Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.     

Conformational studies of soluble and immobilized frog epidermis tyrosinase by fluorescence

Fluorescence spectra and soluble quenching of intrinsic protein fluorescence were used as indexes of conformational changes suffered by frog epidermis tyrosinase. The activation process and the immobilization of the enzyme involving either free amino groups or its carbohydrate moiety were studied. The conformational changes resulting from denaturation of each one of the protein derivatives, as well as the effect of active center copper extraction, were followed by fluorescence studies. The results showed that: (a) both activation and immobilization were accompanied by conformational changes of the protein leading to more unfolded states; (b) neither enzyme nor immobilized enzyme were fully unfolded upon denaturation although enzymic activity was lost; (c) the enzyme immobilized through its carbohydrate moiety was more unfolded upon denaturation than the enzyme immobilized through amino groups, thus pointing to a higher conformational stabilization in the last situation; and (d), that tryptophyl residues moved to a localization near the active site upon activation.     

Phosphaniminato-Trichloroselenate(II): Synthese und Kristallstrukturen von [SeCl(NPPh3)2]+SeCl3− und [Me3SiN(H)PMe3]2+[Se2Cl6]2−

Phosphorane Iminato-Trichloroselenates(II): Syntheses and Crystal Structures of [SeCl(NPPh₃)₂]⁺SeCl₃^? and [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? [SeCl(NPPh₃)₂]⁺SeCl₃^? has been synthesized by the reaction of Se₂Cl₂ with Me₃SiNPPh₃ in acetonitrile solution, forming orangered crystals, whereas red crystals of [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2? were obtained by the reaction of Me₃SiNPMe₃ with SeOCl₂ in acetonitrile solution. Both complexes were characterized by X-ray structure determinations. [SeCl(NPPh₃)₂]⁺SeCl₃^?: Space group P2₁/n, Z = 4, structure solution with 7 489 observed unique reflections, R = 0.057. Lattice dimensions at ?60°C: a = 1 117.0; b = 2 241, c = 1 407.5 pm, β = 95.61°. In the cation [SeCl(NPPh₃)₂]⁺ the selenium atom is φ-tetrahedrally coordinated by the chlorine atom and by the nitrogen atoms of the phosphorane iminato ligands, whereas the anion SeCl₃^? has a T-shaped structure with φ-trigonal-bipyramidale surrounding of the selenium atom. [Me₃SiN(H)PMe₃]₂⁺[Se₂Cl₆]^2?: Space group P2₁/c, Z = 4, structure solution with 2 093 observed unique reflections, R = 0.080. Lattice dimensions at ?70°C: a = 956, b = 828, c = 1 973 pm, β = 93.80°. The structure consists of [Me₃SiN(H)PMe₃]⁺ ions and planar [Se₂Cl₆]^2? anions, in which the selenium atoms are bridged nearly symmetrically by two chlorine atoms.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

原子荧光光谱法测定砷过程中还原反应条件的优化

自然界中砷和砷的化合物一般可通过水、大气和食物等途径进入人体,危害人体健康,原子荧光光谱法测定砷含量被广泛应用。为准确测定样品中砷的含量,以原子荧光光谱法(AFS)测定土壤中总砷含量为例,重点研究高价态砷(Ⅴ)还原为低价态砷(Ⅲ)的实验条件,采用正交实验进行条件优化,建立适合的实验方法。通过设计L9(34)正交实验,高价态砷的还原反应与四个因素有关,即与反应温度、反应时间、盐酸加入量和硫脲的用量呈一定的正相关,结果表明,四个因素中硫脲用量的影响最为显著,其次是盐酸加入量、反应时间和反应温度。通过对四个因素的多水平检验,优化后的实验条件为：硫脲用量2.0 mL、盐酸加入量10%、反应时间20 min、温度20～35 ℃(即普通室温)。采用土壤标准物质验证优化后条件的可行性,得出砷的测定值在标准值范围内,RSD在2.2%～4.2%,精密度和准确性均满足质控要求。优化后的实验条件使得操作简便易行,提高了工作效率。     

Optimal Energy-Storage Configuration for Microgrids Based on SOH Estimation and Deep Q-Network

Energy storage is an important adjustment method to improve the economy and reliability of a power system. Due to the complexity of the coupling relationship of elements such as the power source, load, and energy storage in the microgrid, there are problems of insufficient performance in terms of economic operation and efficient dispatching. In view of this, this paper proposes an energy storage configuration optimization model based on reinforcement learning and battery state of health assessment. Firstly, a quantitative assessment of battery health life loss based on deep learning was performed. Secondly, on the basis of considering comprehensive energy complementarity, a two-layer optimal configuration model was designed to optimize the capacity configuration and dispatch operation. Finally, the feasibility of the proposed method in microgrid energy storage planning and operation was verified by experimentation. By integrating reinforcement learning and traditional optimization methods, the proposed method did not rely on the accurate prediction of the power supply and load and can make decisions based only on the real-time information of the microgrid. In this paper, the advantages and disadvantages of the proposed method and existing methods were analyzed, and the results show that the proposed method can effectively improve the performance of dynamic planning for energy storage in microgrids.     

基于有限元模拟的超声应力系数标定及分析*

应力系数的标定作为超声应力检测最为关键的环节,直接决定应力检测结果的准确性。传统的应力系数试验标定对于被测物的表面粗糙度、耦合剂厚度、声匹配块与被测物接触力等因素十分敏感,但缺少基本参照值。基于COMSOL建立多物理场耦合的超声应力检测模型,施加不同的拉伸载荷,计算临界折射纵波到达时间与不同应力值之间的关系,模拟标定45#钢的超声应力系数为13.7MPa/ns。单轴水平拉伸试验标定的45#钢应力系数为16.5MPa/ns。结果表明,通过两种方法标定的应力系数较为接近,试验标定的应力系数偏大,这是由于有限元方法能够消除试验过程中各种不确定因素对声时精确测量所造成的影响,能够更加纯粹的反映材料的声弹性效应,因此具有作为基础数据的参考价值。有限元方法作为传统试验方法的补充,可以减小试验标定数据的离散性,提高超声应力检测结果的可信度。     

Conditions to Control Furan Ring Opening during Furfuryl Alcohol Polymerization

The chemistry of biomass-derived furans is particularly sensitive to ring openings. These side reactions occur during furfuryl alcohol polymerization. In this work, the furan ring-opening was controlled by changing polymerization conditions, such as varying the type of acidic initiator or the water content. The degree of open structures (DOS) was determined by quantifying the formed carbonyl species by means of quantitative ¹⁹F NMR and potentiometric titration. The progress of polymerization and ring opening were monitored by DSC and FT-IR spectroscopy. The presence of additional water is more determining on ring opening than the nature of the acidic initiator. Qualitative structural assessment by means of ¹³C NMR and FT-IR shows that, depending on the employed conditions, poly(furfuryl alcohol) samples can be classified in two groups. Indeed, either more ester or more ketone side groups are formed as a result of side ring opening reactions. The absence of additional water during FA polymerization preferentially leads to opened structures in the PFA bearing more ester moieties.