Structural Peculiarities and Thermoelectric Study of Iron Indium Thiospinel

The homogeneity range of ternary iron indium thiospinel at 873 K was investigated. A detailed study was focused on two distinct series (y=z): 1) a previously reported charge-balanced (In_0.67+0.33y□_0.33−0.33y)_tetr[In_2−zFe_z]_octS₄ (A1-series; □ stands for vacancy; the abbreviations “tetr” and “oct” indicate atoms occupying tetrahedral 8a and octahedral 16d sites, respectively) and 2) a new charge-unbalanced (In_0.67+y□_0.33−y)_tetr[In_2−zFe_z]_octS₄ (A2-series). Fe atoms were confirmed to exclusively occupy an octahedral position in both series. An unusual reduction of the unit cell parameter with increasing Fe content is explained by differences in the ionic radii between Fe and In, as well as by an additional electrostatic attraction originating from charge imbalance (latter only in A2-series). The studied compound is an n-type semiconductor, and its charge carrier concentration increases or decreases for larger Fe content within the A1- and A2-series, respectively. The thermal conductivity κ_tot is significantly reduced upon increasing vacancy concentration, whereas the change of power factor is insufficient to drastically improve the thermoelectric figure of merit.     

基于气液相化学发光技术的臭氧在线检测方法

基于鲁米诺(luminol) 化学发光体系,采用自主研发的在线臭氧浓度检测仪,建立了一种实时在线检测臭氧浓度的方法,用于分析测定痕量浓度水平的臭氧气体。 考察了鲁米诺、氢氧化钾、部分醇类化合物和表面活性剂等因素对化学发光强度的影响。 结果表明,在鲁米诺(0.005 mol/L)、氢氧化钾(0.05 mol/L)体系中加入乙二醇(体积分数1.5%)、甲醇(体积分数1.5%)、乙醇(体积分数1.0%)、丙三醇(体积分数3.0%)能显著增强鲁米诺体系检测O₃的化学发光信号,而甲醛溶液 (体积分数3.0%)能有效抑制NO₂信号的干扰。 同时,测得检测臭氧的检出限为1.26 μg/m³、相对标准偏差为0.32%,相对误差为0.75%。 利用该体系测定臭氧,具有信号稳定、精密度好、准确度高、检出限低等优点,适用于大气中微量O₃的在线连续检测。     

生物凝聚态物质的多层次结构表征

在生物体内到处都是由蛋白质、核酸和多糖等生物大分子构成的各种不同生物凝聚态物质,这些生物凝聚态物质形成不同的高级结构,执行不同的生物功能。获取这些生物凝聚态物质的高分辨结构是理解生命过程的重要途径。在离体环境中,获取高分辨结构的手段主要有X-射线晶体衍射、冷冻电镜和核磁共振等,而在活细胞内原位研究生物凝聚体的结构,核磁共振和化学交联质谱具有独特优势。本文总结了利用多种分析手段对生物凝聚态物质进行多层次结构表征的研究进展:包括简单纯化体系下的蛋白质分子机器,蛋白质纤维等;液-液相分离,大分子拥挤、限域等模拟细胞复杂环境下的生物大分子以及活细胞内生物大分子。     

2D Oligosilyl Metal–Organic Frameworks as Multi‐state Switchable Materials

We report the synthesis of a set of 2D metal–organic frameworks (MOFs) constructed with organosilicon‐based linkers. These oligosilyl MOFs feature linear Si_nMe_2n(C₆H₄CO₂H)₂ ligands (lin‐Si_n, n=2, 4) connected by Cu paddlewheels. The stacking arrangement of the 2D sheets is dictated by van der Waals interactions and is tunable by solvent exchange, leading to reversible structural transformations between many crystalline and amorphous phases.     

Chromatographic study of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse phase stationary phase with methyl-β-cyclodextrin as mobile additive

Abstract

The elution behavior of four sesquiterpenoids in volatile oil of Curcumae Rhizoma on reverse-phase high-performance liquid chromatography with methyl-β-cyclodextrin as mobile phase additive was studied, including germacrone, curzerene, furanodiene, and β-elemene. Stoichiometric ratio and apparent formation constants of inclusion complex formed by methyl-β-cyclodextrin and each analyte were calculated by varying the concentration of the additive in the mobile phase composed of methanol and water (90:10, v/v), in which the association constant for inclusion complex formed by the organic modifier methanol and methyl-β-cyclodextrin was also determined. Results showed that the stoichiometric ratio of all the inclusion complex was 1:1 when 0–9?mmol L^?1 of methyl-β-cyclodextrin was added in the mobile phase. Unusual retention behavior of the analyte germacrone was found, which was further investigated by the calculation of thermodynamic parameters. Meanwhile, enthalpy and entropy of the inclusion complexes and solute-stationary phase interactions were determined by linear van’t Hoff plots.     

