Enhancing effect of DNA on chemiluminescence from the decomposition of hydrogen peroxide catalyzed by copper(II)

In the absence of any special luminescence reagent, emission of weak chemiluminescence has been observed during the decomposition of hydrogen peroxide catalyzed by copper(II) in basic aqueous solution. The intensity of the chemiluminescence was greatly enhanced by addition of DNA and was strongly dependent on DNA concentration. Based on these phenomena, a flow-injection chemiluminescence method was established for determination of DNA. The chemiluminescence intensity was linear with DNA concentration in the range 2×10^–7–1×10^–5 g L^–1 and the detection limit was 4.1×10^–8 g L^–1 (S/N=3). The relative standard deviation was less than 3.0% for 4×10^–7 g L^–1 DNA (n=11). The proposed method was satisfactorily applied for determination of DNA in synthetic samples. The possible mechanism of the CL reaction is discussed.     

非晶态NiP（B）／Al2O3催化一氧化碳，水和氧气合成过氧化氢

Hydrogenperoxideisagreenoxidantwithgreatpotentialformuchapplication .Thepresentproduc tionofhydrogen peroxiderequiressevereconditionsand generates pollutants .AlternativesynthesesarerequiredandthesynthesisofH2 O2 fromCO ,H2 OandO2 isverypromising .AsshowninEq(1) ,thesynthesisisthermodynamicallyfavored :CO +H2 O +O2 H2 O2 +CO2 (1)ΔG02 98=- 134kJ/mol　　ThereactionwasfirstreportedbyZudinetal[1]whousedpalladiumtriphenylphosphaneasacatalyst.Bianchietal[2 ] usedabiphasesystemforthesynthe …     

Grape tissue-based electrochemical sensor for the determination of hydrogen peroxide

The use of grape tissue as a source of catalase for the determination of hydrogen peroxide is reported. A slice of grape tissue attached to the membrane of a Clark-type oxgen sensor was used to monitor the oxidation of hydrogen peroxide by catalase. At the steady state, the sensor responds linearly to hydrogen peroxide in the concentration range 1 × 10^?5–5 × 10^?4 M. The response time (T₉₀) was of the order of 1 min for this sensor. No interference was observed from ethanol, amino acids, glucose and lactic acid. The long-term stability of the grape tissue sensor was much better than previously reported immobilized enzyme and liver tissue-based hydrogen peroxide sensors.     

Carvone epoxidation by system “hydrogen peroxide-[Mn2L2O3][PF6]2 (L = 1,4,7-trimethyl-1,4,7-triazacyclononane)-carboxylic acid”: a combinatorial approach to the process optimization?

Summary Epoxidation of natural terpene (+)-carvone by the system consisting of a catalyst, oxalic acid (co-catalyst) and H₂O₂ (70% aqueous solution; oxidant) was studied and factorial design methods were applied for the optimization of this reaction. A dinuclear manganese(IV) complex [LMn(O)₃MnL](PF₆)₂ (L = 1,4,7-trimethyl-1,4,7-triazacyclononane) was used as a catalyst, and acetonitrile was employed as a solvent. An analysis by methods of the complete 2⁴ factorial design showed that an increase in the catalyst concentration gives a strong positive effect on the carvone conversion and selectivity. Hydrogen peroxide has a smaller positive effect on the conversion, but at high concentration, H₂O₂ leads to some decrease in the selectivity. An increase in the oxalic acid concentration has a beneficial effect on the conversion, but does not affect the selectivity.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Acridinium ester chemiluminescence: pH dependent hydrolysis of reagents and flow injection analysis of hydrogen peroxide and glutamate

An automated analysis system is described for the measurement of hydrogen peroxide based on a chemiluminescence reaction with phenyl 10-methylacridinium-9-carboxylate (PMAC). A reversed FIA experimental arrangement is used to establish the operating conditions for the measurement of submicromolar levels of hydrogen peroxide. The carrier stream consists of hydrogen peroxide standards prepared in a pH 9.0, boric acid buffer and the flow rate for this carrier/sample stream is 4 ml/min. Twenty microliters of a 10 mM PMAC solution, prepared in a pH 3 phosphate buffer, are injected into the carrier/sample stream. Hydrogen peroxide mixes with the PMAC reagent in an incubation coil that is constructed by wrapping 107 cm of polyethylene tubing around a 1 cm o.d. plastic rod. The chemiluminescence reaction is then initiated by adding base just before the sample passes in front of a photomultiplier tube (PMT) detector. The calculated limit of detection (S/N = 3) for hydrogen peroxide is 0.25 M. In addition, the pH dependent hydrolysis of the PMAC reagent is characterized by an HPLC method which has been specifically developed for the separation and detection of the hydrolysis products of PMAC. Results indicate that a pH of 3.0 is required for long term stability of the PMAC reagent. Finally, this system has been successfully extended to the measurement of glutamate by coupling a bioreactor column of glutamate oxidase with the hydrogen peroxide detection scheme. A detection limit (S/N = 3) of 0.5 M has been established for glutamate with a throughput of 200 samples per hour.     

Oxidation of methyl phenyl sulfide with hydrogen peroxide catalyzed by Ti(IV)-substituted heteropolytungstate

Alkylammonium salts of Ti(IV)-substituted heteropolytungstate, PW₁₁TiO ₁₀ ⁵⁻ , catalyze the oxidation of methyl phenyl sulfide with hydrogen peroxide. The yield of the corresponding sulfoxide and sulfone is practically quantitative. A³¹P NMR study confirms the formation and reactivity of the PW₁₁O₃₉TiO ₂ ⁵⁻ peroxo complex in organic media.     

倍数光度滴定法测定微量过氧化苯甲酰

联合应用BPO与KIO3(在KI存在下)的倍增反应和光度滴定数据的二阶导数法处理,使面粉中微量BPO测定的灵敏度较常规碘量法提高了200倍,方法的检出限可达0.1 mg.L-1。在面粉实样分析中,测定结果的RSD值在1.3%~2.8%之间,加标回收率在98.6%~102.2%之间。提出的方法所得测定结果与国标法(GB/T 18415-2001)所得结果一致。