Chemical Composition and In Vitro Antioxidant Activity of Sida rhombifolia L. Volatile Organic Compounds

In the current study, the phytochemical constituents of volatile organic compounds (VOCs) obtained from Sida rhombifolia L. were identified by GC-FID and GC-MS analysis. A total of 73 volatile organic compounds were identified. The major components of S. rhombifolia VOCs were identified as palmitic acid (21.56%), phytol (7.02%), 6,10,14-trimethyl-2-pentadecanone (6.30%), oleic acid (5.48%), 2-pentyl-furan (5.23%), and linoleic acid (3.21%). The VOCs are rich in fatty acids (32.50%), olefine aldehyde (9.59%), ketone (9.41%), enol (9.02%), aldehyde (8.63%), and ketene (6.41%). The antioxidant capacity of S. rhombifolia VOCs was determined by 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH), 2,2-azinobis-(3-ethylbenzothiazolin-6-sulfonic acid) diammonium salt (ABTS), and ferric reducing/antioxidant power (FRAP) methods with butylated hydroxytoluene (BHT) and Trolox as standard. The VOCs showed dose-dependent antioxidant activity with IC50 (50% inhibitory concentration) values of 5.48 ± 0.024 and 1.47 ± 0.012 mg/mL for DPPH and ABTS assays, respectively. FRAP antioxidant capacity was 83.10 ± 1.66 mM/g. The results show that the VOCs distilled from S. rhombifolia have a moderate antioxidant property that can be utilized as a natural botanical supplement or an antioxidant.     

Simultaneous Removal of Polymers with Different Ionic Character from Their Mixed Solutions Using Herb-Based Biochars and Activated Carbons

Nettle and the sage herbs were used to obtain carbonaceous adsorbents. For the biochar preparation the precursors were dried and subjected to conventional pyrolysis. Activated carbons were obtained during precursor impregnation with phosphoric(V) acid and multistep pyrolysis. The textural parameters and acidic-basic properties of the obtained adsorbents were studied. The activated carbons prepared from the above herbs were characterized by the largely developed specific surface area. The obtained carbonaceous adsorbents were used for polymer removal from aqueous solution. Poly(acrylic acid) (PAA) and polyethylenimine (PEI) were chosen, due to their frequent presence in wastewater resulting from their extensive usage in many industrial fields. The influence of polymers on the electrokinetic properties of activated carbon were considered. PAA adsorption caused a decrease in the zeta potential and the surface charge density, whereas PEI increased these values. The activated carbons and biochars were used as polymer adsorbents from their single and binary solutions. Both polymers showed the greatest adsorption at pH 3. Poly (acrylic acid) had no significant effect on the polyethylenimine adsorbed amount, whereas PEI presence decreased the amount of PAA adsorption. Both polymers could be successfully desorbed from the activated carbons and biochar surfaces. The presented studies are innovatory and greatly required for the development of new environment protection procedures.     

Identification of Heavy Metals and Organic Micropollutants in Drinking Water Sources in Typical Villages and Towns in Northeast China

This study identified and detected the existence of major pollutants in northeast China. As an alpine region and an agricultural base, this region has representative significance in pollution research. We selected 56 samples from drinking water sources of typical villages and towns, focusing on the analysis of heavy metals and organic micropollutants in northeast China. The analysis results showed that Fe and Mn were the main metal elements exceeding the standard. The exceeding rates were 17.9% and 19.6%. Experiments showed that there were 19 kinds of pesticides, 6 kinds of OPEs, 2 kinds of PAEs, 22 kinds of PPCPs. The detection rate of these 49 kinds of organic micro-pollutants were 1.79~82.14%. The characteristics of organic pollution were extensive and varied. Many underground water samples had high level of micropollutants. The water quality parameters of drinking water sources in villages and towns showed close relation to local geological conditions and agricultural activities. Actions must be taken to control these parameters from the source of pollution.     

Variable Dimensionality of Europium(III) and Terbium(III) Coordination Compounds with a Flexible Hexacarboxylate Ligand

A reaction between 4,4′,4″-(benzene-1,3,5-triyltris(oxy))triphthalic acid (H₆L) and lanthanide(III) nitrates (Ln = Eu³⁺, Tb³⁺) in water under the same conditions gave a molecular coordination compound [Tb(H_4.5L)₂(H₂O)₅]∙6H₂O in the case of terbium(III) and a one-dimensional linear coordination polymer {[Eu₂(H₃L)₂(H₂O)₆]∙8H₂O}_n in the case of europium(III). The crystal structures of both compounds were established by single-crystal X-ray diffraction, and they were further characterized by powder X-ray diffraction, thermogravimetric analysis and infrared spectroscopy. The compounds demonstrated characteristic lanthanide-centered photoluminescence. The lanthanide-dependent dimensionality of the synthesized compounds, which are the first examples of the coordination compounds of hexacarboxylic acid H₆L demonstrates its potential as a linker for new coordination polymers.     

