Dominant modes of submerged thin cylindrical shells

The relationship between the dominant mode of the submerged thin cylindrical shell and the flexural wave velocity is investigated. The natural frequency corresponding to the vibration mode is obtained as the solution of characteristic equation of thin cylindrical shell. However, it is difficult to estimate the dominant mode, especially if two or more vibration modes are involved. To estimate the dominant mode of a thin shell in vacuo, the concept of “modified bending stiffness” has been introduced. In this paper, the concept of modified bending stiffness is extended to estimate the dominant mode of a submerged thin cylindrical shell. The dominant mode of a submerged thin cylindrical shell is theoretically discriminated from the other mode based on the smallness of the modified bending stiffness of the submerged shell. The validity of our theory is confirmed by a good agreement between theoretical and experimental results on flexural wave velocity.     

宽带非均匀半径渐变TE0n-TE0(n+1)模式转换器的设计研究

基于耦合波理论,对两类半径渐变圆波导TE_0n-TE_0(n+1)模式转换器进行理论分析、数值计算和仿真模拟.均匀半径渐变波导高功率模式转换器,采用中心频率为17.14GHz、六周期TE₀₂-TE₀₃模式和中心频率为34.30GHz、六周期TE₀₁-TE₀₂模式两种设计参数.非均匀半径渐变波导高功率模式转换器,采用中心频率为34.30GHz、六周期TE 关键词： 模式转换器 耦合波理论 非均匀半径渐变 转换带宽     

Raman spectra of crystalline iron perchlorate hexahydrate

Raman studies of crystalline iron perchlorate hexahydrate (Fe(ClO₄)₂·6H₂O) in the region of lattice and anion internal modes were carried out in the temperature range 80–385 K. The temperature‐dependent Raman results are consistent with those from previous works, showing that two phase transitions occur around 336 and 245 K. The transition at 336 K may be considered as an order–disorder transformation, while the one at 245 K is associated with the configurational disorder of the tetrahedron of the perchlorate ions. Copyright © 2008 John Wiley & Sons, Ltd.     

白光干涉偏振模耦合分布式光纤传感器分析

分布式光纤传感器能够测量沿光纤长度上连续分布的外界量。用保偏光纤作为传感光纤的分布式光纤传感器,被测外界量引起保偏光纤中传播的两正交偏振模的相互耦合。用迈克尔逊干涉仪两臂光程差来补偿两个偏振模的光程差的方法探测传感信号。为了设计白光干涉偏振模耦合分布式传感器,根据统计光学原理分析了传感器的互相干特性。在此基础上分析了传感器的空间分辨力、光纤耦合点分辨力、最大传感光纤长度。波长1310nm、谱宽36nm的超辐射发光二极管(SLD)作光源．用色散参量为600ps／km,拍长3mm的保偏光纤的分布传感器空间分辨力和光纤耦合点分辨力分别为6cm和3mm。     

一种新颖的用于光腔模式及光束传输模拟的特征向量法

根据有限元法单元划分的思想，提出了一种新颖的模拟光腔模式及光束传输的特征向量法. 该方法的关键之处在于基于衍射积分理论构造了一种新的光束传输矩阵，通过求解特征矩阵方程可一次性得到谐振腔的一系列特征向量，每一列特征向量即代表了腔镜上光场的一个确定模式的振幅及相位分布. 并可采用该方法模拟光场传输到腔内或腔外任意地方的场分布. 该方法将传统方法中大量的迭代过程转化成为本征积分方程特征向量的求解过程，并与初值取值无关，且可一次性求得多个模式分布，从而可方便地分析谐振腔的模式鉴别能力. 特征向量法对圆形镜共焦 关键词： 谐振腔 特征向量法 模式分布     

强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.     

一维光子晶体微腔在硅基材料发光中的应用研究

硅基材料的高效发光对未来硅基光电子集成的发展极其关键,含微腔的一维光子晶体可以显著提高其发光强度、窄化其发光峰.介绍了几种硅基材料发光的一维光子晶体微腔结构,包括单缺陷模式的对称与非对称结构、多缺陷模结构及电注入结构.利用传输矩阵法计算其缺陷模透射谱,以间接分析其发光谱.     

光纤弯曲损耗特性的理论与实验研究

为了减小在长距离光纤通信中存在的弯曲损耗和利用光纤激光器中的弯曲损耗获得单模输出，利用速度法解释了光纤弯曲损耗机制，采用Marcuse理论研究了弯曲损耗随弯曲半径、波长和纤芯半径变化的关系。通过计算机仿真和实验得出弯曲损耗随弯曲半径的减小而增大，随波长的增大而增大，随纤芯半径的增大而增大，高阶模式的损耗大于低阶模式。利用这一结论就可以通过控制弯曲半径在临界半径以内来减小通信中的弯曲损耗，通过增大模场半径来实现光纤激光器中的单模输出。     

LD泵浦Nd：YAG激光器纵模特性及频率稳定性实验研究

摘要为了更好地研究LD泵浦Nd：YAG激光器的输出光束质量，利用共焦球面干涉仪设计了一套用于测量和分析该激光器纵模特性的简易装置，对该激光器的纵模进行了实验分析。在室温下测得纵模间隔为1.83GHz，纵模谱线宽度为113.83MHz。同时利用此装置，对该激光器的频率稳定性进行了分析，在120s取样时间内，测得频率稳定度为2.94×10^-4。     

Synchronization of different chaotic systems via active radial basis functions sliding mode controller

This paper presents a new method to synchronize different chaotic systems with disturbances via an active radial basis function （RBF） sliding controller. This method incorporates the advantages of active control, neural network and sliding mode control. The main part of the controller is given based on the output of the RBF neural networks and the weights of these single layer networks are tuned on-line based on the sliding mode reaching law. Only several radial basis functions are required for this controller which takes the sliding mode variable as the only input. The proposed controller can make the synchronization error converge to zero quickly and can overcome external disturbances. Analysis of the stability for the controller is carried out based on the Lyapunov stability theorem. Finally, five examples are given to illustrate the robustness and effectiveness of the proposed synchronization control strategy.