is much worse, especially in the case of higher-order modes. Our analysis is concluded with a determination of the regions where both models give satisfactorily close results.     

Injection locked multi-section gain-coupled dual mode DFB laser for terahertz generation

A dual mode multi-section gain-coupled distributed feedback laser with tunable mode spacing is subharmonically injection locked at 0.315 THz. The injected signal consists of an optical comb with harmonics 35 GHz apart and a bandwidth of approximately 1.9 THz. The optical comb is a result of strong four-wave mixing in a highly-nonlinear dispersion-shifted fiber. In order to observe locking of the multi-section laser, the output is optically downconverted to RF frequencies using the same optical comb. The locked multi-section DFB laser is a coherent and tunable optical source suitable for continuous-wave terahertz generation systems.     

22 dB all-fiber green amplifier using Er-doped fluoride fiber

We demonstrate a 22 dB all-fiber amplifier at 546 nm using Er³⁺-doped fluoride fiber by forward upconversion pumping of a 974 nm laser diode. The gain saturation effects and the power conversion efficiency of this amplifier are investigated in detail based on gain characteristics and numerical simulations.     

Locking bandwidth and birefringence effects for polarized optical injection in vertical-cavity surface-emitting lasers

The aim of this paper is to investigate the effects of external optical injection taking account of polarization and electron spin properties in vertical-cavity surface-emitting lasers (VCSELs). Using external polarized injection we seek the locked phases and amplitudes of specific polarized fields in terms of injection level and frequency detuning, taking account of two kinds of distinguishable carrier density (spin-up and spin-down). For the conventional form of optical injection without taking account of spin-polarized fields there are three fundamental equations describing the carrier density, field amplitude and phase. However, by using the spin flip model (SFM), the combined effect of polarized fields along two perpendicular crystal axes and electron spin properties results in six equations. We analyse the conditions for stable locking and also the influence of birefringence effects on the stability map of detuning versus optical injection for both cases of injection polarized parallel and perpendicular to the lasing mode of the solitary VCSEL. For given values of pumping and spin relaxation rate there is a minimum birefringence rate for orthogonal injection. Above this value three regions of elliptical polarization are found in the stability map, namely “quasi-stability” (QS), “coupled limit cycle” (CLC) and “coupled chaos” (CC). The three regions of linear polarization, namely chaos, limit cycle and stability, are reduced in area compared to the case of parallel injection. For orthogonal injection it is found that increased birefringence or reduced spin relaxation rate causes the stable locking region to begin at higher injected power and frequency detuning.     

Optimization of facet coating for highly strained InGaAs quantum well lasers operating at 1200 nm

The optical output power of a laser diode can be enhanced by anti-reflection (AR) and high-reflection (HR) facet coatings, respectively, at the front and back facet. AR and HR coatings also serve the purpose of protection and passivation of laser diode facets. In this work, we have designed and optimized a single layer λ/4 thick Al₂O₃ film for the AR coating and a stack of λ/4 thick Al₂O₃/λ/4 thick Si bi-layers for the HR coating for highly strained InGaAs quantum-well edge emitting broad area (BA) laser diodes. Effect of the front and back facet reflectivities on output power of the laser diodes has been studied. The light output versus injected current (L–I characteristics) measurements were carried out on selected devices before and after the facet coatings. We have also carried out the numerical simulation and analysis of L–I characteristics for this particular diode structure. The experimental results have been compared and verified with the numerical simulation.     

Suppression of Q-switching instabilities in broadened-waveguide monolithic mode-locked laser diodes

It is predicted theoretically that broadening the optical confinement layer in monolithic mode-locked semiconductor lasers may suppress Q-switching instability, by increasing the carrier transport time, and lead to emission of shorter, more stable optical pulses.     

Ultraviolet Photodissociation: Developments towards Applications for Mass‐Spectrometry‐Based Proteomics

Unraveling of all of the information contained in proteomes poses a tremendous chemical challenge, which is balanced by the promise of potentially transformational knowledge. Mass spectrometry offers an unprecedented arsenal of tools for diverse proteomic investigations. Recently, it was demonstrated that ultraviolet light can be utilized to initiate unique and potentially useful fragmentations in peptides and proteins. Either nonspecific dissociation or highly specific dissociation at engineered chromophoric sites is possible following photon absorption. The level of specificity and control over fragmentation in these experiments is greater than with other fragmentation methods. Novel techniques made possible by this technology are poised to make substantial contributions to the field of proteomics.