Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

Taking snapshots of photoexcited molecules in disordered media by using pulsed synchrotron X-rays

Photoexcited molecules are quintessential reactants in photochemistry. Structures of these photoexcited molecules in disordered media in which a majority of photochemical reactions take place remained elusive for decades owing to a lack of suitable X-ray sources, despite their importance in understanding fundamental aspects in photochemistry. As new pulsed X-ray sources become available, short-lived excited-state molecular structures in disordered media can now be captured by using laser-pulse pump, X-ray pulse-probe techniques of third-generation synchrotron sources with time resolutions of 30-100 ps, as demonstrated by examples in this review. These studies provide unprecedented information on structural origins of molecular properties in the excited states. By using other ultrafast X-ray facilities that will be completed in the near future, time-resolution for the excited-state structure measurements should reach the femtosecond time scales, which will make "molecular movies" of bond breaking or formation, and vibrational relaxation, a reality.     

Particle velocity measurements in induction plasma spraying

Laser Dopple anemometry (LDA) measurements of the particle velocity are carried out during an induction plasma spraying operation. The velocity of nickel alloy particles, or molten droplets, at the exit of an induction plasma torch prior to impact on the substrate is shown to vary with the plasma and powder injection conditions. Plasma spraying under soft vacuum (150–450 Torr) gives rise to substantially higher particle velocities (40–60 m/sec) compared to those attained at atmospheric pressure (10–20 m/sec).     

Impedance laser spectroscopy in a small RF-excited neon discharge

Laser impedance spectroscopy in a miniature neon RF-discharge operating at 0.27 bar was performed. The dominant role of the metastable atoms to the size and the sign of the RF-signal was investigated. Excellent linearity of the RF-signal but poor detection sensitivity of excited metastable neon atoms were found at low laser powers.     

聚丙烯酰胺凝胶结构非均匀性的动态光散射研究

利用动态光散射技术研究了聚丙烯酰胺 (PAAm)凝胶结构的非均匀性 ,分析了PAAm凝胶结构非均匀性的形成原因及凝胶动态光散射的数据处理方法和分析结果的物理意义 .研究结果表明 ,PAAm凝胶中含有动态相关长度 (LC)不同的两相 ,其中 ,LC 为 10～ 2 0nm的区域是聚合物稀疏相 ,LC 为 85nm左右的区域是聚合物密集相 ,两相的不均匀分布形成了PAAm凝胶结构的非均匀性 .分析表明 ,PAAm凝胶存在两相主要是由于单体和交联剂的溶解度存在差异所致 .随交联度增大 ,PAAm凝胶结构的非均匀性显著增强     

Silica nanoparticles for separation of biologically active amines by capillary electrophoresis with laser-induced native fluorescence detection

This paper describes the analysis of biologically active amines by capillary electrophoresis (CE) in conjunction with laser-induced native fluorescence detection. In order to simultaneously analyze amines and acids as well as to achieve high sensitivity, 10 mM formic acid solutions (pH < 4.0) containing silica nanoparticles (SiNPs) were chosen as the background electrolytes. With increasing SiNP concentration, the migration times for seven analytes decrease as a result of increase in electroosmotic flow (EOF) and decrease in their electrophoretic mobilities against EOF. A small EOF generated at pH 3.0 reveals adsorption of SiNPs on the deactivated capillary wall. The decreases in electrophoretic mobilities with increasing SiNP concentration up to 0.3x indicate the interactions between the analytes and the SiNPs. Having a great sensitivity (the limits of detection at a signal-to-noise ratio (S/N) = 3 of 0.09 nM for tryptamine (TA)), high efficiency, and excellent reproducibility (less than 2.4% of the migration times), this developed method has been applied to the analysis of urinal samples with the concentrations of 0.50 +/- 0.02 microM, 0.49 +/- 0.04 microM, and 74 +/- 2 microM for TA, 5-hydroxytryptamine, and tryptophan, respectively. The successful examples demonstrated in this study open up a possibility of using functional nanoparticles for the separation of different analytes by CE.     

Chemical maps of patterned samples by microline‐imaging laser‐induced plasma spectrometry

The potential of a microline‐imaging laser‐induced plasma spectrometry (LIPS) system for surface and depth analysis of heterogeneous solid samples in air at atmospheric pressure has been demonstrated. A pulsed Nd : YAG laser beam operating at 532 nm, with a homogeneous energy distribution (flat top laser), was used to generate a microline plasma on the sample surface. Subsequent light from the microline plasma was resolved spectrally and spatially and detected with an imaging spectrograph and an intensified charged‐coupled device detector. A patterned metal sample was chosen as the most appropriate for this study. Three‐dimensional chemical maps of Ni and Cu from the edge connectors of a printed circuit board have been obtained. With this experimental configuration, the lateral resolution (limited by crater width) was 42 µm and the spatial resolution along the spectrometer slit was 17.4 µm. The results illustrate the capability of microline imaging for fast mapping of large‐area samples and for depth profiling purposes. Copyright © 2003 John Wiley & Sons, Ltd.     

Two-color photoionization spectroscopy of jet-cooled nickelocene

Two-photon ionization of the nickelocene molecules cooled in a supersonic jet was performed for the first time by simultaneous excitation of (⁵–C₅H₅)2Ni with two tunable nano- second dye lasers. The one-photon transition from the HOMO to the Rydberg R4p level was used as the initial step of the multiphoton excitation. In a one-color experiment, the conditions were found for generation of the intact molecular ion, (⁵–C₅H₅)2Ni⁺, as the only ionic product of the multiphoton ionization. The use of an intense pulse of the second dye laser lead to an increase in the yield of the molecular ion.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1604–1606, August, 2004.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Solution Stoichiometry Control for Pure LiLaMo2O8Phases in Sol-Gel Preparation

The hydrolysis of solutions, containing either LiMo₂O₄(OPr ⁱ )₅( ⁱ PrOH) and “La(OPr ⁱ )₃” or LiOPr ⁱ and La₂Mo₄O₈(OPr ⁱ )₁₄ in 1∶1 ratio, in toluene or ⁱ PrOH, by water solutions in isopropanol, leads to formation of monolythic gels. The latter can be converted by drying and heat treatment at 600°C into a fine powder of pure α-LiLaMo₂O₈ phase, which is transformed into β-LiLaMo₂O₈ powder by annealing at 800°C. The sintering of the pellets pressed under 4 bar pressure of α-LiLaMo₂O₈ powder at 800°C for 2 h converts them into pieces of β-LiLaMo₂O₈ transparent ceramics, thus providing a route to LiLnMo₂O₈ laser waveguide materials.