Synthesis of 1-O-R-5-deoxy-β-D-ribofuranosides with (CH3)2As and (CH3)2AsO as substituents at the 5-position and a methyl or 2′,3′-dihydroxypropyl group as the aglycone in the 1-position

Six arsenic-containing β-D -ribofuranosides, including the naturally occurring (2′R)-dimethyl[1-O-(2′,3′-dihydroxypropyl)-5-deoxy-β-D -ribofuranos-5-yl]arsine oxide, were prepared in multi-step reactions from D -ribose and tetramethyldiarsine. The synthetic procedure uses the early substitution of the hydroxy group with bromine at C5, subsequent attachment of a chiral three-carbon aglycone at C1, and final delivery of arsenic at C5. The synthesis provides a viable route for the preparation of multigram quantities of the natural product.     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

Arsenic biomethylation by the microorganism apiotrichum humicola in the presence of l-methionine-methyl-d3

The microorganism Apiotrichum humicola (previously known as Candida humicola) grown in the presence of either arsenate, arsenite, methylarsonic acid or dimethylarsinic acid, produces arsenic-containing metabolites in the growth medium. When L-methionine-methyl-d₃ is added to the cultures, the CD₃ label is incorporated intact into the metabolites to a considerable extent to form deuterated dimethylarsenic and trimethyl-arsenic species, indicating that S-adenosylmethionine, or some related sulphonium compound, is involved in the biological methylation. Conclusive evidence of CD₃ incorporation in the arsenicals found in the growth medium was provided by using a specially developed hydride generation-gas chromatography-mass spectrometry system (HG–GC–MS).     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Sn/Al2O3催化剂结构与选择性催化还原NO性能

以不同沉淀剂和铝盐与SnCl4共沉淀制备了Sn/Al2O3催化剂.考察了催化剂在富氧条件下催化丙烯选择性还原NO的性能,借助于X射线衍射(XRD)、扫描电镜(SEM)、N2吸附-脱附、吡啶吸附红外光谱(Py-IR)和程序升温还原(TPR)等方法研究了催化剂性能与结构的关系.发现以NH3.H2O和NH4HCO3为沉淀剂、NH4Al(SO4)2为铝盐制备的Sn/Al2O3催化剂催化活性最高,NO转化率达90.9%,最佳催化活性温度为350℃.该催化剂的比表面积为254 m2/g,孔体积为0.878 cm3/g,孔径分布曲线在3~8 nm出现双峰,Sn物种主要以晶态SnO2存在,且表面Lewis酸酸量增加.     

纳米晶型MnCo2O4的微波加热法制备及其电催化性能

以Co和Mn的醋酸盐为原料,采用共沉淀法制得草酸盐前驱物,加入一定量微波吸波剂乙炔黑后,用微波进行热处理制得复合氧化物MnCo2O4.X射线衍射和扫描电镜结果表明,产物为纳米晶型,结晶良好,纯度较高,粒径为10~20nm且分布均匀.在室温下、空气气氛中,以6mol/L的KOH溶液为电解液测试了由MnCo2O4制备的空气扩散电极对氧还原反应的催化效果.极化曲线显示,在-0.2V(vsHg/HgO)电位下,氧还原反应电流密度达96mA/cm2.为显示微波加热法的优越性,用马弗炉煅烧制备了MnCo2O4,并对两种热处理方法所得产物的物化性能进行了比较.     

BaF2/La2O3催化剂上甲烷氧化偶联反应活性氧物种的原位红外光谱

用原位红外光谱研究了BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.结果表明,催化剂经O2预吸附后,在1 108~1 118 cm-1处出现超氧物种O2-的O-O键伸缩振动峰.经18O2同位素交换实验后,原1 108~1 118 cm-1处谱峰的强度减弱,同时在1 086和1 051 cm-1处出现(O18O)-物种和18O2-物种的吸收峰.同位素交换实验进一步确证了1 108~1 118cm-1处谱峰确为O2-物种的吸收峰.在700℃下,O2-物种能够活化CH4生成C2H4,而且O2-物种的消耗量和C2H4的生成量呈很好的消长对应关系.超氧物种O2-是BaF2/La2O3催化剂上甲烷氧化偶联反应的活性氧物种.     

氧化镓纳米材料的制备及其在光电探测方面的应用研究进展

近年来,半导体的纳米材料凭借其奇特的介观物理特性,成为当前研究的热点,特别是纳米金属氧化物。氧化镓纳米材料具备优异的光电、气敏、耐压且低损耗等特性,为材料学、电子学和化学等多个研究领域带来了新的机遇。本文概述了氧化镓纳米结构的制备方法,并展望了其在光电探测方面的应用。     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况,从而影响电化学性能,对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响,揭示其潜在的风险,我们建立了两个基于有限元法的仿真模型,对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上,首先建立了具有真实燃料电池翘曲特性的几何模型,分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中,模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度,分析了电池与盖板的接触对放电过程的影响．结果表明,燃料电池的凹陷面较难达到满意的接触状态,需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化,产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性,为今后的优化工作奠定了基础．     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。