Br-掺杂Bi2WO6的水热法合成及其可见光催化性能

以Bi（NO₃）₃·5H₂O和Na₂WO₄·2H₂O为主要原料,采用水热法合成了纯相Bi₂WO₆,并对其进行非金属离子Br^-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br^-掺杂对Bi₂WO₆的物相结构、形貌和可见光催化性能的影响。结果表明,Br^-掺杂可有效提高Bi₂WO₆的可见光催化性能,当掺杂量（物质的量百分数）为8%时,溴掺杂Bi₂WO₆的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi₂WO₆相比,其降解率提高了36.32%。     

Preparation and Characterization of Nanocrystalline Fe-Doped TiO2 Film on Different Substrates and Its Application in Degrading Dyeing Water

TiO₂ and Fe-doped TiO₂ thin films were prepared on the substrates (glass plates and glass microballs) after dipped in colloid and calcined at 500°C. The films have been characterized by UV-absorption, x-ray diffraction and atomic force microscopy (AFM). The investigated Fe-doped TiO₂ (A nominal 10 wt% Fe₂O₃ was impregnated) thin films were obtained by sol-gel method. The characterization results suggest that the calcined thin films primarily consist of TiO₂ anatase. And the light absorption curve of the TiO₂ films modified with Fe showed that red shift had happened by the dope of Fe. TiO₂/beads as photocatalyst were used to degrade the simulated dyeing water which contains reactive deep-blue dye (K-R). Through the degradation experiment, we found that the dope of Fe promoted the photocatalytic activities. The results showed that the dyeing water can be decomposed more effectively by the photocatalytic oxidation of Fe/TiO₂ film on glass micro-balls than glass plates.     

Photocatalytic Activity of Nanocomposites of ZnO and Multi-Walled Carbon Nanotubes for Dye Degradation

Nanocomposites of ZnO and multi-walled carbon nanotubes (MWNTs) were prepared via electrostatic interaction and in situ hydrothermal synthesis approaches. The ZnO/MWNTs nanocomposites display relatively higher photocatalytic activity than ZnO nanoparticles for the degradation of Rhodamine B. Therein, MWNTs, acting as a photogenerated electron acceptor, retard the recombination of photoinduced electron and hole. The experimental results show that the photocatalytic activity of the ZnO/MWNTs nanocomposites strongly depends on the synthetic route, which is probably due to the difference of surface states resulted from the different preparation processes.     

卤氧化铋复合物光催化剂

利用半导体光催化降解有机污染物与分解水制氢对于解决能源短缺与环境污染这一世界性难题具有重要意义,引起了人们的重视.传统的光催化剂TiO2存在可见光利用率低与光生载流子的复合率高等问题[1-3],因此寻找新型高效光催化剂的工作迫     

SiO2/TiO2-xCx/C的制备、表征及其吸附和可见光催化性能

以SiO2为成核中心,钛酸四丁酯为钛源,分别以多羟基化合物乙二醇、丙三醇、葡萄糖和聚乙烯醇为联接剂,采用水解沉淀法制备了碳掺杂和包覆的多孔SiO2/TiO2-xCx/C可见光响应型光催化剂。采用X-射线衍射(XRD)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)、傅里叶变换-红外光谱(FTIR)、比表面积(BET)和紫外-可见(UV-Vis)漫反射光谱对样品进行表征。对不同结构样品的形成机理进行了分析。以次甲基蓝(MB)溶液为模拟废水,对样品的吸附性能和可见光催化性能进行了评价。结果表明,多羟基化合物对材料的结构和性能有重要影响。碳的掺杂和包覆使材料的吸收光谱包含了整个可见光区,而多孔结构使材料的吸附性能得到提高。以聚乙烯醇为原料所得样品吸附性能最好,30 min内吸附率达到70%;而以丙三醇为原料所得样品具有最好的可见光催化性能,40 min内次甲基蓝的降解率达到95%。     

有机杂化锑基主族异金属硫属化物的研究进展

本文综述了有机杂化锑基主族异金属硫属化物的研究进展,对它们的结构和异金属次级结构基元进行了描述、归类和总结;探讨了有机组分分别作为结构导向剂和配体两种角色所起到的不同作用;介绍了这类化合物在离子交换、光催化性能方面的研究;展望了该体系的发展趋势。     

有机杂化锑基主族异金属硫属化物的研究进展

本文综述了有机杂化锑基主族异金属硫属化物的研究进展, 对它们的结构和异金属次级结构基元进行了描述、归类和总结;探讨了有机组分分别作为结构导向剂和配体两种角色所起到的不同作用;介绍了这类化合物在离子交换、光催化性能方面的研究;展望了该体系的发展趋势。     

Metal-facilitated Photocatalytic Nanohybrids: Rational Design and Promising Environmental Applications

As a promising technique to potentially address the energy crisis and environmental issues, photocatalysis has been reported widely to exhibit various outstanding behaviors in production of new fuels/chemicals and treatment of contaminants. The photocatalytic performance is extremely dependent on the used photocatalysts, so that the design and preparation of efficient photocatalysts are critically important for significantly improving the photocatalytic activity. Among various strategies, the hybridization of metal with semiconductors has recently been attracting more and more research interest owing to their expended spectral absorption, promoted transferring rate of charge carriers and Plasmon-enhanced effect. In this minireview, the metal-facilitated hybrid photocatalysts are overviewed comprehensively to first reveal unique functions of metals in improvement of photoactivity and summarize the emerging metal-involved hybrid systems. Subsequently, the synthetic methods towards hybrid photocatalysts are introduced and their practical applications are emphasized in environmental remediation including degradation of organic pollutants, conversion of harmful gases, treatment of heavy metal ions and sterilization of bacteria. At the end, the challenges for industrializing these hybrid photocatalysts are discussed carefully and future development is suggested rationally.     

碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g?C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差。我们采用简单的一步热共聚法,以尿素和2,4,6?三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS?x,x mg代表掺入TAPD的质量)。X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(XPS)等测试结果表明,来自TAPD的嘧啶环成功引入g?C3N4共轭体系中,使所得的CNNS?x具有较窄的带隙,较快的光生载流子迁移速率,从而提高其对可见光的吸收效率和光生载流子的分离效率。得益于此,CNNS?x在可见光照射下表现出较好的光解水产氢活性。特别是CNNS?30具有最佳光解水性能,其产氢速率可达57.6μmol·h-1,是g?C3N4纳米片(CNNS)的4倍。