Chiral separation of enantiomers of amino acid derivatives by high-performance liquid chromatography on a norvancomycin-bonded chiral stationary phase

A novel norvancomycin-bonded chiral stationary phase (NVC-CSP) was synthesized by using the chiral selector of norvancomycin. The chiral separation of enantiomers of several dansyl-amino acids by high-performance liquid chromatography (HPLC) in the reversed-phase mode is described. The effects of some parameters, such as organic modifier concentration, column temperature, pH and flow rate of the mobile phase, on the retention and enantioselectivity were investigated. The study showed that ionic, as well as hydrophobic interactions were engaged between the analyte and macrocycle in this chromatographic system. Increasing pH of buffers usually improved the chiral resolution for dansyl--amino-n-butyric acid (Dns-But), dansyl-methionine (Dns-Met) and dansyl-threonine (Dns-Thr), but not for dansyl-glutamic acid (Dns-Glu) which contains two carboxylic groups in its molecular structure. The natural logarithms of selectivity factors (ln ) of all the investigated compounds depended linearly on the reciprocal of temperature (1/T), most processes of enantioseparation were controlled enthalpically. Interestingly, the process of enantioseparaton for dansyl-threonine was enthalpy-controlled at pH of 3.5, while at pH of 7.0, it was entropy-controlled according to thermodynamic parameters Δ_R,SΔH° and Δ_R,SΔS° afforded by Van’t Hoff plots. In order to get baseline separation for all the solutes researched, norvancomycin was also used as a chiral mobile phase additive. In combination with the NVC-CSP, remarkable increases in enanselectivity were observed for all the compounds, as the result of a “synergistic” effect.     

Phase-transfer agents as catalysts for a nucleophilic substitution reaction in microemulsions

The reaction between 4-tert-butylbenzyl bromide and potassium iodide was carried out in microemulsions based on different nonionic surfactants, and the reaction rates were compared with those obtained in two-phase systems with added phase-transfer agent, either a quaternary ammonium salt or a crown ether. The reactions were relatively fast in the microemulsions and extremely sluggish in the two-phase systems without additional phase-transfer agent. Addition of a phase-transfer agent did not accelerate the reaction when a hydrocarbon was used as organic solvent, neither in the two-phase system nor in the microemulsion. When a chlorinated hydrocarbon was used as solvent, phase-transfer catalysis became effective and the rate obtained in the two-phase system with an equimolar amount of phase-transfer agent added was higher than that obtained in the microemulsion. When a catalytic amount of phase-transfer agent was used, the rate in the two-phase system was about the same as the rate obtained in the microemulsion without the phase-transfer agent. The combined approach, that is, use of a microemulsion as the reaction medium and addition of a phase-transfer agent, gave the highest reaction rate. The quaternary ammonium salt (tetrabutylammonium hydrogen sulfate) was a more efficient catalyst in the microemulsion system than the crown ether ([18]crown-6).     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

The role of palladium catalyst and base in stereoselective transformations of (E)-2-chlorovinylsulfides

Stereoselective transformations of 2-chlorovinylsulfides in the presence of soluble (t-BuOK) or insoluble (solid KOH or Cs₂CO₃/18-crown-6) base and palladium catalyst (dppb)Pd(OAc)₂ have been studied. Depending on the substrate or catalytic system, the reaction leads to the formation of (E)-1,2-bis[aryl(or arylmethyl)thio]ethenes and/or (E)-1,4-bis[aryl(or arylmethyl)thio]-1-buten-3-ynes in yields of up to 93%.     

高效液相色谱-串联质谱法结合多糖衍生物手性固定相拆分氰戊菊酯

建立了以多糖衍生物为手性固定相的高效液相色谱-串联质谱(HPLC-MS/MS)直接拆分氰戊菊酯对映体的方法。在反相液相色谱条件下,考察了手性固定相的种类、流动相组成、柱温、流速对氰戊菊酯4个立体异构体分离的影响。同时,利用热力学方法对氰戊菊酯的立体异构体与固定相之间的色谱保留和分离的热力学机理进行了探讨。结果表明:采用Lux Cellulose-3(纤维素-三(4-甲基苯甲酸酯))手性色谱柱,在以流动相为乙腈-水(5 mmol/L甲酸铵)=(55:45,V:V)流速0.4 mL/min,柱温30℃的条件下,可在14 mins内实现氰戊菊酯4个立体异构体的基线分离。拓展了HPLC-MS/MS在菊酯类手性农药对映体分离及检测上的应用。     

