Crosslinked poly(ethylene oxide) modified with tetraalkylammonium salts as phase transfer catalyst

Radiation crosslinked poly(ethylene oxide)s (PEO) modified with two tetraalkylammonium salts: allyldimethyldodecylammonium bromide and ethylmethacrylate dimethyldodecylammonium bromide were prepared. They have been characterized by elemental analysis, IR, ¹H-NMR spectra, and DSC measurements. Their activity as phase transfer catalysts (PTC) in the model displacement reaction of 1-bromooctane with aqueous sodium cyanide were studied. The reaction kinetics were followed under pseudo-first-order conditions. Small amounts of onium salt inserted into the PEO network gave rise to a five time increase in the rate constant. The recovered catalysts could be re-used without loss of activity. © 1995 John Wiley & Sons, Inc.     

Ion mobility,phase transitions,and ion transport in potassium-ammonium hexafluorozirconates

The mobility of fluoride and ammonium ions (180–480 K) in compounds K_{2? n} (NH4)_nZrF₆ (0.2 ≤ n ≤ 1.70) was investigated by ¹⁹F and ¹H NMR. Correlations have been found between the composition of the cation sublattice, the character of ion motions, and phase transition temperature in these compounds. The hightemperature modifications with n ≥ 0.85 of the compounds are characterized by translational diffusion of fluoride and ammonium ions and by uniaxial anisotropy of the ¹⁹F magnetic shielding tensor. The electrophysical characteristics of these compounds were studied in the temperature range 300–480 K.     

Polymerization-induced phase separation in polyether-sulfone modified epoxy resin systems: effect of curing reaction mechanism

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.     

Facial selectivity of the (R)-1,3-dimethyl-1-cyclohexyl cation in the gas phase

The model reaction between the (R)-1,3-dimethyl-1-cyclohexyl cation (I) and methanol has been investigated under gas-phase radiolytic conditions (750 Torr; 25-120 degrees C) with the aim of evaluating the intrinsic factors that govern the facial selectivity of biased carbocations. The peculiarity of the experimental approach allows the formation of different CH(3) (18)OH.I ionic adducts. Subsequent conversion of these adducts to give the corresponding E/Z covalent products follows different reaction coordinates, which are characterized by their own activation parameters. On the grounds of density functional theory (DFT) results, several [CH(3)OH.I] structures have been located on the relevant potential-energy surface (PES). The experimental results point to a gas-phase facial selectivity, which is mainly governed by entropic factors that arise as a result of the occurrence of different noncovalent ion-molecule "facial adducts" (FA). The formation of FAs may also play an important role in both the reaction dynamics and the positional selectivity. The present results cannot be interpreted by any of the models based on solution-phase experiments.     

Migration of Ethylene Terephthalate Oligomers from Roasting Bags into Olive Oil

Summary A high-performance liquid-chromatographic method with UV detection (HPLC–UV) has been developed for quantification of ethylene terephthalate oligomers in olive oil, from which they were extracted with acetonitrile. Oligomers, from monomers (M₁) to pentamers (M₅), were jointly and/or individually identified by liquid chromatography with mass spectrometry (electron-impact mass spectrometry (EIMS) low- and high-resolution) and were quantified by HPLC–UV using an acetonitrile solution of the major oligomer (the trimer M₃) as standard. For M₃ recovery was 98.9%, the detection limit was 60 g L^–2, and method precision was 2.03% (RSD). Migration of oligomers M₁–M₅ into 50 mL olive oil sealed in each of two brands of 10 cm × 10 cm poly(ethylene terephthalate) roasting bag was evaluated under two sets of conditions that approached but remained below the limit at which the bag material became physically deformed – heating for 7 min at 850 W in a microwave oven, or for 60 min at 200 °C in a conventional oven. Total migration was approximately 2.7 mg dm^–2 under the former conditions and 3.5–4.1 mg dm^–2 under the latter.Presented at the International Symposium on Separation and Characteristics of Natural and Synthetic Macromolecules, Amsterdam, The Netherlands, February 5–7, 2003     

Sensing of Trace Amounts of Dodecyl Benzene Sulfonate by Solid Phase Spectrophotometry

