亲水单分散聚合物基质阳离子色谱柱的制备及其应用

以自制5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯微球为基质,合成一种新型弱酸性阳离子色谱填料.选用甲烷磺酸作淋洗液,在流速为1.0 mL/min时,对6种无机阳离子(Li+, Na+, NH+4, K+, Mg2+, Ca2+)和有机胺进行了良好分离.考察了淋洗液种类、浓度以及流速对6种无机阳离子分离的影响,选择了合适的色谱分离条件.测得6种离子在一定浓度范围内具有良好的线性关系和低的检出限.将其用于决明茶中阳离子的分析,4种离子在20 min内完全分离,各离子标准加入回收率在96%～107%之间.此色谱柱的分离效果与Dionex IonPacCS12A商品柱接近,但分析时间缩短了44 min.     

Effect of stoichiometric ratio of organic fuel to oxidizer on performance of La0.8Sr0.2CoO3 catalysts for CH4 combustion

Perovskite-type La_0.8Sr_0.2CoO₃ mixed oxides were prepared by d,l-alanine solution combustion synthesis and used successfully in CH₄ combustion as catalysts. These samples were characterized by means of XRD, FTIR, BET, and H₂-TPR methods. The effects of stoichiometric ratio (φ) of organic fuel to oxidizer on the structure and catalytic activities of the catalysts were studied. The results indicate that all La_0.8Sr_0.2CoO₃ mixed oxides with different φ have perovskite structures. Their structures and catalytic activities vary along with the change of φ. The catalytic activity of La_0.8Sr_0.2CoO₃ mixed oxide with φ = 1.52 is the best among all the samples, whose T ₅₀ and T ₁₀₀ (the temperatures of methane conversions reaching 50 and 100%, respectively) are respectively 470 °C and 550 °C, which can be explained in terms of the smaller of average crystal size, higher specific surface area, bigger lattice distortion, lower activation energy, and higher mobility of chemically adsorbed oxygen on the surface and vacancy of the catalysts.     

两个修正的分子连接性指数用于有机物反磁磁化率的改进QSPR研究

为了预测有机物的摩尔反磁磁化率,基于分子图的连接矩阵和可变的原子价连接性指数δi’提出了一种可变的分子连接性指数mχ’ 及其逆指数mχ”。包含在δi’、 mχ’ 和mχ”定义式中的三个可变参数x、 a和y的最佳值可通过优化方法得到。当x=2.9、a=1.10、y=0.36时, 通过最佳子变量集合法可以构建一个良好的5参数模型。对721个有机物（训练集）,该模型的相关系数r、标准偏差s和平均绝对偏差分别是0.9930、4.96 cgs和3.74cgs。交叉验证说明,从统计学角度该模型具有良好的稳定性。另外该模型对另外360个有机物（测试集）摩尔反磁磁化率预测结果的平均绝对偏差为4.37cgs。结果表明本文的方法在预测有机物摩尔反磁磁化率方面比文献方法更有效。多元线性方法能得到比较理想的预测有机物摩尔反磁磁化率的模型。     

有机硼酸类催化剂在有机合成中的应用

综述了有机硼酸类作为催化剂应用于有机合成反应中的最新研究进展, 重点介绍了所发现的各种有机硼酸催化剂在缩合反应、羧酸还原反应、Diels-Alder反应中的催化活性以及反应机理. 硼酸催化剂因具有催化效率高、反应条件温和、可重复使用等优点, 必将在有机合成催化领域中得到更广泛的应用.     

新型导电陶瓷Sm0.9Sr0.1Al0.5Mn0.5O3-δ的制备及其电性能研究

采用有机凝胶法结合固相烧结技术制备了Sm0.9Sr0.1Al0.5Mn0.5O3－δ (SSAM9155)新型导电陶瓷. 通过TG/DTA, FTIR, XRD, SEM和直流四引线法系统研究了凝胶前驱体的热分解及其相转化过程和烧结体的结构、相稳定性、微观形貌、电导率以及电输运机制. 结果表明, 凝胶前驱体在900 ℃焙烧5 h可以形成完全晶化的四方钙钛矿相纳米粉体; 高温烧结制得的SSAM9155陶瓷的电导率取决于p型电导, 电导率随温度的升高而增大, 导电行为符合p型小极化子跳跃机制; 随烧结温度的升高或保温时间的延长, SSAM9155陶瓷的电导率和相对密度都先增大后减小, 1600 ℃烧结10 h制得的SSAM9155陶瓷具有最高的电导率和相对密度(98%), 该样品在空气和氢气气氛中850 ℃时的电导率分别为8.21和1.26 S•cm－1, 表观活化能分别为0.265和0.465 eV. 具有较高电导率的Sr, Mn掺杂的SmAlO3导电陶瓷有望成为一种新型的固体氧化物燃料电池(SOFC)阳极材料.     

