碳自掺杂石墨相氮化碳纳米片的制备及其在可见光照射下的光解水产氢性能

石墨相氮化碳(g-C3N4)由于具有对可见光吸收范围较窄和光生载流子分离效率低等缺陷,其光解水产氢活性较差.我们采用简单的一步热共聚法,以尿素和2,4,6-三氨基嘧啶(TAPD)混合物为前驱物,制备碳自掺杂纳米片(CNNS-x,xmg代表掺入TAPD的质量).X射线衍射(XRD)、元素分析(EA)和X射线光电子能谱(X...     

Bimetallic TiO2 Nanoparticles for Lignin-Based Model Compounds Valorization by Integrating an Optocatalytic Flow-Microreactor

The challenge of improving the activity of TiO₂ by modifying it with metals and using it for targeted applications in microreactor environments is an active area of research. Recently, microreactors have emerged as successful candidates for many photocatalytic reactions, especially for the selective oxidation process. The current work introduces ultrasound-assisted catalyst deposition on the inner walls of a perfluoro-alkoxy alkane (PFA) microtube under mild conditions. We report Cu-Au/TiO₂ and Fe-Au/TiO₂ nanoparticles synthesized using the sol–gel method. The obtained photocatalysts were thoroughly characterized by UV–Vis diffuse-reflectance spectroscopy (DRS), high-resolution scanning electron microscopy (HR-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and N₂ physisorption. The photocatalytic activity under UV (375 nm) and visible light (515 nm) was estimated by the oxidation of lignin-based model aromatic alcohols in batch and fluoropolymer-based flow systems. The bimetallic catalyst exhibited improved photocatalytic selective oxidation. Herein, four aromatic alcohols were individually investigated and compared. In our experiments, the alcohols containing hydroxy and methoxy groups (coniferyl and vanillin alcohol) showed high conversion (93% and 52%, respectively) with 8% and 17% selectivity towards their respective aldehydes, with the formation of other side products. The results offer an insight into ligand-to-metal charge transfer (LMCT) complex formation, which was found to be the main reason for the activity of synthesized catalysts under visible light.     

低温水热法制备硅胶负载型二氧化钛催化剂

TiO2作为一种优良的光催化材料,能够降解有机物,起到抗菌防污的作用,其在工业上的潜在应用已吸引众多研究者的普遍关注和深入研究[1-3]。为了进一步提高它的光催化活性,研究者试图运用各种方法和技术对纯TiO2进行改进。负载[3]是其中常用方法之一。对于无负载的二氧化钛,由于本     

离子对UIO-66-2OH光催化性能的影响

实际废水中存在的离子会对有机污染物的光催化降解产生影响.以ZrCl4和2,5-二羟基对苯二甲酸为原料,通过水热合成法成功制备了金属有机骨架材料UIO-66-2OH.通过红外(IR)、X射线粉末衍射(XRD)、X射线光电子能谱(XPS)和扫描电子显微镜(SEM)对UIO-66-2OH的结构进行表征.利用水中常见的金属阳离...     

载体对负载型TiO2催化剂光催化性能的影响

 以活性碳（AC）和镁铝尖晶石（MA）为载体，采用真空吸附水解法制备了负载型光催化剂TiO2／AC和TiO2／MA，并采用TiO2溶胶负载法制备了活性碳负载催化剂TiO2（C）／AC．以氯仿为探针分子研究了其在催化剂上的吸附及光催化降解反应性能．结果表明，催化剂的制备方法、TiO2负载量与载体的吸附性能对光催化活性有明显的影响．通过优化制备条件，TiO2／AC催化剂的催化活性可提高到纳米TiO2的2．5倍．氯仿在AC上的饱和吸附量较高，但吸附强度较弱；在纳米TiO2上的吸附情况则正好相反．氯仿在AC和TiO2上吸附性质的差异有利于吸附在TiO2／AC上的氯仿分子从活性碳载体向TiO2光催化活性中心迁移．镁铝尖晶石载体对光催化反应没有明显的促进作用，与其基本上不吸附氯仿分子有关．与TiO2胶体负载法相比，真空吸附水解法是一种较好的负载型TiO2光催化剂制备方法．     

