Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

纳米SrTiO3对高铁酸盐电化学性能影响研究

Two ferrates, K₂FeO₄ and BaFeO₄, had been prepared and characterized by XRD, IR and SEM. The electrochemical tests of the samples were carried out in the voltage range of 0.8～2.0 V and current density of 0.5～3.0 mA·cm^-2. The results indicated that performance of Zn-BaFeO₄ battery was superior to that of Zn-MnO₂ and Zn-K₂FeO₄ batteries. Nanometer SrTiO₃ prepared by Sol-gel methode with different ratio was added to the BaFeO₄ cathode in order to improve the discharge performance. The discharge capacity of the BaFeO₄ cathode was increased from 224 mAh·g^-1 to 246 mAh·g^-1 by addition of 5% nanometer SrTiO₃. The reason of enhancing BaFeO₄ electrochemical performance was discussed.     

无机胶体法制备Pt/C催化剂及其性能表征

采用无机胶体法制备用于质子交换膜燃料电池(PEMFC)的Pt/C催化剂。研究了影响PtO₂胶体生成和稳定性的因素(溶液的pH值、浓度和温度条件等)以及不同还原剂浓度对Pt/C催化剂性能的影响。透射电子显微镜测试结果表明，采用经优化的工艺条件所制备的Pt/C催化剂平均粒径为3 nm，且分散性好、粒度均匀。X-射线衍射分析表明，催化剂中Pt(111)晶面的相对含量较高，有利于加速氧还原反应。单体PEMFC的电压/电流密度曲线测试表明，所制备的Pt/C催化剂具有良好的电化学性能。     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

免疫亲和柱净化/柱前衍生化-高效液相色谱荧光检测法测定粮谷中的T-2毒素

建立了免疫亲和柱净化/柱前衍生化-高效液相色谱荧光检测器测定粮谷中T-2毒素含量的方法。样品经甲醇-水(体积比为80∶20)混合溶剂提取,通过免疫亲和柱(IAC)净化,以氰酸蒽(1-AN)为衍生化试剂、4-二甲基氨基吡啶(DMAP)为催化剂进行衍生,以ZORBAX Eclipse XDB-C18 柱为分离柱,乙腈-水(体积比为80∶20)为流动相进行高效液相色谱分离及荧光检测，荧光检测的激发波长为381 nm，发射波长为470 nm。T-2毒素的质量浓度为0.01~1.5 mg/L时与峰高呈良好的线性,相关系数为0.9985。在0.01~1.5 μg/g添加水平下，回收率为79.7%~94.5%,相对标准偏差小于7%；检出限（S/N＝3）为0.01 μg/g。该方法净化效果好,灵敏度高,操作简便快速。     

Quantitative determination of UV filters in sunscreen lotions using microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) has been applied to the separation of some UV filters (Eusolex 4360, Eusolex 6300, Eusolex OCR, Eusolex 2292, Eusolex 6007, Eusolex 9020, Eusolex HMS, Eusolex OS, and Eusolex 232) commonly used in sunscreen lotions. Use of a MEEKC buffer with a mixed surfactant system to stabilize the oil droplets and an organic modifier in the aqueous phase allowed separation of most of the selected analytes in a single run in a system fitted with a diode array detector recording three wavelengths (240 nm, 300 nm, and 380 nm) simultaneously. The microemulsion employed consisted of 2.25 g of SDS, 0.75 g of Brij 35, 6.6 g 1‐butanol, 0.8 g n‐octane, 17.5 g 2‐propanol, and 72.1 g of 10 mM borate buffer (pH 9.2). Detection limits from 0.65 to 6.0 μg/mL were obtained and the calibration plots were linear over at least one order of magnitude for all analytes. The developed method could be applied to the determination of UV filters in several sun protection products including lotions, milks, and oils. Comparison of the obtained data with those from an HPLC method described in the literature showed acceptable agreement.     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

超高效液相色谱-串联质谱法测定茶叶中游离氨基酸成分

建立了使用超高效液相色谱-串联质谱（UHPLC-MS/MS）高效、快速直接测定茶叶中游离氨基酸的方法。通过对质谱、色谱条件及氨基酸提取条件的优化，以含0.2%（体积分数）甲酸的5 mmol/L乙酸铵水溶液和甲醇为流动相进行梯度洗脱，在电喷雾离子（ESI）源正离子扫描模式下检测，通过UHPLC-MS/MS测定，共解析了茶叶中的20种氨基酸。结果表明，茶氨酸（Thea）、Arg、Asn和Asp在50~500 μg/L范围内线性关系良好，其他氨基酸在10~250 μg/L范围内线性关系良好，相关系数均大于0.99；加标回收率为92.3%~109.2%，相对标准偏差为2.00%~9.88%，检出限为0.001~0.011 mg/L，定量限为0.010~0.053 mg/L。该方法灵敏、准确，具有良好的重复性和稳定性，可有效检测出茶叶中的20种氨基酸及氨基类成分。     

手性高效液相色谱法测定1—（6‘—甲氧基萘）乙醇不对称氢酯基化反应

在自制的硅基纤维素－三（３，５－二甲基苯基氨基甲酸酯）高效液相色谱手性固定相上（ＨＰＬＣ－ＣＳＰ），优化了１－（６＇－甲氧基萘）乙醇氢酯基化反应产物－萘普生甲酯手性分离的条件，测定了相应的一系列不对称氢酯基化反应产物的对映体过剩值（ｅ．ｅ．值）。结果表明，在ＣＤＭＰＣ－ＣＳＰ手性柱上用ＨＰＬＣ测定此类不对称催化反应的光学产率，评价催化剂体系的手性选择是一种非常理想的方法。