Phase Behavior of Diglycerol Monomyristate in Different Nonpolar Organic Solvent Systems

We have investigated the phase behavior of diglycerol monomyristate (DGM) in a variety of organic solvents over a wide range of temperatures and compositions. At lower temperature, there exists a surfactant solid, which solubilize different amounts of oils depending on the oil nature. The melting temperature of the solid phase is virtually constant in a wide range of composition. In all the systems, a lamellar liquid crystal (L_α) is formed in surfactant‐rich regions at intermediate temperatures between the solid‐melt and isotropic two‐ or single‐phase regions. In the dilute regions reverse vesicles are formed in the L_α+O regions mainly in the case of linear hydrocarbon type oils. In the aromatic and cyclic aliphatic oils, there are isotropic solutions at 25°C. However, there is dispersion of α‐solid in the case of liner hydrocarbon oils. Two liquid‐phase regions above the L_α phase are observed in the case of tetradecane and hexadecane. In the shorter chain oil systems, such as octane and decane, no two liquid‐phase appear above L_α region. That is the two liquid‐phase region is largely dependent on the chain length of the oils, and becomes wider in longer hydrocarbon oil.     

Virtual isotropic‐nematic transitions in alkyl cyanobiphenyls

Pretransitional fluctuations in the isotropic phase of liquid crystalline and non‐liquid crystalline alkyl cyanobiphenyls have been investigated using light scattering and magnetic birefringence measurements. We find evidence for a virtual isotropic‐nematic phase transition in short‐chain alkyl cyanobiphenyls with no observable nematic phase. The measured temperature dependence of fluctuations is well‐described by mean‐field theory. Virtual phase transition temperatures extrapolated from separate light scattering and magnetic birefringence experiments are in good agreement. Landau–de Gennes model parameters for the compounds investigated are calculated from the experimental results.     

Study of the electrocaloric effect in ferroelectric liquid crystals

ABSTRACT

Electrocaloric effect (ECE) in two ferroelectric liquid crystalline (FLC) materials has been evaluated by mean of two indirect characterization methods: the photopyroelectric (PPE) technique and the polarization current reversal one. The obtained results show a good correspondence of the adiabatic temperature change associated with the ECE evaluated from both methods. This validates the possibility to use the PPE technique to investigate the ECE in FLCs. This study also demonstrates that FLCs can be used as electrocaloric material. More particularly, it shows that as for their solid homologous, liquid crystals displays more pronounced ECE in the vicinity of a first order transition than that measured near to second-order one.     

Synthesis of novel nematic liquid crystals containing 3,3'-dimethyl-2,2'-bipyridyl

Liquid-crystalline 3,3′-dimethyl-2,2′-bipyridyl derivatives with long 4-(alkoxyphenyl)ethynyl (-C≡C-C₆H₄-OR) groups in the 5,5′-positions were synthesized by palladium-catalysed crosscoupling reactions. The compounds exhibit exclusively nematic behaviour; for example, the hexyl derivative showed a nematic phase over the temperature range 145.2–205.0°C. On increasing the length of the terminal chain, the transition temperatures were lowered; for example, the hexadecyl derivative was nematic in the range 117.0–126.8°C.     

Molecular organization in two-dimensional films of liquid crystalline mixtures III. Langmuir films of binary mixtures of liquid crystal materials with terminal CN o r NCS group

Langmuir films of binary mixtures of the following liquid crystal materials: 4-octyl-4′-cyanobiphenyl (8CB) or 4-pentyl-4″-cyano-p-terphenyl (5CT) with 4-(trans-4'-octylcyclohexyl)isothiocyanatobenzene (8CHBT), trans-4-octyl(4′-cyanophenyl)cyclohexane (8PCH) or 4-octyl4′-isothiocyanatobiphenyl (8BT) were investigated. Surface pressure-mean molecular area isotherms were recorded at various mixture compositions. It was found that only liquid crystal materials for which the molecules have a terminal -CN group are able to form a stable monolayer at the air-water interface. Moreover, information about the miscibility or the phase separation of the two components in the mixures was obtained by using the excess area criterion and surface phase rules.     

