Reducing Agents for Improving the Stability of Sn‐based Perovskite Solar Cells

Organic‐inorganic hybrid perovskite solar cells (PSCs) have aroused tremendous research interest for their high efficiency, low cost and solution processability. However, the involvement of toxic lead in state‐of‐art perovskites hinders their market prospects. As an alternative, Sn‐based perovskites exhibit similar semiconductor characteristics and can potentially achieve comparable photovoltaic performance in comparison with their lead‐based counterparts. The main challenge of developing Sn‐based PCSs lies in the intrinsic poor stability of Sn²⁺, which could be oxidized and converted to Sn⁴⁺. Notably, introduction of SnX₂ (X=Cl, Br, I) additive becomes indispensable in the fabrication process, which highlights the importance of incorporating a reducing agent to improve the device stability. Additionally, efforts are made to utilize other reducing agents with different functions for the further enhancement of device performance. Currently, Sn‐based PSCs could attain a record efficiency over 10% with great stability. In this review, we present the recent progress on reducing agents for improving the stability of Sn‐based PSCs, and we hope to shed light on the challenges and opportunities of this research field.     

Beyond Perovskite Solar Cells: Tellurium Iodide as a Promising Light‐Absorbing Material for Solution‐Processed Photovoltaic Application

Searching new light‐absorbing materials to replace toxic lead halide in solar cells is very important and highly desirable. In this research, we firstly demonstrated that tellurium iodide (TeI₄) could be used as a light‐absorbing material in solar cells due to its suitable optical band gap and the active lone‐pair electron orbital in Te⁴⁺. The best power conversion efficiency (PCE=3.56%) was achieved with a concentration of 0.9 M TeI₄ in DMF:DMSO (4 : 1, v,v) without any heat treatment or antisolvent dripping. Our study indicates the promising potential of TeI₄ for photovoltaic and optoelectronic applications.     

Cr掺杂对Nd0.7Sr0.3MnO3电磁性质的影响

我们对多晶样品Nd0.7Sr0.3Mn1-xCrxO3(x≤0.30)进行了X射线衍射谱、电阻温度关系和磁化强度测量.实验发现:随Cr掺杂量的增加,样品的电阻率变大,电阻峰温度和居里温度降低,这是由Cr的介入弱化了双交换作用所致;在x=0.10附近,电阻出现了双峰现象,在其M~T上没有发现与低温峰对应的磁性异常;在锰位磁矩与Cr含量的关系中发现,Cr掺杂对样品的磁性几乎无贡献;通过分析,我们用相分离的图象解释了有关的现象.     

近紫外激发Gd2ZnTiO6∶Eu3+,Li+红色荧光粉的制备及荧光性能

采用溶胶-凝胶法成功制备出系列Eu³⁺掺杂和Li⁺、Eu³⁺共掺杂Gd₂ZnTiO₆红色荧光粉,并研究Li⁺、Eu³⁺掺杂对样品的晶体结构、微观形貌及发光性能的影响。结果显示,所制备的Gd₂ZnTiO₆∶Eu³⁺,Li⁺(GZT∶Eu³⁺,Li⁺) 荧光粉为双钙钛矿结构,属于单斜晶系(空间群:P2₁/n),大小为10 μm的无规则形状的颗粒。在395 nm近紫外光的激发下,GZT∶Eu³⁺的发射光谱展示出典型的Eu³⁺线状特征光谱,发射峰中心位于615 nm处,归属于Eu³⁺的⁵D₀→⁷F₂跃迁。Eu³⁺的最佳掺杂浓度为0.07(摩尔分数),样品显示明显的浓度猝灭效应,其机制为电偶极子-电偶极子(d-d)相互作用。此外,研究还发现,Li⁺掺杂对样品的晶体结构、微观形貌没有影响,但是一定量的Li⁺掺杂可以显著增强样品的荧光强度。当Li⁺浓度为0.05时,荧光粉发射主峰强度增强程度最大,提高至原来的4.3倍,说明通过Li⁺、Eu³⁺共掺杂可以获得高亮度的GZT红色荧光粉。GZT∶0.14Eu³⁺,0.05Li⁺荧光粉的CIE色坐标为(0.631 1,0.375 3)与标准红光色坐标(0.670,0.330)较为接近,是一种潜在的LED用红色荧光粉。     