钴配合物[Co_2(H_2O)_8(C_(10)H_8N_2)_2]·(HO_3PCH_2CH_2SO_3)(SO_4)(H_2O)_4的合成与晶体结构研究

用硫酸钴、4,4'-联吡啶和2-磺酸基乙基膦酸合成了一个新颖的钴化合物:[Co_2(H_2O)_8(C_(10)H_8N_2)_2]·(HO_3PCH_2CH_2SO_3)(SO_4)(H_2O)_4,并对其进行了红外.元素分析、热重测试,通过单晶衍射仪测定了其晶体结构.结果表明,配合物属单斜晶系C2/c空间群,分子式为C_(22)H_(45)Co_2N_4O_(22)PS_2,分子量为930.57,晶胞参数为a=19.8456(18),b=11.2957(10),c=34.719(3)(A),β=106.095(3)°,晶胞体积为7477.9(12)(A)~3,Z=8,Dc=1.653 g/cm~3,F(000)=3856,μ=1.131 mm~(-1),最终残差因子R_1=0.0726,wR_2= 0.1719(相对于5612个I>2σ(I)的可观测衍射点).在这个化合物中,二齿配体4,4'-联吡啶把Co(II)桥连成[Co(4,4'-bipy)]~(2+)链.化合物中的[Co(4,4'-bipy)]~(2+)链有三个不同的朝向.2-磺酸基乙基膦酸没有参与配位而是做为一个有机模板剂填充在[Co(4,4'-bipy)]~(2+)链形成的空隙中.     

含有噻唑生色团的Y-型有机分子的二阶非线性光学性质

采用密度泛函理论(DFT)B3LYP/6-31G*方法优化了一系列含有噻唑生色团的Y-型有机杂环分子的几何构型, 在此基础上结合有限场(FF)方法和含时密度泛函理论(TD-DFT)对分子的非线性光学(NLO)活性和电子光谱进行计算分析. 结果表明, 这些分子具有A-π-D-π-A(A: 受体, D: 给体)结构, 分子基态偶极矩、极化率和二阶NLO系数(β)随支链共轭桥的增长及生色团共轭效应的增大而增大. 同时, 该系列有机杂环分子的二阶极化率总的有效值(βtot)与其前线分子轨道能级相关, 分子的前线分子轨道能级差越小, βtot值越大.     

反相液相色谱中离子抑制剂的有机调节剂作用

系统地研究了在反相液相色谱（RPLC）流动相中作为离子抑制剂的酸、碱及缓冲溶液对中性化合物保留行为的影响,着重探讨了有机酸、有机碱离子抑制剂的有机调节剂作用,定量地考察了甲醇和乙腈、甲醇和乙酸、甲醇和三乙胺、乙腈和乙酸、乙腈和三乙胺在十八烷基硅烷键合相上洗脱强度之间的关系,为RPLC中有机调节剂的洗脱强度排序提供一种评判方法．另外,讨论了乙酸和三乙胺作为有机调节剂时不同的作用机理．本实验结果对于RPLC分离方法的快速建立和准确优化都具有一定的借鉴意义．     

Synthesis and photochromic properties of WO_3 powder induced by oxalic acid

Tungsten trioxide powder with the novel morphology was prepared via the hydrothermal method with oxalic acid as the organic inducer, the structure and shape of which were detected by X-ray diffraction (XRD), scanning electron microscopy (SEM) and BET. Furthermore, photochromic properties of the as-prepared powder samples were tested by an ultraviolet-visible spectrophotometer combined with a color difference meter. The corresponding results indicated that the induced product was still hexagonal WO3, made up...     

Carbazole-oxadiazole containing polyurethanes as phosphorescent host for organic light emitting diodes

New types of polyurethanes (PUs) were prepared from condensation polymerization of isophorone diisocyanate (IPDI) with various combination of 9-butyl-3,6-bis(4-hydroxyphenyl)carbazole (Cz) and 2,5-bis(4-hydroxyphenyl)-1,3,4-oxadiazole (OXD), and end-capped with 4-tert-butyl phenol. The Cz-OXD PUs can also be used as host for phosphorescent dye. Red EL emission was obtained when Ir(btp)₂(acac) or Ir(2-phq)₂(acac) was used as the phosphorescent dyes in Cz-OXD (3:1) PU. Maximum brightness of 394 cd/m² and EL efficiency of 1 cd/A were achieved for the Ir(2-phq)₂(acac) base device. In addition, white light PLED was demonstrated when co-dopant of Ir(btp)₂(acac) and Firpic were used.