A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

Assessment of Chemical Composition and Anti-Penicillium Activity of Vapours of Essential Oils from Abies Alba and Two Melaleuca Species in Food Model Systems

The possibilities of the practical utilization of essential oils (EOs) from various plant species in the food industry have attracted the attention of the scientific community. Following our previous studies, the antifungal activities of three further commercial EOs, Melaleuca armillaris subsp. armillaris (rosalina; REO), Melaleuca quinquenervia (niaouli; NEO), and Abies alba (fir; FEO), were evaluated in the present research in respect to their chemical profiles, over four different concentrations, 62.5 μL/L, 125 μL/L, 250 μL/L, and 500 μL/L. The findings revealed that the major compounds of REO, NEO, and FEO were linalool (47.5%), 1,8-cineole (40.8%), and α-pinene (25.2%), respectively. In vitro antifungal determinations showed that the inhibition zones of a Penicillium spp. mycelial growth ranged from no inhibitory effectiveness (00.00 ± 00.00 mm) to 16.00 ± 1.00 mm, indicating a very strong antifungal activity which was detected against P. citrinum after the highest REO concentration exposure. Furthermore, the in situ antifungal efficacy of all EOs investigated was shown to be dose-dependent. In this sense, we have found that the highest concentration (500 µL/L) of REO, NEO, and FEO significantly reduced (p < 0.05) the growth of all Penicillium strains inoculated on the bread, carrot, and potato models. These results indicate that the investigated EOs may be promising innovative agents in order to extend the shelf life of different types of food products, such as bread, carrot and potato.     

Numerical Study on an RBF-FD Tangent Plane Based Method for Convection–Diffusion Equations on Anisotropic Evolving Surfaces

In this paper, we present a fully Lagrangian method based on the radial basis function (RBF) finite difference (FD) method for solving convection–diffusion partial differential equations (PDEs) on evolving surfaces. Surface differential operators are discretized by the tangent plane approach using Gaussian RBFs augmented with two-dimensional (2D) polynomials. The main advantage of our method is the simplicity of calculating differentiation weights. Additionally, we couple the method with anisotropic RBFs (ARBFs) to obtain more accurate numerical solutions for the anisotropic growth of surfaces. In the ARBF interpolation, the Euclidean distance is replaced with a suitable metric that matches the anisotropic surface geometry. Therefore, it will lead to a good result on the aspects of stability and accuracy of the RBF-FD method for this type of problem. The performance of this method is shown for various convection–diffusion equations on evolving surfaces, which include the anisotropic growth of surfaces and growth coupled with the solutions of PDEs.     

金红石TiO_2中本征缺陷扩散性质的第一性原理计算

基于密度泛函理论的爬坡弹性带方法,对金红石相二氧化钛晶体中钛间隙、钛空位、氧间隙、氧空位4种本征缺陷的扩散特征进行了研究.对比4种本征缺陷在晶格内部沿不同扩散路径的过渡态势垒后发现,缺陷扩散过程呈现出明显的各向异性.其中,钛间隙和氧间隙沿[001]方向具有最小的扩散势垒路径,激活能分别为0.505 eV和0.859 eV;氧空位和钛空位的势垒最小的扩散路径分别沿[110]方向和[111]方向,激活能分别为0.735 eV和2.375 eV.     

原子表面扩散的对称破缺对二维岛形成的控制

文章阐述了当CO吸附改变时Pt/Pt(111)同质外延单层岛的形状的微观选择机制,即岛的取向由沉积原子的边-角扩散运动的不对称性惟一决定.对没有CO介入的理想真空生长情况,衬底温度不能改变三角形岛的取向.CO的吸附反转了边-角扩散运动的不对称性,从而使岛的取向发生变化.     

Use Of Diffusion Controlled Preconcentration Systems With Chemically Immobilized Coatings For The Determination Of Atmospheric Nitric Acid

Abstract

A new coating procedure for different diffusion controlled preconcentration methods (tubular denuder, annular denuder, diffusion screen) is described for the determination of nitric acid in air. In this study, a silanization reaction is applied to obtain a chemically fixed coating with an end placed functional NH₂-group, which can be used as a sink to collect acidic compounds from air. This coating must be carried out only once and can be used for a long time. The denuders, coated with this procedures, were compared with conventionally coated NaF denuders.     

Direct observations of the leaching of a simulated nuclear waste glass in a radiation environment

The durability of the media proposed for the containment of commercial nuclear waste will be affected not only by the differences in groundwater composition that they might encounter but also by the changes that their own irradiation fields will make to these solutions. Experimental results that question the ability of current leaching experiments to predict the stability of nuclear waste composites are presented.     

NIEDERKOORDINIERTE PHOSPHORVERBINDUNGEN, 701 1-METALLA-2,5-DIPHOSPHA PENTA-1,3-DIENE DURCH 1,4-ADDITION VON METALLCARBONYLCYCLOPENTADIENYLHYDRIDEN AN 1,4-DIPHOSPHABUTA-1,3-DIEN

Abstract

Reactions of carbonyl cyclopentadienyl hydrides from molybdenum and tungsten with 1,4-diphosphabuta-1,3-diene yield metalla-diphospha-pentadiene with a metal-phosphorus-double bond.

Metalla-diphosphapentadiene mit einer Metall-Phosphor-Doppelbindung werden durch Umsetzung von Carbonylcyclopentadienylhydriden des Molybdäns und Wolframs mit einem 1,4-Diphospha-buta-1,3-dien erhalten.     

Response to the comments by J.H. Evans on ‘On the onset of void ordering in metals under neutron or heavy-ion irradiation’

Evans's comments are related only loosely to the main body of our paper, which is devoted to the onset of void ordering: his Monte Carlo simulations of this early stage of ordering are in a qualitative agreement with our results. They question, however, the basic mechanisms of damage accumulation revealed by a number of scientists using various techniques over the years. Here we argue that his views are erroneous due to overlooking some essential features of one-dimensional defect transport.