Copolymers containing a spiro orthoester moiety that undergo no shrinkage during cationic crosslinking

A spiro orthoester with an exomethylene group (exoSOE) was radically copolymerized with acrylonitrile or vinyl acetate at several feed ratios to obtain the corresponding copolymers having spiro orthoester moieties in the side chain. The obtained copolymers could be crosslinked via the double ring‐opening polymerization of the spiro orthoester moieties in their side chain by a treatment with BF₃OEt₂. The volume changes upon the crosslinking of the copolymers were evaluated by density measurements with a micromeritics gas pycnometer. The copolymers experienced less than 1% volume expansion instead of volume shrinkage during typical cationic crosslinking, regardless of the copolymer compositions. Negligible shrinkage was observed during the thermal cationic crosslinking of a film cast from a nitrobenzene solution of the copolymers containing a benzylthiophenium salt as a thermally latent cationic initiator. The constantly low volume changes during the crosslinking of the copolymers from exoSOE probably depended on the almost zero volume change during the cationic polymerizations of spiro orthoester derivatives. This indicates that exoSOE is an effective monomer for crosslinkable polymers without volume changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3666–3673, 2006     

Synthesis of copolymers containing a spiro orthocarbonate moiety and evaluation of the volume change during their cationic crosslinking

Spiro orthocarbonate (SOC) monomers having either an exomethylene group {3,3‐dimethyl‐9‐methylene‐1,5,7,11‐tetraoxaspiro[5.5]undecane (ExoSOC)} or an allyl group {9‐allyl‐3,3‐dimethyl‐1,5,7,11‐tetraoxaspiro[5.5]undecane (AllylSOC)} were radically copolymerized with vinyl monomers at several feed ratios to obtain the corresponding copolymers having SOC moieties in the side chain. The obtained copolymers were crosslinked via the double ring‐opening polymerization of the SOC moieties by a treatment with boron trifluoride etherate. The volume changes during the crosslinking of the copolymers were evaluated by density measurements with a gas pycnometer. As the SOC moiety composition increased, the volume shrinkage during the crosslinking was suppressed, and that finally changed into volume expansion. The volume changes during the crosslinking of the copolymers from AllylSOC were slightly larger than those of the copolymers from ExoSOC. The higher volume expansions in the crosslinking of AllylSOC‐based copolymers were ascribable to the lower steric hindrance around the SOC moieties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7040–7053, 2006     

Block copolymer mediated synthesis of amphiphilic gold nanoparticles in water and an aqueous tetrahydrofuran medium: An approach for the preparation of polymer–gold nanocomposites

The synthesis of polymer‐matrix‐compatible amphiphilic gold (Au) nanoparticles with well‐defined triblock polymer poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] and diblock polymers poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], polystyrene‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate], and poly(t‐butyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate] in water and in aqueous tetrahydrofuran (tetrahydrofuran/H₂O = 20:1 v/v) at room temperature is reported. All these amphiphilic block copolymers were synthesized with atom transfer radical polymerization. The variations of the position of the plasmon resonance band and the core diameter of such block copolymer functionalized Au particles with the variation of the surface functionality, solvent, and molecular weight of the hydrophobic and hydrophilic parts of the block copolymers were systematically studied. Different types of polymer–Au nanocomposite films [poly(methyl methacrylate)–Au, poly(t‐butyl methacrylate)–Au, polystyrene–Au, poly(vinyl alcohol)–Au, and poly(vinyl pyrrolidone)–Au] were prepared through the blending of appropriate functionalized Au nanoparticles with the respective polymer matrices {e.g., blending poly[2‐(N,N‐dimethylamino)ethyl methacrylate]‐b‐poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino)ethyl methacrylate‐stabilized Au with the poly(methyl methacrylate)matrix only}. The compatibility of specific block copolymer modified Au nanoparticles with a specific homopolymer matrix was determined by a combination of ultraviolet–visible spectroscopy, transmission electron microscopy, and differential scanning calorimetry analyses. The facile formation of polymer–Au nanocomposites with a specific block copolymer stabilized Au particle was attributed to the good compatibility of block copolymer coated Au particles with a specific polymer matrix. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1841–1854, 2006     

Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

Freezing temperatures and densities of solutions of some hydrocarbons and sodium oleate inN-methylacetamide. Evidence for a solvophobic interaction

The freezing temperatures and densities (at 31°C) of solutions of octane, nonane, decane, 3,3-diethylpentane, and sodium oleate inN-methylacetamide (NMA) have been measured. The molality of the freezing solution was calculated from the density. The solubilities of octane, nonane, and decane inN-methylacetamide are also reported. Apparent molal volumes calculated from the densities are close to the values in the pure hydrocarbons and are not strong functions of the concentration. This indicates the absence of any unusual packing effect. The calculated free energies of transfer of the hydrocarbons from pure hydrocarbon to NMA solution are much less negative than the corresponding values for water, showing that the bulk solvophobic interaction inN-methylacetamide is smaller than in water. This is consistent with the freezing temperatures of sodium oleate which show that micelles do not form below 0.1 mole-kg^–1. The osmotic coefficients of the hydrocarbons calculated from the freezing temperatures showed negative deviations from ideality that were larger for the hydrocarbons with the higher molecular weights. Two estimates of the pairwise solvophobic interaction inN-methylacetamide indicate that it is also smaller than in water. The solvophobic effect in this solvent does not include the large entropy and enthalpy effects found in aqueous solutions.     