Etude de l’isotherme 25°C du système quasi quaternaire H2O-Zn(NO3)2·6H2O-Cu(NO3)2·3H2O-NH4NO3;I- Isoplèthes 4 masse% NH4NO3, 8 ma

The solid-liquid equilibria of the quasi-quaternary system H₂O-Zn(NO₃)₂·6H₂O-Cu(NO₃)₂·3H₂O-NH₄NO₃ were studied at 25°C by using a synthetic method based on conductivity measurements. Three isoplethic sections has been established at 25°C and the stable solid phases which appear are: NH₄NO₃(IV), Zn(NO₃)₂·6H₂O, anhydrous Cu(NO₃)₂, Cu(NO₃)₂·3H₂O and metastable Cu(NO₃)·2.5H₂O. Neither double salts, nor mixed crystals are observed at these temperatures and composition range.     

Quantitative Analysis of Sulfonamide Residues in Natural Animal Casings by HPLC

A multiresidue method has been developed for the simultaneous determination of sulfadiazine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethoxydiazine, sulfamethylthiazole, sulfamethazine, sulfamonomethoxine, sulfamethoxypyridazine, sulfisoxazole, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in natural animal casings by HPLC after solid-phase extraction. The sulfonamides were extracted with acetonitrile and the extract cleaned up with an Oasis MCX SPE cartridge prior to analysis. Separation was on a ZOBAX Eclipse XDB-C₈ column using gradient elution with acetonitrile/methanol/0.1% acetic acid. The effect of separation conditions on chromatographic behavior and recovery has been studied. Calibration graphs were linear with very good correlation coefficients (r = 0.9983−0.9996) in the concentration range from 0.02 to 1 μg mL⁻¹. The limits of quantitation (LOQ) for the 13 sulfonamides were in the range of 1.5–2.2 μg kg⁻¹. Decision limits (CCα) and detection capabilities (CCβ) were in the range of 105.2–111.0 and 113.0–120.2 μg kg⁻¹, respectively. The recovery for casings spiked with 1.5–100 μg kg⁻¹ ranged from 65.2 to 85.9%. The relative standard deviations (RSDs) of the sulfonamides for six measurements at 100 μg kg⁻¹ were from 2.2 to 7.7%. The applicability of the method to the analysis of salted swine casings, salted sheep casings and dry casing samples was demonstrated.     

Effect of interacting nanoparticles on the ordered morphology of block copolymer/nanoparticle mixtures

We investigated the effect of hard additives, that is, magnetic nanoparticles (NPs) and metal NPs, on the ordered morphology of block copolymers by varying the NP concentration. To characterize the structural changes of a block copolymer associated with different NP loadings, small-angle X-ray scattering and transmission electron microscopy were performed. Monodisperse maghemite (γ-Fe₂O₃) NPs (7 nm in diameter) and silver (Ag) NPs (6 nm in diameter) with surfaces modified with oleic acids were synthesized, and a cylinder-forming poly(styrene-block-isoprene) diblock copolymer was used as a structure-directing matrix for the NPs. As the NP concentration increased, domains of NP aggregates were observed for both magnetic and metal NPs. In the case of mixtures of cylinder-forming poly(styrene-block-isoprene) and Ag NPs with weak particle–particle interactions, random aggregates of Ag NPs were observed, and the ordered morphology of the block copolymer lost its long-range order with an increase in the NP concentration. However, regular, latticelike aggregates obtained with γ-Fe₂O₃ NPs, because of the strong interparticle interactions, induced an intriguing morphological transformation from hexagonal cylinders to body-centered-cubic spheres via undulated cylinders, whereas the neat block copolymer did not show such a morphological transition over a wide range of temperatures. The interplay between magnetic NPs and the block copolymer was also tested with magnetic NPs of different sizes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3571–3579, 2006     

Etude du Systeme Ternaire Se-Te-Sn

This work is a part of the systematic study of the ternary based chalcogenides systems. The aim is to determine the phase equilibrium, and to determine the limits of the phase area. This is done in view to perfecting knowledge of elaboration conditions for new materials and to study of their physical properties. Few works have been devoted to the study of the ternary system Se-Te-Sn, only the cross section SnSe-SnTe has been studied [1] and [2]. The experimental study by DTA, DSC and X-ray diffraction on powder performed at room temperature, exhibits a miscibility gap in the liquid state which narrows as it goes through the Sn-Se binary system. Three cross sections behave as ‘quasi-binary‘ system and six ternary invariants have been exhibited: three ternary eutectics and three ternary quasi-peritectics. This revised version was published online in July 2006 with corrections to the Cover Date.