多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

Quantitative measurements of Ge surface segregation during SiGe alloy growth

Ge segregation during the growth of Si_{1 − x}Ge_x alloys (x = 5, 10, 20, and 40%) was studied using X-ray photoelectron spectroscopy. The alloys were grown in thicknesses up to 20.0 nm at 500°C to measure quantitatively the amount of segregated surface Ge. The length of alloy needed to reach steady-state growth edge was found to decrease with increasing alloy concentration (4.8, 2.8, 2.4, and 2.0 nm, respectively). It was found that each alloy had a complete monolayer of Ge on the surface and an increasing amount of segregated Ge in the second layer (20, 55, 80, and 95%, respectively) during steady-state growth. An increase in the temperature of alloy growth (400–750°C) resulted in an increase in the leading edge of alloy growth but did not change the amount of segregated Ge during steady-state growth. We propose that film stress is responsible for the amount of Ge segregation.     

Development of a finite-element analysis methodology for the propagation of delaminations in composite structures

Analysing the collapse of skin-stiffened structures requires capturing the critical phenomenon of skin-stiffener separation, which can be considered analogous to interlaminar cracking. This paper presents the development of a numerical approach for simulating the propagation of interlaminar cracks in composite structures. A degradation methodology was introduced in MSC.Marc, which involved the modelling of a structure with shell layers connected by user-defined multiple-point constraints (MPCs). User subroutines were written that employ the virtual crack closure technique (VCCT) to determine the onset of crack growth and modify the properties of the user-defined MPCs to simulate crack propagation. Methodologies for the release of failing MPCs are presented and are discussed with reference to the VCCT assumption of self-similar crack growth. The numerical results obtained by using the release methodologies are then compared with experimental data for a double-cantilever beam specimen. Based on this comparison, recommendations for the future development of the degradation model are made, especially with reference to developing an approach for the collapse analysis of fuselage-representative structures. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 1, pp. 15–42, January–February, 2007.     

Number albedo measurements from stratified layers of iron,concrete and aluminium

A layer of stratified combination composed of selected radiation shielding materials acquires better shielding property. Albedo is used in such measurements as an integral measure ofγ-ray scattering. The stratified slabs of alternating heterogeneous layers have been found to have a virtual homogeneous property with a definite effective atomic number. The angular distribution of back-scattered photons as well as the total number albedo values for iron, aluminium and concrete in stratified combination for 662 keV and 1250 keV photons are reported.     

Optical design of a toroidal grating monochromator based beam line on Indus-1

In this paper, we discuss the detailed optical design of a beam line that is under construction on the synchrotron radiation source, Indus-1. Toroidal mirrors are used as pre-and post- focusing elements and a toroidal grating monochromator as a dispersing element. Using three interchangeable gratings, this monochromator will give, at a moderate resolution, a good throughput on the sample in the wavelength range 40 to 1000 Å. Effect of various parameters and their optimization on the resolution and throughput characteristics have been studied by ray tracing calculations, and presented.     

高斯光束照射下的圆盘夫琅禾费衍射

推导了高斯光束照射圆孔或圆盘的衍射场普遍表达式，计算了半波带数接近于零的情况下上述衍射场的数据，进而分析了圆盘衍射场在艾里斑中增加一个暗环的原因。     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

在ILC上用γγ→Z过程检验非对易时空标度

讨论关于在ILC用γγ到Z过程检验非对易时空能标(原文发在hep-ph/0604115). 在通常时空量子场论中, 由杨氏定理可知一个自旋为1的粒子不可能衰变为两个光子. 但在非对易时空中此过程是允许的. 因此这个过程能作为检验非对易时空的工具. ILC的光子对撞模式能实现这个过程. 如果总亮度能达到500fb^－1, 我们证明对Gamma (Z to gamma gamma)宽度的测量精度将比现有限制(<5.2×10^－5GeV)好3—4个数量级. 对非对易时空能标的检测可高达几个TeV.     

合肥光源二分割三角型光位置检测器的研制

介绍了一种用于合肥光源的二分割三角型光位置检测器的研制,对其主要性能(如灵敏度和线性范围)进行了理论分析和实际测量,测量结果与理论分析相当吻合.文中还给出了光位置测量系统的组成