Cooperative Effects in Catalytic Hydrogenation Regulated by both the Cation and Anion of an Ionic Liquid

The use of transition‐metal nanoparticles/ionic liquid (IL) as a thermoregulated and recyclable catalytic system for hydrogenation has been investigated under mild conditions. The functionalized ionic liquid was composed of poly(ethylene glycol)‐functionalized alkylimidazolium as the cation and tris(meta‐sulfonatophenyl)phosphine ([P(C₆H₄‐m‐SO₃)₃]^3?) as the anion. Ethyl acetate was chosen as the thermomorphic solvent to avoid the use of toxic organic solvents. Due to a cooperative effect regulated by both the cation and anion of the ionic liquid, the nanocatalysts displayed distinguished temperature‐dependent phase behavior and excellent catalytic activity and selectivity, coupled with high stability. In the hydrogenation of α,β‐unsaturated aldehydes, the ionic‐liquid‐stabilized palladium and rhodium nanoparticles exhibited higher selectivity for the hydrogenation of the C?C bonds than commercially available catalysts (Pd/C and Rh/C). We believe that the anion of the ionic liquid, [P(C₆H₄‐m‐SO₃)₃]^3?, plays a role in changing the surrounding electronic characteristics of the nanoparticles through its coordination capacity, whereas the poly(ethylene glycol)‐functionalized alkylimidazolium cation is responsible for the thermomorphic properties of the nanocatalyst in ethyl acetate. The present catalytic systems can be employed for the hydrogenation of a wide range of substrates bearing different functional groups. The catalysts could be easily separated from the products by thermoregulated phase separation and efficiently recycled ten times without significant changes in their catalytic activity.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。     

结晶高分子非晶区的结构及其动力学行为研究进展

非晶结构对结晶高分子材料结构和最终使用性能有非常重要的影响,但目前对半晶高分子中非晶结构的认识还不太清晰并且有待进一步完善.随着研究手段的发展,结晶高分子中非晶区结构及其动力学行为的研究受到越来越多的关注.本文简要概述了目前对结晶高分子中非晶相的研究进展,主要从结晶高分子中非晶区的结构﹑结晶高分子中非晶区的松弛行为﹑非晶相对结晶高分子性能的影响以及等温结晶过程中非晶相的结构演化这四个方面进行介绍,并对它们的研究现状进行了概述,同时指出了目前在这方面研究中存在的争议和问题.     

亚稳碘化汞(β-HgI2M)晶体生长与相变

采用溶液法,以α-HgI₂为原料,在DMSO和H₂O混合溶剂中生长了β-HgI₂^M晶体。通过XRD检测了晶体的结构特征,利用偏光显微镜研究了晶体生长的动态过程及β-HgI₂^M→α-HgI₂的相变过程。研究表明,生长的晶体为β-HgI₂^M,空间结构为Cmc2₁;晶体生长界面夹角为65.02°,与β-HgI₂^M单胞中(110)和(110)夹角(65.16°)吻合;β-HgI₂^M→α-HgI₂相变为结构重构的一级相变。     

Tighter uncertainty principles for periodic signals in terms of frequency

In this study, we propose some new uncertainty principles for periodic signals with sharper lower bounds than those in the existing ones. The improved lower bounds, in particular, are related to the frequency of the signal. Three examples are employed to demonstrate sharpness of the new uncertainty principles. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of estrogens in environmental water samples using 1,3‐dipentylimidazolium hexafluorophosphate ionic liquid as extraction solvent in dispersive liquid–liquid microextraction