A Molecular Thermochromic Ferroelectric

Molecular ferroelectrics have attracted considerable interests because of their easy and environmentally friendly processing, low acoustical impedance and mechanical flexibility. Herein, a molecular thermochromic ferroelectric, N,N′‐dimethyl‐1,4‐diazoniabicyclo[2.2.2]octonium tetrachlorocuprate(II) ([DMe‐DABCO]CuCl₄) is reported, which shows both excellent ferroelectricity and intriguing thermochromism. [DMe‐DABCO]CuCl₄ undergoes a ferroelectric phase transition from Pca2₁ to Pbcm at a significantly high Curie temperature of 413 K, accompanied by a color change from yellow to red that is due to the remarkable deformation of [CuCl₄]^2? tetrahedron, where the ferroelectric and paraelectric phases correspond to yellow and red, respectively. Combined with multiple bistable physical properties, [DMe‐DABCO]CuCl₄ would be a promising candidate for next‐generation smart devices, and should inspire further exploration of multifunctional molecular ferroelectrics.     

Multivalent ions and biomolecules: Attempting a comprehensive perspective

Ions are ubiquitous in nature. They play a key role for many biological processes on the molecular scale, from molecular interactions, to mechanical properties, to folding, to self-organisation and assembly, to reaction equilibria, to signalling, to energy and material transport, to recognition etc. Going beyond monovalent ions to multivalent ions, the effects of the ions are frequently not only stronger (due to the obviously higher charge), but qualitatively different. A typical example is the process of binding of multivalent ions, such as Ca²⁺, to a macromolecule and the consequences of this ion binding such as compaction, collapse, potential charge inversion and precipitation of the macromolecule. Here we review these effects and phenomena induced by multivalent ions for biological (macro)molecules, from the “atomistic/molecular” local picture of (potentially specific) interactions to the more global picture of phase behaviour including, e. g., crystallisation, phase separation, oligomerisation etc. Rather than attempting an encyclopedic list of systems, we rather aim for an embracing discussion using typical case studies. We try to cover predominantly three main classes: proteins, nucleic acids, and amphiphilic molecules including interface effects. We do not cover in detail, but make some comparisons to, ion channels, colloidal systems, and synthetic polymers. While there are obvious differences in the behaviour of, and the relevance of multivalent ions for, the three main classes of systems, we also point out analogies. Our attempt of a comprehensive discussion is guided by the idea that there are not only important differences and specific phenomena with regard to the effects of multivalent ions on the main systems, but also important similarities. We hope to bridge physico-chemical mechanisms, concepts of soft matter, and biological observations and connect the different communities further.     

Control of Intrachain Morphology in the Formation of Polyfluorene Aggregates on the Single-Molecule Level

Controlling the morphology of π-conjugated polymers for organic optoelectronic devices has long been a goal in the field of materials science. Since the morphology of a polymer chain is closely intertwined with its photophysical properties, it is desirable to be able to change the arrangement of the polymers at will. We investigate the π-conjugated polymer poly(9,9-dioctylfluorene) (PFO), which can exist in three distinctly different structural phases: the α-, β-, and γ-phase. Every phase has a different chain structure and a unique photoluminescence (PL) spectrum. Due to its unique properties and the pronounced spectral structure-property relations, PFO can be used as a model system to study the morphology of π-conjugated polymers. To avoid ensemble averaging, we examine the PL spectrum of single PFO chains embedded in a non-fluorescent matrix. With single-molecule spectroscopy the structural phase of every single chain can be determined, and changes can be monitored very easily. To manipulate the morphology, solvent vapor annealing (SVA) was applied, which leads to a diffusion of the polymer chains in the matrix. The β- and γ-phases appear during the self-assembly of single α-phase PFO chains into mesoscopic aggregates. The extent of β- and γ-phase formation is directed by the solvent-swelling protocol used for aggregation. Aggregation unequivocally promotes formation of the more planar β- and γ-phases. Once these lower-energy more ordered structural phases are formed, SVA cannot return the polymer chain to the less ordered phase by aggregate swelling.     

Preparative isolation of arylbutanoid‐type phenol [(‐)‐rhododendrin] with peak tailing on conventional C18 column using middle chromatogram isolated gel column coupled with reversed‐phase liquid chromatography

Reversed‐phase liquid chromatography coupled with middle chromatogram isolated gel column was employed for the efficient preparative separation of the arylbutanoid‐type phenol [(‐)‐rhododendrin] from Saxifraga tangutica. Universal C18 (XTerra C18) and XCharge C18 columns were compared for (‐)‐rhododendrin fraction analysis and preparation. Although tailing and overloading occurred on the XTerra C18 column, the positively charged reversed‐phase C18 column (XCharge C18) overcame these drawbacks, allowing for favorable separation resolution, even when loading at a on a preparative scale (3.69 mg per injection). The general separation process was as follows. First, 365.0 mg of crude (‐)‐rhododendrin was enriched from 165 g Saxifraga tangutica extract via a middle chromatogram isolated gel column. Second, separation was performed on an XTerra C18 preparative column, from which 73.8 mg of the target fraction was easily obtained. Finally, the 24.0 mg tailing peak of (‐)‐rhododendrin on XTerra C18 column was selectively purified on the XCharge C18 analytical column. These results demonstrate that the tailing nonalkaloid peaks can be effectively used for preparative isolation on XCharge C18 columns.