The effect of ethanol on the phase behaviour and micro-rheology of liquid crystals

The effect of ethanol on the phase behaviour and micro-rheology of lyotropic liquid crystals (LC) has been studied using a binary mixture of monoglyceride (MG) and aqueous ethanol. The phase behaviour study reveals the structural modulation of surfactant aggregates with increasing ethanol concentration, namely a bicontinuous cubic phase (Ia3d) transitions to the lamellar phase (L_α), at a fixed MG concentration. This behaviour is explained by considering the critical packing parameter (CPP) of the surfactant molecule. Because ethanol dehydrates the surfactant head group (a _s), the CPP values increase (decreasing a _s) and thus the formation of larger CPP aggregates is favoured (i.e., the Ia3d–L_α transition occurs). Cross-polarised images and X-ray scattering data support this conclusion. The structural modulation of the LC has further been investigated using a diffusing wave spectroscopy technique. The correlation and relaxation times, determined from the intersection point at short and long time scales of the mean square displacement (MSD), decrease with increasing concentrations of ethanol, indicating structural modulation of the LC. The micro-viscoelastic moduli (G′ and G′′) derived from the Laplace transformation of the MSD decrease with increasing ethanol concentrations, due to the LC modulation. The thermal effects on the micro-rheology of the LC have also been studied.     

Phase‐Junction Electrocatalysts towards Enhanced Hydrogen Evolution Reaction in Alkaline Media

To ensure sustainable hydrogen production by water electrolysis, robust, earth‐abundant, and high‐efficient electrocatalysts are required. Constructing a hybrid system could lead to further improvement in electrocatalytic activity. Interface engineering in composite catalysts is thus critical to determine the performance, and the phase‐junction interface should improve the catalytic activity. Here, we show that nickel diphosphide phase junction (c‐NiP₂/m‐NiP₂) is an effective electrocatalyst for hydrogen production in alkaline media. The overpotential (at 10 mA cm^?2) for NiP₂‐650 (c/m) in alkaline media could be significantly reduced by 26 % and 96 % compared with c‐NiP₂ and m‐NiP₂, respectively. The enhancement of catalytic activity should be attributed to the strong water dissociation ability and the rearrangement of electrons around the phase junction, which markedly improved the Volmer step and benefited the reduction process of adsorbed protons.     

A novel imaging tool for hepatic portal system using phase contrast technique with hydrogen peroxide‐generated O2 gas

The objective of this study was to investigate the potential of hydrogen peroxide‐generated oxygen gas‐based phase contrast imaging (PCI) for visualizing mouse hepatic portal veins. The O₂ gas was made from the reaction between H₂O₂ and catalase. The gas production was imaged by PCI in real time. The H₂O₂ was injected into the enteric cavity of the lower sigmoid colon to produce O₂ in the submucosal venous plexus. The generated O₂ gas could be finally drained into hepatic portal veins. Absorption contrast imaging (ACI) and PCI of O₂‐filled portal veins were performed and compared. PCI offers high resolution and real‐time visualization of the O₂ gas production. Compared with O₂‐based ACI, O₂‐based PCI significantly enhanced the revealing of the portal vein in vivo. It is concluded that O₂‐based PCI is a novel and promising imaging modality for future studies of portal venous disorders in mice models.     

Synthesis,characterization and electrochemical performances of LiFePO4/graphene cathode material for high power lithium-ion batteries

LiFePO₄/graphene (LiFePO₄/G) cathode with exciting electrochemical performance was successfully synthesized by liquid phase method. LiFePO₄ nanoparticles wrapped with multi-layered grapheme can be fabricated in a short time. This method did not need external heating source. Heat generated by chemical reaction conduct the process and removed the solvent simultaneously. The LiFePO₄/G were analyzed by X-ray diffraction (XRD) analysis, scanning electron microscope (SEM), transmission electron microscopy (TEM), magnetic properties analysis and electrochemical performance tests. The LiFePO₄/G delivered a capacity of 160 mAh g⁻¹ at 0.1C and could tolerate various dis-charge currents with a capacity retention rate of 99.8%, 99.2%, 99.0%, 98.6%, 97.3% and 95.0% after stepwise under 5C, 10C, 15C, 20C, 25C and 30C, respectively.