Self aggregation of binary mixtures of sodium dodecyl sulfate and polyoxyethylene alkyl ethers in aqueous solution

The mixed micelles of sodium dodecyl sulphate (SDS) with Brij35 and Brij 97 were studied separately by fluorescence measurement using pyrene as fluorescent probe. In the range of 0–1.0 mole fraction (X) of added SDS to Brij solutions, the cmc value of the mixed micelles varies from 0.085 to 8 mmol with Brij 35 and 0.04 to 8 mmol with Brij 97. The aggregation number also changes. A measure of the stability of mixed micelles is also presented. The interaction parameter ₁₂ and the chain–chain contribution parameter (B₁) are extracted from the analysis of the results. This parameter B₁ is related to the standard free energy change associated with the introduction of one ionic species into a nonionic micelle coupled with the release of one nonionic species from the micelle. The clouding behaviour of Brij 97 in the presence of SDS was investigated and the associated thermodynamic parameters of clouding were generated and discussed.     

反相离子对高效液相色谱法测定母粉及母液中的杀鼠新

用反相离子对高效液相色谱法测定了杀鼠新母粉及母液中有效成份含量。采用Partisil-10ODS色谱柱，以甲醇：离子对溶液＝80：20（体积比）为流动相，离子对溶液为0.005mol/L四丁基铵磷酸盐（pH为7.5)的缓冲溶液，测定波长285nm。方法在0.025-0.15g/L范围内有很好的线性关系。杀鼠新母粉和母液的相对标准偏差分别为1.24%、0.77%(n=7)，回收率分别为：母粉,97.7%-99.8%；母液，98.5%-100.4%。     

温度对贮氢合金MlNi3.75Co0.65Mn0.4Al0.2动力学性能的影响

在-20℃～85℃的范围内系统地研究了温度对贮氢合金MINi3.75Co0.65Mn0.4Al0.2动力学性能的影响.结果表明:该贮氢合金电极的电化学反应电阻Rt,欧姆内阻Ro,阴极极化过电位,阳极极化过电位,阳极极化过程中的电化学反应过电位ηa和浓差极化过电位ηa均随温度的升高而减小,该电极的交换电流密度i0,对称因子β和电极中氢的扩散系数D随温度的升高而增大.当放电电流密度较低时,电化学反应是整个电极过程的速度控制步骤;当放电电流密度较高时,氢的扩散是整个电极过程的速度控制步骤;在中等放电电流密度下,电极过程由电化学过程和氢的扩散过程混合控制.该电极中电化学反应过程和氢扩散过程的活化能分别为28.1 kJ·mol-1和19.9 kJ·mol-1.     

农药甲霜灵对映体的高效液相色谱分离及手性拆分热力学研究

以正己烷 异丙醇为流动相 ,在纤维素 三 (3 ,5 二甲基苯基氨基甲酸酯 ) (CDMPC)涂敷型手性固定相上 ,对农药甲霜灵外消旋体进行了拆分 ,考察了流动相组成、柱温等对甲霜灵对映体的保留和分离的影响 ;对甲霜灵R、S对映体与固定相之间的保留和分离的热力学机理进行了讨论     

Thermodynamic parameters of interaction of HC1 with alcohols in water Ⅲ.HCl-ethanol-water system at 278.15-318.15 K

Pt,H2(g,p0)HCl(mE)|AgCl-AgPt, H2(g, p0)|HCl(mE), EtOH(mN)|AgCl-Ag have been measured at 10 degree intervals from 278.15 to 318.15 K, where EtOH refers to ethanol, mE=0.005-0.1 mol.kg-1, mN=0.4-1.0 mol.kg-1. The salting constant kS of EtOH by HCl and the thermodynamic parameters of interaction, fEN(gEN> hEN, sEN] cP,EN)> of EtOH with HCI in water have been evaluated. It has been shown that kS>0, gEN>0,hEN>0, SEN>0 ,and cp,EN<0.The signs of these parameters and the temperature dependence of them have been discussed on the basis of structural interaction and the group additivity models.     

THE PARAMETER KERNELS FOR THE LINEAR INVERSION OF THE FREE OSCILLATION OF THE EARTH (Ⅰ)

In the linear inversion of the radial variation of the parameters of the Earth by usingthe observed frequencies of various normal modes of free oscillation of the earth, it is neces-sary to know the values of the kernels of the parameters ρ, μ and λ. This paper describesthe methods of the derivation of the formulas of these kernels. This is the first part of thepaper in which only the toroidal oscillations are considered. They are much simpler thanthose of the spheroidal ones, that we will consider in the second part of the paper. The data of the two types of oscillations are equally important in the solution of theinversion problem, and should be employed simultaneously, and we know that the toroidaloscillations are much simpler than the spheroidal ones, it seems wise to divide the whole programof the inversion problem into steps: first, by employing the toroidal data to correct the twoparameters ρ and μ in the mantle, then by using the spheroidal data to correct the remain-ing parameters, i.e. th     

The performance and application of a multidimensional system for gas chromatography

We have previously described [1] the design of a simple heart-cuttings device based on the Deans' principle of remote pressure switching [2]. Since that time, further work has been conducted to refine the design of the heart-cutting device and to develop complementary backflushing and cryofocusing units. This paper describes the results obtained from an intensive evaluation of the three modules in various combinations and considers parameters critical to the practical application of multidimensional gas chromatography (MDGC).     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。     

层状LiMnO2的固相合成及电化学性能

以Mn₂O₃和氢氧化锂为原料，通过焙烧合成出o-LiMnO₂。用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。通过对不同温度条件下烧结样品的晶胞参数、布拉格(110)晶面峰半高宽及电化学性能研究发现：600 ℃下合成样品的半高宽最大，堆垛层错率高，同时电化学性能也最好，首次放电容量达到156 mAh·g^-1，20次循环后仍保持在140 mAh·g^-1以上。中高温固相合成的o-LiMnO₂材料，在晶粒范围大小相近时，材料电化学性能与材料堆垛层错率相关。     

非晶高聚物对聚(ε-己内酯)在其与苯乙烯-丙烯腈共聚物相容共混物中球晶生长速率的影响

本文研究了聚(ε-己内酯)(PCL)在其与苯乙烯-丙烯腈共聚物(SAN)的相容共混物中球晶生长速率与共混组成和结晶温度的关系.发现聚己内酯的球晶生长速率随着SAN的含量增加而下降.由于PCL与SAN是相容共混物,因此在用二次成核动力学方程描述PCL球晶生长速率时,我们引进了相互作用参数X.结果由共混体系的结晶动力学方程计算到的X值与由平衡熔点下降方法计算到的X_(23)值是相同的;而PCL晶体的折叠表面自由能则随着SAN含量的增加而下降.这些结果说明非晶高聚物SAN有碍于PCL球晶的生长.