Spin Density Distribution in 2,4,6-Triphenylphenoxyl

The distribution of the unpaired electron over the oxygen and the 24 carbon atoms in the free 2,4,6-triphenylphenoxy radical was determined by electron spin resonance spectroscopy and quantum-mechanical approximation methods. The hyperfine splitting was evaluated with the aid of the spectra of triphenylphenoxyls deuterated in some or all of the substituent phenyl groups. The results of the quantum-mechanical approximations were checked by recording the ESR spectra of triphenylphenoxyls labeled with ¹³C in positions 1,2,3, or 4 of the central ring. The spin density distribution permits a first discussion of the ¹⁷O-coupling constants of correspondingly labeled triphenylphenoxyl and other organic free radicals.     

Comparison of the Hartree-Fock,Møller-Plesset,and Hartree-Fock-Slater method with respect to electrostatic properties of small molecules

Summary The results of various quantum chemical calculations, the Hartree-Fock (HF) method, the Møller-Plesset perturbation theory (MP2), and the Hartree-Fock-Slater (HFS) method are compared. Atomic charges, dipole moments, topological properties of the electron density distribution and polarizabilities, and first hyperpolarizabilities are calculated. Atomic charges obtained with the HFS method are found to be very close to those calculated with the MP2 method, from which we conclude that the HFS method describes to some extent electron correlation effects. Performing an MP2 calculation after an HF calculation improves the molecular dipole moments considerably, yielding values close to the experimental ones. HFS calculations are computationally less demanding than MP2 and yield comparable results for the electron density distributions, dipole moments and polarizabilities.     

Tuning of the alpha-terthiophene radical cation coupling reaction using mixed micelles with varying charge density.

The photophysics and photochemistry of alpha-terthiophene (alphaT), compartmentalized in mixed nonionic/anionic micelles, have been investigated with focus on the influence of the micellar surface charge density on the formation of the radical coupling product alpha-hexathiophene (alphaH). By varying the ratio of nonionic-to-anionic surfactants, and assuming ideal mixing, the charge density of the mixed micelles was varied. From Poisson-Boltzmann calculations, performed using the cell model, the electrostatic potential and the counterion activity were estimated as a function of the distance from the micellar surface. Upon excitation, the triplet state of alphaT is formed, from which the alphaT radical cation can be formed by absorption of a second photon. The radical cation can form alphaH if it encounters another alphaT radical cation. Under the experimental conditions used, this implies that the alphaH formation only occurs if the compartmentalized radical cation is able to migrate from its host micelle to another micelle, either via the surrounding bulk or by fusion of two micelles followed by mixing of their contents before micellar fission. The formation yield of the radical cation depends on the charge density of the mixed micelle; a lower charge density, that is, an increased amount of nonionic surfactant, lowers the yield. The yield of the coupling product alphaH, however, does not follow the same trend. A maximum yield of alphaH is found at intermediate nonionic surfactant molar ratios. This behavior is understood in terms of the Poisson-Boltzmann simulation results and by comparing charge-density changes as a function of molar fraction with the changes in counterion activity. The alphaH yield is a result of the balance between an increased possibility of radical cation bulk migration and a lowered electrostatic stabilization of the radical.     

A density functional theory study on the electrocyclization of 1,2,4,6-heptatetraene analogues: converting a pericyclic to a pseudopericyclic reaction

A comprehensive B3LYP/6-31+G* study on the electrocyclization of 1,2,4,6-heptatetraene analogues was conducted. Starting from the cyclization of (2Z)-2,4,5-hexatrienal, a pericyclic disrotatory process favored by the assistance of a electron lone pair, we incorporated small modifications in its molecular structure to obtain a truly pseudopericyclic process. To this purpose electronegative atoms (fluorine and nitrogen) were added to give a more electrophilic character on the carbon atom which is attacked by the electron lone pair of the oxygen atom. The complete pathway for each reaction was determined, and changes in magnetic properties were monitored with a view to estimating the aromatization associated with each process. This information, together with the energetic and structural results, allowed us to classify the reactions as pseudopericyclic or pericyclic. Among all studied reactions only one was a truly pseudopericyclic process and another was a borderline case. The features of this unequivocally pseudopericyclic case were analyzed in depth.