Possibility of measuring exchange force through force microscopy

This article describes the possibility of measuring exchange force through atomic force microscopy (AFM), based on the results of first-principles calculations for the exchange force between two magnetic Fe(001) films. We observed strong variation of the exchange force relative to the surface site. The magnitude of the force variation was larger than the force sensitivity of conventional AFM. These results suggest that a surface magnetic image with atomic resolution can be achieved by measuring the exchange force.     

全彩色LED显示屏的色度计算

全彩色ＬＥＤ显示屏可以用来显示电视画面。目前没有专门用于ＬＥＤ彩色大屏幕的图像源及其标准,所以都是将送给ＣＲＴ显像管的图形信号源送到ＬＥＤ彩色大屏幕进行显示。针对把送给ＣＲＴ的信号送到ＬＥＤ屏进行显示会引起彩色失真这种情况,本文给出ＬＥＤ大屏幕系统的色度公式,为准确控制ＬＥＤ管的发光亮度提供理论依据,并给出产例。     

中子引起单粒子翻转过程的Monte Carlo计算模拟

从中子与硅原子相互作用的物理机理出发,利用Monte Carlo方法编制了中子引起单粒子翻转的计算模拟程序,并对14 MeV中子环境下的16K位静态存储器硅片翻转过程中的物理量进行了计算,同时可为中子引起的单粒子翻转的研究提供截面和描述内部物理过程的参考数据。     

高压下FCC相金属氢结构稳定性和非谐效应的理论研究

利用第一性原理分子动力学方法研究金属氢体系的非简谐效应, 给出金属氢的声子谱, 讨论金属氢声子谱的温度效应。计算得到氢的同位素氕、氘和氚的FCC相在非零温下的声子谱, 不同温度下的声子谱对比发现零温下3.6 TPa为热力学稳定的临界压强点, 而有限温度下(100 K)临界压强点降到2.8 TPa, 非简谐效应显著地改变了体系的结构稳定性和声子振动性质。     

铁原子吸附联苯烯单层电子结构的第一性原理

联苯烯单层由碳原子的四元、六元和八元环组成,具有与石墨烯相似的单原子层结构.2021年5月,Science首次报道了该材料的实验合成,引起了科研工作者的极大关注.基于第一性原理的密度泛函方法,研究了铁原子在联苯烯单层的吸附构型并分析了其电子结构.结构优化、吸附能和分子动力学的计算表明,联苯烯单层的四元环空位是铁原子最稳定的吸附位点,吸附能可达1.56 eV.电子态密度计算表明铁3d电子与碳的2p电子有较强的轨道杂化,同时电荷转移计算显示铁原子向近邻碳原子转移的电荷约为0.73个电子,说明联苯烯单层与吸附的铁原子之间形成了稳定的化学键.另外,铁原子吸附于联苯烯单层后体系显磁性,铁原子上局域磁矩大小约为1.81μB,方向指向面外.因此,本文确认了联苯烯单层是比石墨烯更好的铁原子吸附载体且体系有磁性,这为研究吸附材料的电磁、输运、催化等特性提供了新的平台.     

碳纳米锥吸附Na的第一性原理计算

本文采用第一性原理计算结合从头算分子动力学的方法,研究了碳纳米锥(CNC)、B和N掺杂碳纳米锥(B-CNC和N-CNC)的稳定性,结果表明CNC、B-CNC和N-CNC均可以稳定存在.在此基础上分别研究了Na原子在CNC、B-CNC和N-CNC上的吸附行为.结果表明：1) Na原子在CNC五元碳环中心顶部位置的吸附最强,吸附能为-2.52 eV. CNC的能隙(Eg)为1.96 eV. 2) B和N掺杂CNC后,B-CNC和N-CNC的导电性均显著增强. 3)与CNC相比,Na原子在B-CNC上的吸附增强,而在N-CNC上的吸附则显著减弱.这表明B-CNC有望作为Na离子电池的负极材料.本文的研究结果对以CNC为负极材料的Na离子电池的研究提供了理论指导.     

胸腺嘧啶低能量VUV光解离路径的实验和理论研究

利用同步辐射真空紫外光电离质谱和理论计算研究了胸腺嘧啶的光解离反应路径, 通过改变光子能量得到不同的质谱信号, 光子能量在12.0 eV时主要的碎片有m/z=98 (C₄H₆N₂₄O⁺)、97 (C₄H₅N₂O⁺)、84 (C₃H₄N₂O⁺或C<     

光电子成像研究AgOCH3-和Ag-(CH3OH)x (x=1, 2)

用光电子成像技术和从头算法研究Ag^-(CH₃OH)_x (x=1, 2)和AgOCH₃^-. 从AgOCH₃^-振动分辨的光电子谱得 到AgOCH₃^-的绝热和垂直电离能分别为1.29(2)和1.34(2) eV. Ag^-(CH₃OH)_{1,2相似文献}   

Investigation on densification of Al2O3/B4C ceramic by ab initio calculation and experiment

Compared to experiment, the adsorption energies, bonding properties, and electronic structure of two different Al₂O₃/B₄C bridge sites with seven different Al₂O₃ surfaces are investigated by ab initio periodic density functional theory. The Al₂O₃/B₄C ceramic sintered in Ar is synthesized and measured by XRD and TEM. The calculated results reveal that the densification of O_bridge site of Al₂O₃/B₄C surface is better than that of Al_bridge. The Al₂O₃ (1 1 3)/B₄C with O_bridge is the most favorable and stable. The electronic structure shows that the electron hybridization exists between Al, O atoms and C, B atoms. The results indicate that the calculated results are in good agreement with the experiment.     

Study on the photocatalytic activity of K2La2Ti3O10 doped with zinc(Zn)

The layered perovskite type oxides, K₂La₂Ti₃O₁₀ and zinc(Zn)-doped K₂La₂Ti₃O₁₀ were prepared by sol-gel method and were characterized by power X-ray diffraction, UV-vis diffuse reflectance and X-ray photoelectron spectroscopy. The photocatalytic activity for water splitting of the catalyst powders was investigated with I⁻ as electron donor under ultraviolet and visible light irradiation respectively. The electronic structure of the powders has been analyzed by the first principles calculation, which reveals the photo responses in the visible region and the improvement of the photocatalytic activity of K₂La₂Ti₃O₁₀. Conclusions were made that zinc(Zn)-doped K₂La₂Ti₃O₁₀ exhibited higher reactivity for hydrogen production. When I⁻ was used as electron donor, the optimum doping concentration of zinc(Zn) was found to be 0.015:1 (n_Zn:n_Ti). The average hydrogen production rates were 126.6 μmol/(gcat h) under ultraviolet irradiation and 55.5 μmol/(gcat h) under visible light irradiation which were raised by 131% and 251% compared with undoped K₂La₂Ti₃O₁₀ photocatalyst, respectively.