小孔阵列衍射特性与应用

以单色标量波衍射理论为基础,研究了均匀平面波从不同角度入射小孔阵列的衍射特性。运用单孔衍射理论,同时考虑相邻小孔间衍射光强的相互影响,建立了小孔阵列衍射的理论模型和光强分布的数值积分式,小孔为硬边小孔。利用Matlab对500 nm波长的平面波入射微小方孔阵列衍射图样进行了计算机仿真,得到了不同几何参量下平面波从不同角度入射时的衍射图样的一维和二维光强分布图,并将仿真结果用于微型数字式太阳敏感器的光学系统中的结构参量设计和图像处理中的参量确定。太阳敏感器的成像实验结果表明,小孔阵列衍射光强分布图的仿真结果正确、太阳敏感器光学系统参量设计合理。小孔阵列衍射理论为太阳敏感器的光学系统设计和图像处理提供了可靠的理论基础。     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。     

基于物理中面FGM板屈曲的有限元分析

基于物理中面的概念,根据最小势能原理推导了功能梯度材料FGM薄板屈曲的有限元控制方程,求得临界荷载的有限元解。利用FGM板的屈曲方程与参考均匀板的屈曲方程之间的相似性,建立了FGM板的临界荷载与参考均匀板的临界荷载之间的相似转换关系式,从而将FGM板临界荷载的计算转变为参考均匀板的临界荷载和材料不均匀系数的计算,极大地提高了计算效率,为FGM的推广起积极的推动作用。通过数值算例,将由有限元法和转换关系式得到的临界荷载进行了比较,并讨论了边界条件、荷载工况、材料组成和几何尺寸等对FGM板临界荷载的影响。     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Numerical study of a well boat operating at a fish farm in current

Dynamic response of a well boat operating at a fish farm in current is investigated numerically. An objective is to determine the operational conditions of the well boat. In terms of the fish farm, a realistic set-up (with single cage) is considered, including a floating collar, an elastic sinker tube, a flexible-closed net cage and a complex mooring system. A time-domain solution is used to find the steady configuration and response. Transverse viscous current loads are estimated using the cross-flow principle. The drag coefficients are obtained empirically by considering cross-sectional details, free surface and three-dimensional (3D) flow effects. The drag force is experimentally validated. The effect of the ship wake on the net loading is also assessed.The most critical scenario with the well boat placed at the weather side of the fish farm is analyzed in detail. Critical response variables for operational limits are the maximum anchor-line tensions and floater stresses. Numerical results show that the anchor loads will increase more than 40% in small current velocities and up to 90% in high current velocities due to the viscous current loads on the boat. There is also a strong increase of the floating collar deformations and stresses when the well boat is in contact with the floating collar.A sensitivity analysis has been carried out to identify the physical parameters affecting the anchor loads and the maximum stress in the floating collar. From our studies, the anchor loads are more sensitive to current direction, bottom weight system, sinker tube depth and mooring line properties (pretension load, anchor chain weight, etc.) and less sensitive to other parameters such as floating collar stiffness and cross-sectional drag coefficients of the well boat. The shading effect of the well boat on the fish-farm inflow has been examined and appeared not negligible with 4% to 10% reduction of the anchor loads for the studied current conditions. The maximum stress in the floating collar is sensitive to well-boat loads related parameters (current direction, cross-sectional drag coefficient) and pretension load in the anchor line; not so sensitive to net loading related parameters such as sinker tube depth and sinker tube weight.Lastly, the operational conditions of the well boat at the fish farm were discussed. Numerical results show that the maximum stresses in the floating collar should be of major concern. The loads in the mooring lines are moderate compared with the corresponding breaking limits.     

Intelligent Reflecting Surface–Assisted Wireless Secret Key Generation against Multiple Eavesdroppers

In this paper, we propose an improved physical layer key generation scheme that can maximize the secret key capacity by deploying intelligent reflecting surface (IRS) near the legitimate user aiming at improving its signal-to-noise ratio (SNR). We consider the scenario of multiple input single output (MISO) against multiple relevant eavesdroppers. We elaborately design and optimize the reflection coefficient matrix of IRS elements that can improve the legitimate user’s SNR through IRS passive beamforming and deteriorate the channel quality of eavesdroppers at the same time. We first derive the lower bound expression of the achievable key capacity, then solve the optimization problem based on semi-definite relaxation (SDR) and the convex–concave procedure (CCP) to maximize the secret key capacity. Simulation results show that our proposed scheme can significantly improve the secret key capacity and reduce hardware costs compared with other benchmark schemes.     

四元轻稀土硝酸盐水溶液体系{H2O+La(NO3)3+Pr(NO3)3+Nd(NO3)3}的热力学研究

在298.15 K条件下, 利用等压法研究了四元轻稀土硝酸盐水溶液{H2O La(NO3)3 Pr(NO3)3 Nd(NO3)3}及其3个二元亚系{H2O La(NO3)3}, {H2O Pr(NO3)3}和{H2O Nd(NO3)3}的热力学性质. 以NaCl或CaCl2水溶液为参考溶液, 测定了不同水活度条件下该四元溶液的渗透系数及各溶质组元的活度系数. 实验结果表明, 上述四元系与其3个二元亚系之间存在简单共性, 在实验误差允许范围之内(|Δ|≤0.0010), 该四元系符合偏理想溶液模型.     

微量元素对宝玉石物理性质的影响

微量元素的介入对宝石的形成是极其重要的。它们在宝石内部或发生类质同象替代，改变了宝石的一些物理性质，如宝石的颜色、荧光、折射率、密度，也会增加宝石一些特殊的光学效应，如变色效应，使宝石的外观变得更加绚丽多彩。     

乙酰胺-氯化锌新型离子液体的合成及物化性质

合成了CH3CONH2-ZnCl2体系离子液体;利用红外光谱仪分析了CH3CONH2-ZnCl2离子液体的化学特征,采用步冷曲线法绘制了CH3CONH2-ZnCl2二元体系熔点图,测定了其物化性质.结果表明,CH3CONH2-ZnCl2二元体系的最低熔点为8℃;当CH3CONH2与ZnCl2的摩尔比为3:1时,Zn2+...     

Ionic Liquids for and by Analytical Spectroscopy

Abstract

In this mini‐review we highlight two aspects of ionic liquids that to date have either no or limited studies. They are (1) exploitation of unique features of ionic liquids to develop novel spectroscopic methods and (2) development of novel spectroscopic methods, for the sensitive and accurate determination of thermal physical properties of ionic liquids. In the first category, we will describe several novel methods which were developed utilizing unique properties of ionic liquids for measurements which are not possible otherwise. They include the sensitive and accurate method to determine enantiomeric compositions of a variety of pharmaceutical products with different size, shape, and functional groups. This method is based on the use of a chiral IL which serves both as a solvent and also as a chiral selector. Ionic liquids have also been successfully used to substantially enhance the sensitivity of thermal lens measurements. In the second category, we will describe recent development in which transient grating technique and thermal lens technique have been successfully used for the sensitive, accurate, nondestructive determination of thermal physical properties of ILs.