A very simple, selective and sensitive spectrophotometric method for the determination of dodecyl benzene sulfonate (DBS) has been investigated. In this method, the ion pair of DBS and methylene blue was adsorbed onto plasticized poly(vinylchloride) membrane as a solid phase extraction medium. The absorbance of the blue membrane was measured at 660nm against a blank membrane using a spectrophotometer. The influence of type and amount of plasticizer, pH, concentration of methylene blue, temperature of sample solution and time of extraction on the absorbance of membrane was studied. Linear calibration was obtained over a concentration range of 0.1 to 6.5µgmL^–1 of DBS. The method was applied to the determination of DBS in different commercial detergents. The precision and accuracy of the method is comparable with the conventional standard method. This method is cost-effective, and the use of organic solvent such as chloroform is completely eliminated.     

无机阴离子的毛细管电泳分析

本文研究了常见无机阴离子的毛细管电泳规律，考察了分离电压、电解质熔液组成、浓度、ｐＨ值等对分离的影响，建立了高效、快速的无机阴离子毛细管电泳分析方法。在选定的实验条件下，各种常见无机阴离子在５ｍｉｎ内达到完全分离，对Ｂｒ＾－和Ｃｌ＾－的分离柱效每米可达７６万理论板数。迁移时间的相对标准偏差小于１％，峰面积的相对标准偏差小于５％，各离子的最低检测浓度为０．０５￣０．５μｇ／ｍｌ。     

Surface modification by calcium ions—Effect on chromatographic properties of silica

Summary A liquid chromatographic method incorporating column-switching and fluorimetric detection for the determination of triamterene in untreated urine, is described. The urine samples (5 L) were directly introduced onto an Hypersil ODS-C18, 30 m (20 mm×2.1 mm I.D.) pre-column. Polar urinary compounds were removed by flushing the pre-column with water for 1 min, and the analyte was then switched onto an HP-LiChrospher RP C18,5 m (125 mm×4mm ID) analytical column using an acetonitrile/phosphate buffer gradient elution. Fluorescence detection was performed at 230 nm excitation and 430 nm emission wavelengths. The recovery of drug was 102±2% in the 0.10–20.0 g/mL concentration range, the limit of detection being 5 ng/mL. A validation of the usefulness of this procedure was accomplished by analysing urine extracts obtained from real samples.Hypersil ODS is not a product of Merck, Germany. Please give supplier (p. 5).     

Improvement of cyclosporin A determination in whole blood by reversed-phase high-performance liquid chromatography

A chromatographic method was developed for the determination of cyclosporin A in human whole blood using reversed-phase HPLC at room temperature. Most previous reports carried out this liquid chromatographic separation at temperatures above 70 degrees C. The present procedure greatly improves the detection limit by controlling peak broadening effects, as well as the lifetime of the column at room temperature. Under optimal conditions and using ketoconazole as an internal standard, the calibration graph was linear in the range of 16-1000 microg/L with a relative standard deviation of 3.72% at 150 microg/L and 2.45% at 300 microg/L (n = 11) of cyclosporin A. The detection limit was of 5.0 microg/L cyclosporin A. By this procedure, cyclosporin A pharmacokinetic parameters in healthy Chinese subjects were studied. The developed method could be applied to the quantification of cyclosporin A in human blood samples and allows the study of its pharmacokinetics in routine laboratories.     

Green organic syntheses: organic carbonates as methylating agents

Dimethylcarbonate (DMC) is a valuable methylating reagent that can replace methyl halides and dimethylsulfate in the methylation of a variety of nucleophiles. It couples tunable reactivity and unprecedented selectivity towards mono-C- and mono-N-methylation. In addition, it is a prototype example of a green reagent, because it is nontoxic, is made by a clean process, is biodegradable, and reacts in the presence of a catalytic amount of base, thereby avoiding the formation of undesirable inorganic salts as by-products. Depending on the reaction conditions, DMC can be reacted under plug-flow, CSTR, or batch conditions. Other remarkable reactions are those where DMC behaves as an oxidant. The reactivity of other carbonates is reported as well.