A Practical See-Through Head Mounted Display Using a Holographic Optical Element

This paper describes a practical method for design and fabrication of holographic optical elements (HOEs) as off-axis imaging optics. The authors have designed and fabricated a compact glass-like and see-through display using HOE and a total internal reflection prism. Observers can see through the display because wavelength selectivity of the HOE provides high transparency. Wave front of the HOE is designed by commercial software, though the actual fabrication method is not provided. The authors propose a practical method to fabricate HOEs, which can be applied to a wide range of imaging optics.This paper was originally presented at the 2nd International Conference on Optical Design and Fabrication, ODF2000 which was held on November 15–17, 2000 at the International Conference Center, Tokyo, Waseda University, Japan.     

多孔介质中流动参数的三维显示

本文利用当今三维图形工作站提供的最新视觉化技术，动态显示多孔介质中流动的原理和方法，主要探讨三个问题：（１）改进参数场图像化的质量。力求以逼真的，生活化的三维图形显示参数场的分布；（２）尽可能加快动态显示速度，力求以更强的动感显示出流动过程中参数场的变化规律；（３）尽可能丰富图形编辑功能，提高人机联作交互性。     

Amperometric l-glutamate biosensor based on bacterial cell-surface displayed glutamate dehydrogenase

A novel l-glutamate biosensor was fabricated using bacteria surface-displayed glutamate dehydrogenase (Gldh-bacteria). Here the cofactor NADP⁺-specific dependent Gldh was expressed on the surface of Escherichia coli using N-terminal region of ice nucleation protein (INP) as the anchoring motif. The cell fractionation assay and SDS-PAGE analysis indicated that the majority of INP-Gldh fusion proteins were located on the surface of cells. The biosensor was fabricated by successively casting polyethyleneimine (PEI)-dispersed multi-walled carbon nanotubes (MWNTs), Gldh-bacteria and Nafion onto the glassy carbon electrode (Nafion/Gldh-bacteria/PEI-MWNTs/GCE). The MWNTs could not only significantly lower the oxidation overpotential towards NAPDH, which was the product of NADP⁺ involving in the oxidation of glutamate by Gldh, but also enhanced the current response. Under the optimized experimental conditions, the current–time curve of the Nafion/Gldh-bacteria/PEI-MWNTs/GCE was performed at +0.52 V (vs. SCE) by amperometry varying glutamate concentration. The current response was linear with glutamate concentration in two ranges (10 μM–1 mM and 2–10 mM). The low limit of detection was estimated to be 2 μM glutamate (S/N = 3). Moreover, the proposed biosensor is stable, specific, reproducible and simple, which can be applied to real samples detection.     

Orthogonal Surface Tags for Whole‐Cell Biocatalysis

We herein describe the engineering of E. coli strains that display orthogonal tags for immobilization on their surface and overexpress a functional heterologous “protein content” in their cytosol at the same time. Using the outer membrane protein Lpp‐ompA, cell‐surface display of the streptavidin‐binding peptide, the SpyTag/SpyCatcher system, or a HaloTag variant allowed us to generate bacterial strains that can selectively bind to solid substrates, as demonstrated with magnetic microbeads. The simultaneous cytosolic expression of functional content was demonstrated for fluorescent proteins or stereoselective ketoreductase enzymes. The latter strains gave high selectivities for specific immobilization onto complementary surfaces and also in the whole‐cell stereospecific transformation of a prochiral C_S‐symmetric nitrodiketone.     

基于ybar-y图的光学结构计算方法研究

本文基于y_bar-y图, 建立了计算光学系统一阶结构的数学模型, 并利用粒子群优化算法对模型进行了求解, 可以自动优化出各种光学系统的一阶结构. 编写了一套含图形用户界面(GUI)的软件, 将光学系统的基本设计要求进行处理后导入GUI, 求解之后利用商用光学设计软件如ZEMAX等, 将一阶结构转换为实际透镜结构, 然后经过透镜优化, 就可以设计出满足要求的光学系统. 根据本文所提出的光学结构计算方法, 首先进行了1300万像素手机摄像物镜的设计, 该物镜使用了4片非球面, 各项性能指标能够满足设计要求. 然后设计出一套头盔显示光学系统的目镜, 使用了两片非球面透镜实现了90°的视场角, 其他的性能指标也都满足要求. 两类光学系统的设计实例验证了该方法是一种可靠的光学系统一阶结构获取方法.     

基于CPCI总线的雷达数据采集与控制系统显控软件设计

CPCI总线作为PCI总线的加固版本,目前已成为计算机上流行的高速外设接口总线。在工业自动化领域,进行数据采集和控制基本上也都是通过这一成熟技术来实现的。本文简要介绍该测量雷达和数据采集与控制系统的基本结构,以及CPCI总线标准,重点分析显控软件的功能需求,采用自顶向下的设计,并在VC环境下基于MFC架构利用多线程和双缓存技术以及多种ActiveX控件进行显控软件设计。实现了对测量雷达的控制以及对雷达回波的原始数据的实时存取和绘制。     

One-dimensional integral imaging based on parallax barrier

One-dimensional integral imaging (1DII) which only has horizontal disparity is a practical solution of high resolution in the vertical direction, low-cost, easy-viewable three-dimensional (3D) display. A 1DII based on a parallax barrier is proposed in this paper. The 1DII consists of a parallax barrier and a display panel. The operation principle and parameter calculation of the 1DII are described in detail. Two prototypes of the proposed 1DII and conventional 1DII based on a lenticular lens array are developed. The proposed 1DII improves the quality of the 3D image and provides larger viewing angle than that based on a lenticular lens array, and it is simpler and has lower cost than that based on a lenticular lens array.     

Hybrid diffractive-refractive 67°-diagonal field of view optical see-through head-mounted display

Design of a wide-angle off-axis optical see-through head-mounted display (HMD) becomes a challenge since its weight and size are constrained by human factors. Diffractive optics has the potential to play a key role in several areas of head-mounted display. They can reduce size and weight while providing some unique functions that would be difficult to implement with conventional refractive optics. This paper presents a 67°-diagonal field of view, wide spectral band hybrid diffractive-refractive see-through head-mounted display (HMD) using off-axis optics. It possesses a 10 mm exit pupil and a 22 mm eye relief, and satisfies the requirements of human factors. The whole optical system is suitable for a 20 mm-diagonal color liquid crystal display (LCD) with XGA resolution.     

高彩模式下的显示特技和兼容性技术

从显示的基本原理出发，对高彩模式下的显示特技和兼容性问题作了讨论，提出了显卡识别、虚拟显卡的实施方法，很好的解决了软件的兼容性问题，同时也大大提高了DOS环境下的图形界面的质量.