Photo‐Oxidation of sPP/Organoclay Nanocomposites

Photo‐oxidation of syndiotactic polypropylene–sPP/organoclay nanocomposites was performed. Nanocomposites were prepared in situ by melt compounding of sPP, compatibilizer (iPP grafted with maleic anhydride–iPP‐g‐MAN) and organoclay filler ME C18 (modified with octadecyl ammonium chains in intergaleries of layered silicate, of which silicate layers (about 1 nm thin) were exfoliated). The influence of ME C18 nanoparticles alone (in content region 1 to 15 wt%) and together with compatibilizer iPP‐g‐MAN on the photostability of the sPP nanocomposite was studied. It was found that the silicate ME C18 nanoparticles alone catalyze the photooxidation and shorten the induction period of photo‐oxidation to one fourth (at the content of 5 wt% of ME C18) in comparison with unfilled sPP) and the presence of compatibilizer supports the photo‐oxidation of sPP nanocomposite. The ME C18 nanoparticles decrease the efficiency of UV stabilizers. The rate of photo‐oxidation of sPP/clay nanocomposite after the induction period is significantly higher than unfilled sPP. The mechanism of photo‐oxidation is discussed.     

Temperature/Light Dual‐Responsive Inclusion Complexes of α‐Cyclodextrins and Azobenzene‐Containing Polymers

Three kinds of photoresponsive copolymers with azobenzene side chains were synthesized by radical polymerization of N‐4‐phenylazophenylacrylamide (PAPA) with N‐isopropylacrylamide (NIPAM), N,N‐diethylacrylamide (DEAM) or N,N‐dimethylacrylamide (DMAM) respectively. Their structures were characterized by FT‐IR, ¹H‐NMR and UV/Vis spectroscopy. Their reversible photoresponses were studied with or without α‐cyclodextrin (α‐CD), which showed that both the copolymers and their inclusion complexes with α‐CD underwent rapid photoisomerization. The lower critical solution temperature (LCST) of the copolymers and their inclusion complexes with α‐CD were investigated by cloud point measurement, which showed that the LCST of three kinds of copolymers increased largely after adding α‐CD. After UV irradiation on the solutions of copolymers and their inclusion complexes, the LCST of the copolymers increased slightly with the absence of α‐CD, while decreased largely with the presence of α‐CD. Furthermore, the LCST reverted to its originality after visible light irradiation. This change of LCST could be reversibly controlled by UV and visible light irradiation alternately. In particular, in the copolymer of PAPA and DMAM, the reversible water solubility of the inclusion complexes could be triggered by alternating UV and visible light irradiation.     

Continuous Detection of pH‐responsive Drug Delivery System in Cells in situ by Confocal Laser Scanning Microscopy

Mesoporous silica nanoparticles (MSN) were coated by pH‐responsive polymer chitosan‐poly (methacrylic acid) (CS‐PMAA). This nano drug delivery system showed good application prospects and the polymer‐coated microspheres were promising site‐specific anticancer drug delivery carriers in biomedical field. A continuous detection of pH‐responsive drug delivery system in cells in situ, utilizing MSN/CS‐PMAA composite microspheres, was proposed. Two kinds of different cell lines, tumor cell line (Hela) and normal somatic cells (293T), were used to investigate the behaviours of the drug loaded system in the cells. Conclusions could be drawn from the fluorescent images obtained by confocal laser scanning microscopy (CLSM), modified drug‐loaded microspheres (MSN/CS‐PMAA) were ingested into cells more easily, the uptake of DOX@FITC‐MSN/CS‐PMAA by HeLa/293T cells were performed at pH 7.4/pH 6.8, DOX was released during the ingestion process, fluorescence intensity decreased with time because of efflux transport and photo‐bleaching. Fluoresence detection by flow cytometry was performed as comparison. The continuous fluorescent observation in situ could be widely used in the pH‐responsive releasing process of drug delivery system in the cells.     

A novel supramolecular graft copolymer via cucurbit[8]uril-based complexation and its self-assembly

A novel supramolecular graft copolymer（SGP） composed of viologen-containing copolymer（P（DMA-co-diEV）） as the main chain and Np ended PNIPAM（Np-PN1PAm） as the grafts is prepared（DMA:N,N- dimethylacryamide,diEV:ethylviologen dimer,Np:naphthalene,PNIPAM:poly（N-isopropylacrylamide））. The grafting is based on the triple complexation among a host of cucurbit[8]uril（CB[8]）and two guests of diEV and Np,which is characterized by UV-vis spectra and ITC.Temperature sensitive property of PNIPAm moiety allows SGP to self-assemble into non-covalently connected micelle（NCCM） at high temperature. The micelles are sensitive to reducing agents,for example Na₂S₂O₃,which breaks the current inclusion complex pair and induces aggregation.     

