Modeling and Simulation of Saturation Gain of IR Integrated Photonic Amplifiers

IR integrated photonic amplifiers at 1.55m operation will have good foreground in optical phasedarray radars for splitters and signal processing. The saturation gain characteristics of IR integrated photonic waveguide amplifiers (taken Er³⁺Yb³⁺ co-doped phosphate glass waveguide amplifiers as an example) are studied theoretically. For the homemade laser glass materials the calculated saturation intensities are 2.22kw /cm² for signal and 10.15kw/cm² for pump. The effects of absorption saturation of signal and pump lights on the gain of amplifiers are discussed.     

Investigations of the E-O behavior in the poled polymer waveguide

The electro-optic (E-O) properties of the slab polymer waveguide induced by electric poling have been studied experimentally. The thin film waveguide was prepared by a synthesized polymer polypelargonamide and poled by applying voltage between the electrodes. I–V curves and E-O characteristics of the polymer films were in-situ measured during poling. In order to evaluate the molecular dipole orientation under the poling field, the absorption spectra of this film was observed by FTIR. The E-O performance of the polymer slab film was also estimated by the Mach–Zehnder interferometer.     

Full-wave analysis of dielectric waveguides at a given frequency

New variational formulation to compute propagation constants is proposed. Based on it, vector finite element method is proved to exclude spurious modes provided finite elements possess discrete compactness property. Convergence analysis is conducted in the framework of collectively compact operators. Reported theoretical results apply to a wide class of vector finite elements including two families of Nedelec and their generalization, the -edge elements. Numerical experiments fully support theoretical estimates for convergence rates.

     

声波导中的局部正交变换

In this paper, a local orthogonal transformation is created to transform the Helmholtz waveguide with curved interface to the one with a flat interface within the two-layer medium, and the Helmholtz equation uxx uzz k^2(x,z)u=0 is transformed to Vxx αVzz βVz γV=0. Numerical results demonstrate that the transformation is more feasible. This transformation is particularly useful for the research on wave propagation in acoustic waveguide.     

An Optimum Sectional Waveguide Taper for Quasioptical Transmission Lines

The paper considers an optimum sectional waveguide taper (OSWT) which at a shortest length of the transition region provides nearly adiabatic propagation of the fundamental mode between circular, widely different in diameter quasioptical transmission lines of class hollow dielectric waveguide (HDW). Derived as a consequence of coaxial circular-horn sections, the OSWT offers all the advantages of a simple geometry and lends itself to simple fabrication techniques. The relationships among the critical geometrical parameters and the loss calculation formulae are presented. The comparison studies show that even at a few sections, the OSWT is almost as good in performance as the parabolic taper, but the OSWT is much better from a mechanical viewpoint. And compared to the ordinary linear taper, the OSWT allows essential cut in length and loss with the broadbandness kept. The HDW-based four-sectional OSWT has been fabricated and tested in a quite broad wave range 2,5-8 mm. The testing results lend a good support to the analytical formulae lying at the basis of the design software.     

Computation of the Reflection Coefficient of a Triangular Semiconductor Prism in a Rectangular Waveguide

In this paper we present a method to solve Maxwell's equations that enables to compute waveguide structure containing a semiconductor triangular prism. The numerical study has showed that the triangular prism in the waveguide has a wider frequency band in comparison with a square rod under equal conditions. The reflection coefficient dependencies on frequency, prism size and its permittivity have been computed. The algorithm and computer programme have been tested and compared with the numerical results and experimental data of the paper [1] with good agreement.     

极化子荧光及其断层扫描对Ti:LiNbO3光波导表征研究

小极化子(Nb⁴⁺_Li)荧光处于700—950 nm谱段，对不同化学还原程度同组分的纯铌酸锂晶体的研究表明荧光的强度反映了化学还原程度的强弱.从小极化子浅层能级出发，提出以“1中心3级态跃迁”来描述小极化子的受激荧光过程.钛扩散铌酸锂光波导(Ti：LiNbO₃)表面还原程度的均匀性可能在波导制造的热扩散过程中被破坏.在对铌酸锂波导表面、深部的扫描结果中，荧光的强度呈现出表面与深部、波导内与外的差异，表面的强度是深部的6—8倍.研究表明，利用非损伤性的极化子荧光谱，对加工过程热处理进行检控是非常有效的.同时，波导内与外的荧光强度差异间接反映了波导的横切面的外形.     

光纤微机电系统法布里-珀罗压力传感器的波分复用

提出了一种用阵列波导光栅复用光纤微机电系统法布里-珀罗压力传感器的方法,实现了法布里-珀罗压力传感器的准分布式测量。传感器基于法布里-珀罗腔干涉的原理,采用微机电系统技术加工制作,用双波长方法解调干涉信号,利用传感器对两个不同波长光的反射率的比值与压力的单值关系确定所施加压力的大小,用阵列波导光栅实现传感器复用。理论分析与实验验证了传感器解调和复用的基本原理。实验结果表明:在压力的线性测量范围(0~1.5 MPa)内,系统的灵敏度(相对反射率比值/压力)可达到0.02026 MPa-1,测量结果具有较好的线形性,相对反射率比值的标准偏差小于3×10-4。该系统可以补偿传感器光网中和波长无关的变动引起的误差,具有好的线性、灵敏度和精度,复用能力强且复用传感器间无串扰。     

Modal attenuation in metal-clad graded-index slab optical waveguides

The paper presents the influence of refractive profile shape on the distribution of modal attenuation in planar metal-clad optical waveguide structures. A calculation method has been presented in which we applied the Snyder–Love expression on modal attenuation coefficients and matrix method 4 × 4 for the analysis of planar waveguides. The obtained results are almost identical with the exact results for refractive profiles: the parabolic, exponential, Gaussian and linear ones. It has been demonstrated that the applied calculation method can be used in waveguides of any profiles of the refractive index.     

HL-2Aװ��1MW���ӻ���������ȴ���ϵͳ����

HL-2A装置1MW/68GHz/1s电子回旋共振加热传输系统有两条传输线，每条传输线包括波纹波导、换向波导和直流隔离器。HE11模式微波在波导中传输，微波损失小且模式纯度高。用激光校准及用热敏纸测量短脉冲微波模式分布的手段确保传输线的准直性。传输线的倾斜角度小于0.0054rad。