Magnetic Anisotropy and the Appearance of Stripe Magnetic Domains in Co/Fe Multilayers

Thin Co/Fe multilayers were e-beam evaporated in ultra-high vacuum, keeping constant the Co layer thickness and varying that of Fe in the 0.5÷15 nm range. By increasing the Fe layer thickness, a component of magnetization perpendicular to the film plane rises up, and long and parallel magnetic domains (stripe domains) appear. The phenomenon is explained on the basis of the competition between the magnetoelastic anisotropy induced by stresses at the interfaces, and the shape anisotropy constraining the magnetization in the film plane. This revised version was published online in August 2006 with corrections to the Cover Date.     

外加磁场对Co纳米线生长过程的影响

关键词：     

Magnetic properties of (Co Pd ) superstructures on Pd(100) and Pd(111)

The magnetic properties of (Co_nPd_m)_r superstructures on Pd(100) and Pd(111) are evaluated using the fully-relativistic spin-polarized screened Korringa-Kohn-Rostoker method. It is found that only in the case of a Pd(111) substrate such superstructures exhibit perpendicular magnetism, while on a Pd(100) substrate the magnetization is oriented in-plane. Also investigated is the effect of interdiffusion in repeated superstructures. By using the inhomogeneous coherent potential approximation (CPA) for layered systems the effect of ordering into (repeated) superstructures can be described in an ab-initio-like manner. It is found that already small amounts of interdiffusion can be decisive for the actual value of the magnetic anisotropy energy. Received 3 November 1999 and Received in final form 18 January 2000     

The scattering and transmission of elastic waves in quasi-two-dimensional planar waveguides with linear defect boundaries

The influence of linear defect boundaries on the transmission and scattering of elastic waves in quasi-two-dimensional wave-guides is studied using the matching method. A linear defect boundary separating two wave-guide crystalline lattice domains is characterised here by a linear chain of defect masses and by modified elastic constants in the boundary, different from their values in the bulk of the domains. In particular a square lattice is considered to model the domains of the two-dimensional planar wave-guide containing the linear defect. The reflection and transmission probabilities, and the total transmission probabilities are calculated numerically and presented for the scattering processes in a variety of cases. We show that the interaction between the localised modes introduced by the defect boundary and the propagating modes of the system leads to Fano resonances. These resonances shift to higher (lower) frequencies for smaller (larger) defect masses, and for the same mass as function of the angle of the incident wave. Other spectral features shown to exist are due to interference effects especially at oblique incidence and when modifying the boundary elastic constants. Received 8 November 1999 and Received in final form 14 January 2000     

Superconducting and magnetic properties of Nb/Pd 1-xFex/Nb triple layers

The superconducting and magnetic properties of Nb/Pd_1-xFe_x/Nb triple layers with constant Nb layer thickness d_Nb=200 ? and different interlayer thicknesses 3 ?≤ d_PdFe ≤ ? are investigated. The thickness dependence of the magnetization and of the superconducting transition temperature shows that for small iron concentration x the Pd_1-xFe_x layer is likely to be in the paramagnetic state for very thin films whereas ferromagnetic order is established for x ≥ 0.13. The parallel critical field B_c2||(T){B_{c2||}}(T) exhibits a transition from two-dimensional (2D) behavior where the Nb films are coupled across the interlayer, towards a 2D behavior of decoupled Nb films with increasing d_PdFeand/or x. This transition allows a determination of the penetration depth x_F{\xi _F} of Cooper pairs into the Pd_1-xFe_x layer as a function of x. For samples with a ferromagnetic interlayer x_F{\xi _F} is found to be independent of x.     

Si／SiNx／SiO2多层膜的光致发光

采用射频磁控溅射法,制备了具有强光致可见发光的纳米Si/SiNx/SiO2多层膜,利用傅立叶红外吸收(FTIR)谱,光致发光(PL)谱对其进行了研究。用260nm光激发得到的PL谱中观察到高强度的392nm(3.2eV)和670nm(1.9eV)光致发光峰,分析认为它们分别来自于缺陷态≡Si-到价带顶和从导带底到缺陷态≡Si-的辐射跃迁而产生的光致激发辐射复合发光。PL谱中只有370nm(3.4eV)处发光峰的峰位会受退火温度的影响,结合FTIR谱认为370nm发光与低价氧化物—SiOx(x<2.0)结合体有密不可分的关系。当SiO2层的厚度增大时,发光强度有所增强,800℃退火后出现最强发光,认为具有较大SiO2层厚度的Si/SiNx/SiO2结构多层膜更有利于退火后形成Si—N网络,能够得到更高效的光致发光。用量子限制-发光中心(QCLC)模型解释了可能的发光机制,并建立了发光的能隙态(EGS)模型。     

