Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

ELECTRON GUN FOR LARGE ORBIT GYROTRON (LOG) WITH DECREASED INFLUENCE OF CATHODE PLASMA ON ELECTRON BEAM PROPERTIES

High power Large Orbit Gyrotron (LOG) [1] is now under development at FIR FU. First version of this device was recently manufactured and then assembled with power supply ETIGO-IV [2]. Results of preliminary tests of electron-optic system are presented. The conditions when stableflat form of current pulse realized are discussed. Analytical estimations of cathode-anode distance to achieve small influence of cathode plasma during high voltage (HV) pulse are performed. Two new electron gun versions with decreased influence of the cathode plasma on its impedance and pulse form are suggested and optimized. New optimal magnetic field distributions are found. First gun has quiasi-flat cathode configuration near the anode diaphragm and provides operating current about 60 A. Second one uses blade cathode with operating current about 30 A. Beam quality for both guns is suitable for LOG operation.     

电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.     

聚合物微腔的研制及其特性分析

采用ＢＭＰＰＶ：ＰＶＫ的混合物作国源介质，将其按一定比例溶于氯仿中，并旋涂在具有９９．５％的反射率的ＤＢＲ上，其上蒸发３００ｎｍ的银膜，形成了面发射型微腔结构，其中ＤＢＲ在入射腔面，银膜为反射腔面，在激发波长３３７．１ｎｍ，频率２０Ｈｚ脉宽１０ｎｓ的氮分子激光器泵浦下，光谱明显等窄化，出现４６０ｎｍ和５３０ｎｍ两个比较强的发光峰，主峰国４６０ｎｍ半宽度为７ｎｍ。     

电感耦合等离子体原子发射光谱分析中不同电离电位元素基体效应的比较研究

选择不同电离电位的基体元素K、Na、La、Y和Mg,比较研究了它们对分析元素谱线强度的影响,其影响程度与谱线激发电位及基体元素电离电位有定量的相关关系。碱金属基体(K、Na)和非碱金属基体(La、Y和Mg)对分析元素检出限、背景强度及其相对标准偏差的影响显著不同,后者的记忆效应也大于前者。La的电离电位与Na相差不大。但其基体效应与Y相似,表明墓体效应与基体元素的化学性质有关。     

聚（2,5—二甲氧基对苯乙炔）的可溶性前聚物合成及表征

研究了合成聚（２，４－二甲氧基对苯乙炔）的有机可溶性前聚物的反应条件与单体转化率和前聚物产率的关系。实验结果表明：ＮａＯＨ是聚合反应的有效引发剂，适宜的反应条件为：单体与ＮａＯＨ摩尔比为１：１，单体浓度０．０５－０．２ｍｏｌ／Ｌ，聚合时间２ｈ，温度低５℃，正己烷、石油醚作为有机提取剂可有效提高前聚物产率。用ＩＲ、ＵＶ－Ｖｉｓ＇＾ＨＮＭＲ，ＴＧＡ和 ＤＳＣ对前聚物进行了表征。     

氢化物发生电感耦合等离子体原子发射光谱同时测定纯铜中氢化物和非氢化物形成元素

用新型氢化物发生喇叭口Ⅱ型同心雾化器替代Meinhard同心雾化器，溶液雾化为气溶胶和氢化物发生反应生成氢化物气体就可以在雾化系统中同时进行，选用L-巯基丙氨酸(L-cysteine)和硫脲(thiourea)作为基体铜的掩蔽剂，无需分离基体铜，实现了电感耦合等离子体原子发射光谱(ICP-AES)同时测定纯铜样品中氢化物和非氢化物形成元素的目的。研究了酸度、NaBH4的浓度、载气流速及清洗时间对氢化物形成元素的影响，考察了铜基体对氢化物形成元素的化学干扰情况。用本方法测定了纯铜标准样品(NIST SRM400)，结果令人满意。在1000mg/L纯铜样品溶液中，其氢化物形成元素As、Bi、Sb、Sn、Se和Te的检出限分别为0．08、0．15、0．10、0．17、0．21和0．23μg／L。     

8-羟基喹啉-5-磺酸纤维微柱分离富集电感耦合等离子体原子发射光谱法同时测定多种痕量元素

本文合成了8-羟基喹啉-5-磺酸纤维滤纸片,以此做为微柱填充物同时富集了10种痕量元素,并分离了样品中的高盐组分.本方法可使痕量组分的分离与富集同步进行,因而特别适用于原子光谱测定前样品的预处理.