Polypeptide/Doxorubicin Hydrochloride Polymersomes Prepared Through Organic Solvent‐free Technique as a Smart Drug Delivery Platform

Rapid and efficient side‐chain functionalization of polypeptide with neighboring carboxylgroups is achieved via the combination of ring‐opening polymerization and subsequent thiol‐yne click chemistry. The spontaneous formation of polymersomes with uniform size is found to occur in aqueous medium via electrostatic interaction between the anionic polypeptide and cationic doxorubicin hydrochloride (DOX·HCl). The polymersomes are taken up by A549 cells via endocytosis, with a slightly lower cytotoxicity compared with free DOX ·HCl. Moreover, the drug‐loaded polymersomes exhibit the enhanced therapeutic efficacy, increase apoptosis in tumor tissues, and reduce systemic toxicity in nude mice bearing A549 lung cancer xenograft, in comparison with free DOX ·HCl.     

Synthesis of Some Additives and Study Effect of Gas Oil Composition on Flow Properties

Nine additives were prepared by esterification of dibasic acid (succinic, adipic, sebacic acid) and polyethylene glycol (Mol.wt.=600, 1000, 4000). These additives were characterized by infrared spectral analysis, average molecular weight and polydispersity index. Their influence on the depression of pour point for two type of paraffin gas oils (G1 and G2) were investigated, blends of paraffin gas oils G1 and G2 by different ratio, when their untreated and treated by additives were evaluated as pour point depressant in comparison with the original paraffin gas oils G1 and G2.

The effect of additive type and gas oil composition on wax crystal modification were studied using the photo micrographic analysis. Diethoxylate (eo=182) sebacate with blend gas oil No. 3 has achieved the best performance as pour point depressant. The photo micrographic analysis showed that, the wax morphology was greatly modified to fine dispersed crystals of compact size. A correlation between the pour point depression and the extent of wax modification was detected.     

Synthesis and properties of novel 1,1‐difluoropropoxy‐linked liquid crystalline compounds of negative dielectric anisotropy

A series of liquid crystalline compounds having the difluoropropyleneoxy moiety (–OCF₂C₂H₄–) as a linking group has been synthesized. The physical properties, i.e. dielectric anisotropy, birefringence, viscosity and phase transition temperatures, have been measured. This novel class of compounds shows a larger negative dielectric anisotropy than the corresponding compounds having a propyleneoxy (–OC₃H₆–) linking group. Their dielectric properties may be explained by the combined effect of fluorine atoms with large electron negativities and the electron donating feature of an oxygen atom substituted on the same carbon atom. The semi‐empirical quantum calculation method (AM1) also confirmed this dielectric behaviour of the difluoropropyleneoxy linkage group.     

Integrated Hollow Mesoporous Silica Nanoparticles for Target Drug/siRNA Co‐Delivery

A hollow mesoporous silica nanoparticle (HMSNP) based drug/siRNA co‐delivery system was designed and fabricated, aiming at overcoming multidrug resistance (MDR) in cancer cells for targeted cancer therapy. The as‐prepared HMSNPs have perpendicular nanochannels connecting to the internal hollow cores, thereby facilitating drug loading and release. The extra volume of the hollow core enhances the drug loading capacity by two folds as compared with conventional mesoporous silica nanoparticles (MSNPs). Folic acid conjugated polyethyleneimine (PEI‐FA) was coated on the HMSNP surfaces under neutral conditions through electrostatic interactions between the partially charged amino groups of PEI‐FA and the phosphate groups on the HMSNP surfaces, blocking the mesopores and preventing the loaded drugs from leakage. Folic acid acts as the targeting ligand that enables the co‐delivery system to selectively bind with and enter into the target cancer cells. PEI‐FA‐coated HMSNPs show enhanced siRNA binding capability on account of electrostatic interactions between the amino groups of PEI‐FA and siRNA, as compared with that of MSNPs. The electrostatic interactions provide the feasibility of pH‐controlled release. In vitro pH‐responsive drug/siRNA co‐delivery experiments were conducted on HeLa cell lines with high folic acid receptor expression and MCF‐7 cell lines with low folic acid receptor expression for comparison, showing effective target delivery to the HeLa cells through folic acid receptor meditated cellular endocytosis. The pH‐responsive intracellular drug/siRNA release greatly minimizes the prerelease and possible side effects of the delivery system. By simultaneously delivering both doxorubicin (Dox) and siRNA against the Bcl‐2 protein into the HeLa cells, the expression of the anti‐apoptotic protein Bcl‐2 was successfully suppressed, leading to an enhanced therapeutic efficacy. Thus, the present multifunctional nanoparticles show promising potentials for controlled and targeted drug and gene co‐delivery in cancer treatment.