Compositional and electrical properties of Cr,Nb, Cr/Nb,CrNbN, and CrN/NbN multilayers grown using the d.c. magnetron sputtering technique

Cr, Nb, Cr/Nb, CrN_x, NbN_x, CrNbN, and (CrN/NbN)_n structures were produced on Si and glass substrates, using the d.c. magnetron sputtering technique. Compositional analysis, based on binding energies of Cr, Nb, and N, was carried out by means of X-ray photoelectron spectroscopy (XPS). Through Auger electron spectroscopy (AES), depth profiles were obtained, allowing to demonstrate the multilayers production. Surface morphological characteristics, as roughness and grain size, were evaluated by atomic force microscopy (AFM), revealing very smooth surfaces, that is a consequence of the deposition parameters used in the synthetization experiments. Finally, for different configurations, conductivity measurements were carried out, revealing the influence of nitrogen content and temperature on electron transport. It was found that substoichiometric nitrides (CrN_0.35 and NbN_0.12) exhibited the highest conductivity, because the nitrogen atoms act as donor of electrons.     

Development of polyelectrolyte multilayer-coated electrospun cellulose acetate fiber mat as composite membranes

Electrostatic multilayers of chitosan (CHI)/sodium alginate (SA) and CHI/poly(styrene sulfonate) sodium salt (PSS) were alternatively coated on electrospun cellulose acetate (CA) fiber mat. Morphologies of the composite membranes were characterized by scanning electron microscopy. The morphology of the CHI/SA-coated membrane was denser than the CHI/PSS-coated one. The top layers consisted of carboxyl and sulfonic functional groups for SA and PSS layers, respectively. Amino groups of CHI were only presented in slight quantity. X-ray photoelectron spectroscopy (XPS) confirmed the deposition of the amino groups of CHI on the multilayer membrane surface. These composite membranes were characterized for its water permeability where the water flux decreased with an increase in the number of the bilayers. The water flux was in the range of 60 and 40 L m⁻² h⁻¹ for 15 and 25 bilayered membranes, respectively. The sodium chloride (NaCl) solution flux was lower than the pure water flux due to the effect of osmotic pressure, and it decreased with an increase in the NaCl concentration. The rejection of NaCl increased substantially with the number of the bilayers of the polyelectrolytes multilayers. The level of NaCl rejection from this work was in the range of 6% and 15% for 15 and 25 bilayered membranes, respectively.     

Characterization of trace embedded impurities in thin multilayer structures using synchrotron X‐ray standing waves

X‐ray standing wave (XSW) field generated under Bragg reflection condition in a periodic Mo/Si multilayer structure has been used to determine the concentration and location of various trace element contaminants embedded in different layers of that multilayer structure. We have used intense synchrotron X rays for XSW analysis. It is observed that various trace element impurities such as Cr, Fe, Ni and W get embedded unintentionally in the multilayer structure during the deposition process. Consequences of such impurity incorporation on the optical properties of the multilayer structure are discussed in hard and soft X‐ray regions. Present measurements are important in order to optimize the deposition methods on one hand and to better correlate the measured optical properties of a multilayer structure with theoretical models on the other. Copyright © 2010 John Wiley & Sons, Ltd.     

Low Temperature Preparation of High Refractive Index and Mechanically Resistant Sol-gel TiO2 Films for Multilayer Antireflective Coating Applications

TiO₂ sol-gel thin films have attracted a large attention for applications which require high refractive index transparent layers. In this work, sol-gel TiO₂ layers were prepared by Aerosol-gel deposition followed by a thermal treatment procedure in air. Depending on the experimental conditions, abrasion resistant and high refractive index layers could be obtained after post-treatment at only 110°C. In this paper, the experimental parameters which allow the preparation of functional TiO₂ sol-gel layers at such low temperature are discussed. It is concluded that the preparation of high refractive index and mechanically resistant TiO₂ layers can be interpreted in terms of competition between polycondensation and densification mechanisms. This result allows to envisage the sol-gel processing at low temperature of multilayer antireflective coatings.