纳米尺度分散的TiO2光催化降解甲醛的机理

纳米TiO2具有小尺寸效应,表面效应和宏观量子隧道效应等[1],广泛用于防水处理、空气净化、抗菌防霉等方面。本文对其能带结构及其消除甲醛的性能及机理进行分析。1　纳米TiO2光催化剂1 1　制备与表征以四氯化钛为主要原料,氨水、醇类化合物、盐酸等为主要反应助剂,采用亚稳态氯化法制备工艺,用相应的溶胶反应形成溶胶液体,低于100℃加热该液体,除去多余的水分,得到溶胶-凝胶体。过滤所得溶胶-凝胶体,并用蒸馏水反复洗涤数次,使其pH呈中性。将洗涤后的溶胶-凝胶体进行真空干燥,得到白色微粉,1000℃高温煅烧,将煅烧后得到的纳米TiO2基…     

三维有序结构In掺杂TiO_2薄膜的可见光催化活性

采用自组装生长聚苯乙烯胶体模板和溶胶-凝胶法,制备出三维(3D)有序结构In掺杂TiO2(IO-TiO2-In)薄膜可见光催化剂.光催化实验证明,IO-TiO2-In薄膜降解甲醛的可见光活性是TiO2和三维有序结构TiO2(IOTiO2)薄膜的5倍.利用X射线电子衍射(XRD)谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射吸收光谱确定了催化剂的晶相结构、表面微结构和能带结构.结果表明,IO-TiO2-In薄膜具有锐钛矿型三维有序结构,与TiO2相比,增加了比表面积,提高光的利用率;掺入的In离子在薄膜表面形成In2O3和O-In-Clx(x=1,2)物种,既增强可见光的吸收,又有效地促进了光生载流子的分离,提高了光生载流子在固/气界面参加光催化反应的利用率,使催化剂的可见光催化活性显著提高.     

基于一维[H_2Mo_4O_(14)]_n~(2n-)链和双吡啶双酰胺配体的三维锌配合物的合成、结构与性能

选择柔性的双吡啶双酰胺配体N,N'-双(3-吡啶甲酰胺基)-1,2-乙烷(3-bpye)、钼酸铵和氯化锌在水热条件下自组装制备了一个基于一维[H_2Mo_4O_(14)]_n~(2n-)链的三维锌配合物[Zn(3-bpye)(H_2Mo_4O_(14))(H_2O)_2],并通过元素分析、红外光谱、热重分析等技术手段研究了配合物的结构,并利用X射线单晶衍射分析进行了晶体结构表征。结构解析揭示标题配合物是三斜晶系,P-1空间群,晶胞参数a=0.61310(3)nm,b=1.04750(6)nm,c=1.06540(6)nm,α=78.5540(10)°,β=77.5350(10)°,γ=89.9050(10)°,V=0.65420(6)nm~3,M_r=981.47,D_c=2.491 g/cm~3,Z=1,F(000)=468,R_1=0.0290,ωR_2=0.1068。标题配合物中,金属锌离子连接一维[H_2Mo_4O_(14)]_n~(2n-)链形成一种二维无机双金属层[Zn(H_2Mo_4O_(14))]_n,相邻的层间又通过双齿配体3-bpye连接形成三维CdSO_4拓扑的骨架结构。配合物表现出强的荧光发射特性,而且其在紫外光照下对亚甲基蓝和罗丹明B均有明显的催化降解活性。     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

阳离子表面活性剂对有机颜料艳红6B光催化降解的影响

 研究了阳离子表面活性剂四丁基溴化铵(TBAB)和十六烷基三甲基溴化铵(CTAB)对TiO2光催化降解艳红6B(R6B)的影响,讨论了表面活性剂与R6B的相互作用,给出了二者与TiO2之间的吸附模型. 结果表明,相同条件下,阳离子表面活性剂的加入可增加R6B的降解褪色速率,但表面活性剂自身并不降解. 在强酸(pH=3.00)和强碱(pH=12.60)条件下,R6B的降解褪色速率较快. pH值相同时,体系中TBAB的浓度变化对R6B降解褪色速率的影响不大,而CTAB浓度的变化对R6B降解褪色速率的影响较为明显,CTAB浓度为0.4 g/L时R6B的降解褪色速率最快.