永磁体辅助下单畴GdBCO超导体和永磁体之间的磁悬浮力研究

通过对永磁体辅助下单畴GdBCO超导体和圆柱形永磁体在液氮温度、零场冷、轴对称情况下磁悬浮力的测量,研究了两种不同组态下辅助永磁体对超导体磁悬浮力特性的影响.实验结果表明,当长方体辅助永磁体水平磁化、且磁极N指向超导体时,超导体的最大磁悬浮力从没有引入辅助永磁体的29.8 N增加到61.5 N,增加为没有引入辅助永磁体时的206%.当长方体辅助永磁体的N极与圆柱形永磁体的N极反平行时,超导体的最大磁悬浮力从没有引入辅助永磁体的29.8 N减小到19.6 N,减小为无辅助永磁体时的65.8%.这些研究结果说明,通过科学合理地设计超导体和永磁体的组合方式,能有效地提高超导体的磁悬浮力.该研究结果对促进超导体的应用具有重要的指导意义. 关键词： 单畴GdBCO 永磁体 磁悬浮力     

Analysis of temperature and concentration dependence of flow stress in KCl–KBr single crystals with special reference to solute distribution

Available data on the temperature and concentration dependence of critical resolved shear stress (CRSS) of KCl–KBr solid-solution crystals containing 9, 17, 27 and 45?mol% KBr in the temperature range 77–230?K have been analyzed within the framework of the kink-pair nucleation model of plastic flow in solid- solution crystals. It is found that CRSS τ decreases with increasing temperature T in accordance with the model relation lnτ?=?A???BT, where A and B are positive constants. The CRSS τ at a given temperature depends on solute concentration c as τ?∝?c^p , where exponent p has a value between 0.33 and 0.57 as temperature T rises from 0 to 230?K. The model parameter W _o, i.e. binding energy between the edge-dislocation segment L _o involved in the unit activation process and the solute atoms close to it (T?→?0?K), which is inversely proportional to B, increases with solute concentration c monotonically as W _o?∝?c ^0.33 up to a critical value c _m?=?35?mol% KBr, which is in reasonable agreement with the model prediction W _o?∝?c ^0.25. However, W _o decreases with an increase in c beyond c _m, which indicates somewhat ordered distribution of solute in the host lattice of concentrated KCl–KBr solid solutions with c?>?c _m.     

一种粒子谱仪用高均匀性高磁通密度永磁组件

研制的永磁组件采用主辅永磁体和匀场技术相结合的改进C型磁路结构,利用计算机仿真技术对组件磁路结构进行验证及优化。仿真分析及实验结果表明:采用这种磁路结构扩大了均匀区的范围,提高了磁场均匀性。按这种结构制造的永磁组件在20 mm气隙、中心平面200 mm120 mm均匀区内气隙磁通密度达到0.75 T,不均匀度为0.67%。另外,也对永磁组件在高低温下的磁性能进行了仿真计算,结果表明:在-55~70 ℃温度范围内均匀区的气隙磁通密度变化为4%左右。     

Texture, microstructure and magnetic properties of Fe-28Cr-15Co-3.5Mo permanent magnet

Crystallographic texture, microstructure and magnetic properties of Fe-28Cr-15Co-3.5Mo alloy were studied as a function of processing parameters. Texture studies revealed that thermo-magnetic aging leads to the development of ideal Goss type, {1 1 0} 〈0 0 1〉 and cube type {0 0 1} 〈0 1 0〉 textures. The orientation densities of these texture components become stronger after the step-aging treatments. Microstructural features show that improvement in magnetic properties were due to aligning and elongation of ferromagnetic Fe, Co-rich (α₁) particles in the preferred 〈1 0 0〉 directions. Magnetic analysis reveals that magnetic properties of the alloys are directionally dependent and influenced by the choice of thermo-magnetic treatment temperature or time. The maximum values of intrinsic coercive force, remanence and energy product, obtained in the textured magnetic alloy were 68.99 kA/m (867 Oe), 1.12 T (11.2 kG) and 43.2 kJ m³ (5.4 MG Oe), respectively.     

永磁同步电机的混沌分析及其电路实现

作为一个非线性动力学系统,在一定参数范围和外部输入下永磁同步电机可以呈现非常复杂的混沌运动或极限环,其混沌特性较为显著.在永磁同步电机的非线性数学模型基础上,分析其分叉图、Lyapunov指数图谱和平衡点性质等非线性运动特性,并通过数字仿真得到验证.最后基于该模型设计了相应的模拟电路,实验结果和数字仿真一致. 关键词： 永磁同步电机 混沌 分形分析 电路实现     

直驱式永磁同步风力发电机中混沌运动的滑模变结构控制

以直驱式永磁同步风力发电机（D-PMSG）作为研究对象,推导了其数学模型,论证了在某些参数及工作条件下会出现混沌运动,提出了D-PMSG混沌运动的滑模变结构控制方法,通过控制桨距角β来实现.针对风力机系统的非线性,参数变化等特性,根据风力机机理,基于一定假设得到风力机在某一工况点线性模型,进而提出滑模变结构控制方案,充分利用变结构控制对被控对象的模型误差、对象参数的变化以及外部干扰有极佳的不敏感性的优点.仿真结果表明所提出控制方案的有效性,控制响应速度快,控制鲁棒性好,能适用于系统具有不确定 关键词： 风力发电 直驱式永磁同步风力发电机组（D-PMSG） 混沌控制 滑模变结构控制     

磁性树脂基复合材料的研究进展

综合磁性树脂基复合材料的研究现状,着重介绍了磁性树脂基复合材料的三大类：粘结磁体、磁性高分子微球和磁性离子交换树脂的最新发展和研究状况。     

New efficient shortest path simplex algorithm: pseudo permanent labels instead of permanent labels

We introduce a new network simplex pivot rule for the shortest path simplex algorithm. This new pivot rule chooses a subset of non-basic arcs to simultaneously enter into the basis. We call this operation a multiple pivot. We show that a shortest path simplex algorithm with this pivot rule performs O(n) multiple pivots and runs in O(nm) time. Our pivot rule is based on the new concept of a pseudo permanently labeled node, and it can be adapted to design a new label-correcting algorithm that runs in O(nm). Moreover, this concept lets us introduce new rules to identify negative cycles. Finally, we compare the network simplex algorithm with multiple pivots with other previously proposed efficient network simplex algorithm in a computational experiment.     

基于多核最小二乘支持向量机的永磁同步电机混沌建模及其实时在线预测

提出了多核最小二乘支持向量机的永磁同步电机混沌系统建模方法. 通过不同核函数的线性加权组合构造新的等价核,降低建模精度对核函数及其参数选择的依赖性. 理论上给出多核最小二乘支持向量机回归参数和模型输出值的求解方法. 采用关联积分计算方法对永磁同步电机混沌系统进行相空间重构,以窗式移动的在线学习方式对重构后的永磁同步电机混沌序列进行一步和多步实时在线预测,并讨论了不同测量噪声对该方法的影响. 仿真结果表明,该方法能有效提高永磁同步电机混沌系统的建模精度,具有良好的抗噪能力. 关键词： 永磁同步电机 多核学习 最小二乘支持向量机 混沌预测