In this work, the potential of a symmetric dialkyl‐substituted ionic liquid (IL), 1,3‐dipenthylimidazolium hexafluorophosphate ([PPIm][PF₆]), as extraction solvent in dispersive liquid–liquid microextraction (DLLME) has been studied for the analysis of a group of three natural (estriol, 17β‐estradiol, and 17α‐estradiol) and four synthetic (17α‐ethynylestradiol, diethylstibestrol, dienestrol, and hexestrol) estrogenic compounds as well as one mycotoxin with estrogenic activity (zearalenone) in different types of water samples (Milli‐Q, mineral, and wastewater). Separation, determination, and quantification were developed by HPLC‐DAD and a fluorescence detector (FD) connected in series. Factors influencing the IL‐DLLME procedure (sample pH, amount of IL, type and volume of disperser solvent, ionic strength, and assistance of vortex agitation) were investigated and optimized by means of a step‐by‐step approach. Once the optimum extraction conditions were established (10 mL of water at pH 8, 60 mg of [PPIm][PF₆], 500 μL of ACN as disperser solvent and vortex agitation for 1 min), the calibration curves of the whole method (IL‐DLLME‐HPLC‐DAD/FD) were obtained and precision and accuracy were evaluated. It was demonstrated that the developed methodology was repeatable, accurate, and selective with limits of detection in the 0.30–0.57 μg/L and 13.8–37.1 μg/L range for FD and DAD, respectively. Relative recovery values were higher than 85% for the different types of water samples and the Student's t test demonstrated that there were not significant differences between the added and the found concentration.     

Synthesis of on resin poly(propylene imine) dendrimer and its use as organocatalyst

Solid phase synthesis of poly(propylene imine) dendrimer is described. An iterative synthesis including double Michael addition of acrylonitrile to the primary amino groups on crosslinked polystyrene support followed by reduction of nitrile groups to amino groups give poly(propylene imine) dendrimers up to third generation attached to the polystyrene support. The supported dendrimer is used as an organocatalyst to Knoevenagel condensations. The supported catalyst showed good selectivity and the product was obtained in excellent yield under green reaction conditions. Densely packed amino groups enhance catalysis by a co-operative effect. The catalyst is recoverable and reusable.     

Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process

A laboratory selection of salinity for a low salinity water-low salinity surfactant (LS-LSS) process is presented in this paper with systematical investigation on surfactant phase behavior, interfacial tension (IFT), and dynamic retention in porous media with IOS2024 and isoamyl alcohol (IAA) as surfactant system. The results show that 0.4 wt% IOS2024 with 1 wt% IAA can provide ultra-low IFT of 10^?3 mN/m at around 3000–4000 mg/L total dissolved solids, but at that salinity range the surfactant retention is very high. The search for an optimum surfactant formulation has to consider solution properties and retention in addition to the low IFT. The salinity for a LS-LSS process should thus not be focused on either optimal salinity or ultra-low IFT, but instead the best choice could be a compromise between the properties in question. The three-phase region, where ultra-low IFT are found, is also associated with high retention values. However, we show that as salinity is increased from a two-phase region with oil solubilized in a water continuous microemulsion, there is a region close to the three-phase boundary which has potential. This region does not give ultra-low, but fairly low (10^?2 mN/m in this case) interfacial tensions, and also significantly lower retention.      

甘油酯化降酸反应过程研究

研究了酸化油甘油酯化反应降低酸值的反应过程,考察了温度、甘油与酸化油中游离脂肪酸物质的量比和单甘酯含量对反应的影响,发现甘油单甘酯能明显促进酯化反应的进行。对二元体系甘油三酯-甘油、油酸-甘油和单甘酯-甘油的液-液相平衡以及甘油-单甘酯-油酸三元体系液-液相平衡的分析结果表明,甘油单甘酯的存在能够显著提高甘油与脂肪酸的相互溶解。这较好地解释了甘油单甘酯在酸化油酯化反应中的促进作用。     

New polypyrrole–carbon nanotubes–silicon dioxide solid‐phase microextraction fiber for the preconcentration and determination of benzene,toluene, ethylbenzene,and o‐xylene using gas liquid chromatography

For the first time, a polypyrrole–carbon nanotubes–silicon dioxide composite film coated on a steel wire was prepared by an electrochemical method. Scanning electron microscopy images showed that this composite film was even and porous. The prepared fiber was used as an absorbent for the headspace solid‐phase microextraction of benzene, toluene, ethylbenzene, and o‐xylene, followed by gas chromatographic analysis. This method presented an excellent performance, which was much better than that of a polypyrrole–carbon nanotube fiber. It was found that under the optimized conditions, the linear ranges were 0.01–200 ng/mL with correlation coefficients >0.9953, the detection limits were 0.005–0.020 ng/mL, the relative standard deviations were 3.9–6.4% for five successive measurements with a single fiber, and the reproducibility was 5.5–8.5% (n = 3). Finally, the developed method was successfully applied to real water samples, and the relative recoveries obtained for the spiked water samples were from 91.0 to 106.7%.