狭缝式高速摄影机胶片的计算机判读

根据狭缝摄影机胶片的成象原理,运用数字图象处理技术,对狭缝式高速摄影机胶片判读工作的计算机化进行研究.应用结果表明,该技术先进实用,极大地提高了判读的精度和效率,将是这种胶片判读技术的发展方向.     

含色散介质的一维光子晶体微腔的透射谱

研究了含色散介质的一维光子晶体微腔的透射谱,对色散介质采用Lorentz振子模型,腔模的频率设置在光子晶体带隙中心。发现当吸收可以忽略时,色散效应将导致在腔模附近有很高的态密度,与此相应地在透射谱中出现一个较宽的透射带。当吸收存在时透射带中心的透射峰消失,但带尾的透射峰依然存在。     

Performance and simulation of an on-board guided-wave optical processor for airborne SAR applications

This paper describes the performance and simulation of a compact integrated optical processor for the real-time reconstruction of two-dimensional images in airborne stripmap synthetic aperture radar applications. The functional behavior of the processor is explained in some detail. The design criteria are briefly given. The simulation step allowed the main processor characteristics and properties to be identified. A number of comparisons were obtained in airborne SAR mission scenarios between the predictions of the optical device and those achieved by the modern electronic digital approach, based on the wavefront reconstruction method by matched filtering.     

二维正方各向异性碲圆柱光子晶体完全禁带中缺陷模的FDTD计算分析和设计

用FDTD方法计算了二维正方晶胞各向异性碲圆柱光子晶体的点缺陷模.为了得到TE,TM模式在完全禁带中具有相同共振频率的缺陷模,对中心点缺陷半径Rd以及中心附近对称位置的点缺陷半径Rn做了一系列微调.计算表明,TM模对于Rn的变化不敏感,而TE模随着Rn的改变出现了明显的规则的移动趋势.通过计算分析,发现对应于f=0.4的背景(R=0.3568a),当Rd=0.55a,Rn=0.26a时在完全禁带中TE和TM的缺陷模具有相同的共振频率ω0=0.2466ωe(其中ωe=2πca,a为晶格常数) 关键词： 时域有限差分法 光子晶体 缺陷模 各向异性     

高功率微波高斯馈源口面场分析

 用波导本征模展开方法对用于高功率微波发射系统的方角锥高斯馈源口面场进行分析，提出结合馈源远场辐射特性和避免高功率击穿折衷选定相应的高斯模注腰半径，进而确定多个波导模幅值，从而为运用模匹配或耦合波理论设计高斯馈源提供依据。     

Joint detection of a given number of reference fragments in a quasi-periodic sequence and its partition into segments containing series of identical fragments

The problem of joint a posteriori detection of reference fragments in a quasi-periodic sequence and its partition into segments containing series of recurring fragments from the reference tuple is solved. It is assumed that (i) an ordered reference tuple of sequences to be detected is given, (ii) the number of desired fragments is known, (iii) the index of the sequence term corresponding to the beginning of a fragment is a deterministic (not random) value, and (iv) a sequence distorted by an additive uncorrelated Gaussian noise is available for observation. It is established that the problem consists in testing a set of hypotheses about the mean of a random Gaussian vector. The cardinality of the set grows exponentially as the vector dimension (i.e., the sequence length) increases. An efficient a posteriori algorithm producing a maximum-likelihood optimal solution to the problem is substantiated. Time and space complexity bounds related to the parameters of the problem are derived. The results of numerical simulation are presented.     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

Tunable properties of light propagation in photonic liquid crystal fibers

Tunable properties of light propagation in photonic crystal fibers filled with liquid crystals, called photonic liquid crystal fibers (PLCFs) are presented. The propagation properties of PLCFs strongly depend on contrast between refractive indices of the solid core (pure silica glass) and liquid crystals (LCs) filing the holes of the fiber. Due to relatively strong thermo-optical effect, we can change the refractive index of the LC by changing its temperature. Numerical analysis of light propagation in PLCF, based on two simulation methods, such as finite difference (FD) and multipole method (MM) is presented. The numerical results obtained are in good agreement with our earlier experimental results presented elsewhere [1].     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

Approximating schedules for dynamic process graphs efficiently

A model for parallel and distributed programs, the dynamic process graph (DPG), is investigated under graph-theoretic and complexity aspects. Such graphs embed constructors for parallel programs, synchronization mechanisms as well as conditional branches. They are capable of representing all possible executions of a parallel or distributed program in a very compact way. The size of this representation can be as small as logarithmic with respect to the size of any execution of the program.

In a preceding paper [A. Jakoby, et al., Scheduling dynamic graphs, in: Proc. 16th Symposium on Theoretical Aspects in Computer Science STACS'99, LNCS, vol. 1563, Springer, 1999, pp. 383–392] we have analysed the expressive power of the general model and various variants of it. We have considered the scheduling problem for DPGs given enough parallelism taking into account communication delays between processors when exchanging data. Given a DPG the question arises whether it can be executed (that means whether the corresponding parallel program has been specified correctly), and what is its minimum schedule length.

In this paper we study a subclass of dynamic process graphs called -output DPGs, which are appropriate in many situations, and investigate their expressive power. In a previous paper we have shown that the problem to determine the minimum schedule length is still intractable for this subclass, namely this problem is -complete as is the general case. Here we will investigate structural properties of the executions of such graphs. A natural graph-theoretic conjecture that executions must always split into components that are isomorphic to subgraphs turns out to be wrong. We are able to prove a weaker property. This implies a quadratic upper bound on the schedule length that may be necessary in the worst case, in contrast to the general case, where the optimal schedule length may be exponential with respect to the size of the representing DPG. Making this bound constructive, we obtain an approximation to a -complete problem. Computing such a schedule and then executing the program can be done on a parallel machine in polynomial time in a highly distributive fashion.