无机钙钛矿太阳能电池Cs2SnI6的电子结构和光学性质的第一性原理研究

近年来,Cs2SnI6作为一种无毒性、稳定性好的新型钙钛矿材料应用于太阳能电池中,其电池的光电转换效率由最初不到1%增长到现在的8.5%,使之成为有可能替代铅基钙钛矿太阳能电池的新型太阳能电池。本文采用基于广义密度泛函和杂化密度泛函的第一性原理方法研究了Cs2SnI6的电子结构、光学特性和钙钛矿太阳能电池的光电性能参数。研究结果表明,导带底和价带顶位于同一高对称点Γ而属于直接跃迁型半导体,且电子态主要来自于I-5p轨道和Sn-5s轨道。在近红外和可见光波长范围内有较高的吸收系数,当Cs2SnI6钙钛矿厚度达到10μm时,吸收率在311~989 nm之间接近100%,不考虑潜在损失的情况下,理论上太阳能电池可获得短路电流为32.86 mA/cm2、开路电压0.91 V、填充因子87.4%、光电转换效率26.1%。为实验上制备高效Cs2SnI6钙钛矿太阳能电池提供了参考。     

Highly efficient perovskite solar cells by tuning electronic structures of thienothiophene-based as hole transport materials

The atomic substitutions were used to study the hole transport materials (HTM) properties of six thiophenothiophene molecules (HTM1-HTM6) to reveal the relationship between their core structures and photoelectric properties. To better investigate the difference between experimentally original and designed molecules, we calculated the hole mobility and some parameters (such as energy levels, stability, and optical properties, etc). The results showed that the molecular orbital levels of the original and designed molecules have well matched with perovskite and Ag electrode to ensure hole transport and inhibit the electron reflux. Among the designed HTMs, HTM5 has the smallest energy gap that results in the red-shifted absorption spectra. Furthermore, there is an obviously increased charge transfer integral V due to the introduction of the Si atom, which greatly improved the hole mobility. Therefore, atom substitution by introducing Si atoms (HTM5) will improve the energy levels and charge transport ability, and molecular design by means of atom substitution can be a potential way to tunable HTM performance in solar cells.     

钙钛矿组分和结构设计及其发光二极管器件性能研究进展

有机-无机杂化钙钛矿发光二极管(LED)的性能在短短几年时间内飞速提升,近红外光器件的效率己达21.6％,绿光器件效率也达到20.3％,达到可以和商业化的有机发光二极管媲美的水平;即使是稍有逊色的稳定性方面也有很大进展,报道的最长器件半衰期已达到250 h.器件性能的飞速提升得益于钙钛矿本身优异的光电性质,而且通过丰富...     

二维钙钛矿光伏器件

有机-无机杂化卤化物钙钛矿太阳能电池(perovskite solar cells, PSCs)由于其成本低廉、制备工艺简单、光电转换率高等优点引起了越来越多的关注,在下一代半导体光伏技术中显示出巨大的发展潜力。然而PSCs器件在商业化生产应用之前,必须解决某些关键问题,例如器件在湿度、光照和过热条件下缺乏稳定性,性能会急剧衰退。层状二维(two-dimensional, 2D)钙钛矿由于其优异的环境稳定性而受到研究人员的广泛关注。通过引入不同种类的疏水性大体积有机铵阳离子可以在钙钛矿体内形成稳定的2D结构。然而,由于绝缘有机间隔阳离子的存在,使其电荷输运能力受阻并影响光电转换性能。本文根据不同种类2D钙钛矿光伏器件的发展进程,总结了影响2D钙钛矿结构和性能的关键问题,如晶体垂直取向设计、量子阱调控和有机层间隔阳离子替换工程等。最后对2D PSCs的未来发展进行展望。