Photoelectron Properties and Organic Molecules Photodegradation Activity of Titania Nanotubes with CuxO Nanoparticles Heat Treated in Air and Argon

Titania is very famous photocatalyst for decomposition of organic pollutants. Its photocatalytic properties significantly depend on the morphology and chemical composition of the samples. Herein, the TiO₂ nanotubes/Cu_xO nanoheterostructures have been synthesized and the effect of heat treatment performed in molecular atmospheres of air and argon on their photoelectrochemical and photocatalytic properties has been studied. The prepared samples have a higher reaction rate constant compared to TiO₂ nanotubes in the decomposition reaction of methylene blue molecules. It is established that in argon treated nanoheterostructures, the copper oxide is present in two phases, CuO and Cu₂O, while in air treated ones there is only CuO. In the TiO₂ nanotubes/Cu_xO samples, Cu²⁺ ions and molecular O₂⁻ radicals were detected while in TiO₂ nanotubes only carbon dangling bond defects are present. The dynamics of O₂⁻ radicals under illumination are discussed. It was shown that the TiO₂ nanotubes do not exhibit photocatalytic activity under visible light. The mechanism of the photocatalytic reaction on the surface of the TiO₂ nanotubes/Cu_xO samples was proposed. It is assumed that a photocatalytic decomposition of organic molecules under visible light at the surface of the nanoheterostructures under investigation is realized mainly by the reaction of these molecules with photogenerated O₂⁻ radicals. The results obtained are completely original and indicate the high promise of the prepared photocatalysts.     

Optical Anisotropy of Porphyrin Nanocrystals Modified by the Electrochemical Dissolution

Reflectance anisotropy spectroscopy (RAS) coupled to an electrochemical cell represents a powerful tool to correlate changes in the surface optical anisotropy to changes in the electrochemical currents related to electrochemical reactions. The high sensitivity of RAS in the range of the absorption bands of organic systems, such as porphyrins, allows us to directly correlate the variations of the optical anisotropy signal to modifications in the solid-state aggregation of the porphyrin molecules. By combining in situ RAS to electrochemical techniques, we studied the case of vacuum-deposited porphyrin nanocrystals, which have been recently observed dissolving through electrochemical oxidation in diluted sulfuric acid. Specifically, we could identify the first stages of the morphological modifications of the nanocrystals, which we could attribute to the single-electron transfers involved in the oxidation reaction; in this sense, the simultaneous variation of the optical anisotropy with the electron transfer acts as a precursor of the dissolution process of porphyrin nanocrystals.     

Behavior of PNIPAM Microgels in Different Organic Solvents

In this research, we studied, in detail, the behavior of common PNIPAM microgels, obtained through surfactant-free precipitation polymerization, in a number of organic solvents. We showed that many of the selected solvents serve as good solvents for the PNIPAM microgels and that the size and architecture of the microgels depend on the solvent chosen. Expanding the range of solvents used for PNIPAM microgel incubation greatly enhances the possible routes for microparticle functionalization and modification, as well as the encapsulation of water-insoluble species. In this demonstration, we successfully encapsulated water-insoluble Sudan III dye in PNIPAM microgels and prepared the aqueous dispersions of such composite-colored microparticles.     

Comparative Modelling of Organic Anion Transporting Polypeptides: Structural Insights and Comparison of Binding Modes

To better understand the functionality of organic anion transporting polypeptides (OATPs) and to design new ligands, reliable structural data of each OATP is needed. In this work, we used a combination of homology model with molecular dynamics simulations to generate a comprehensive structural dataset, that encompasses a diverse set of OATPs but also their relevant conformations. Our OATP models share a conserved transmembrane helix folding harbouring a druggable binding pocket in the shape of an inner pore. Our simulations suggest that the conserved salt bridges at the extracellular region between residues on TM1 and TM7 might influence the entrance of substrates. Interactions between residues on TM1 and TM4 within OATP1 family shown their importance in transport of substrates. Additionally, in transmembrane (TM) 1/2, a known conserved element, interact with two identified motifs in the TM7 and TM11. Our simulations suggest that TM1/2-TM7 interaction influence the inner pocket accessibility, while TM1/2-TM11 salt bridges control the substrate binding stability.     

Synthesis and the Crystal Structure of a New Chiral 1D Metal–Organic Coordination Polymer Based on L-Prolineamide-Substituted Diarylacetylenedicarboxylic Acid Derivative

The new homochiral 1D metal–organic coordination polymer [Cu₂(EDPB)•H₂O]_n was synthesized starting from the original 3,3′-ethyne-1,2-diylbis[6-(L-prolylamino)benzoic acid] (H₄EDPB). The unique crystal structure of the new compound was established by powder X-ray diffraction. The [Cu₂(EDPB)•H₂O]_n system shows catalytic activity and enantioselectivity in a Henry reaction of p-nitrobenzaldehyde with nitromethane.     

A Combined Experimental and Computational Study on the Adsorption Sites of Zinc-Based MOFs for Efficient Ammonia Capture

Ammonia (NH₃) is a common pollutant mostly derived from pig manure composting under humid conditions, and it is absolutely necessary to develop materials for ammonia removal with high stability and efficiency. To this end, metal–organic frameworks (MOFs) have received special attention because of their high selectivity of harmful gases in the air, resulting from their large surface area and high density of active sites, which can be tailored by appropriate modifications. Herein, two synthetic metal–organic frameworks (MOFs), 2-methylimidazole zinc salt (ZIF-8) and zinc-trimesic acid (ZnBTC), were selected for ammonia removal under humid conditions during composting. The two MOFs, with different organic linkers, exhibit fairly distinctive ammonia absorption behaviors under the same conditions. For the ZnBTC framework, the ammonia intake is 11.37 mmol/g at 298 K, nine times higher than that of the ZIF-8 framework (1.26 mmol/g). In combination with theoretical calculations, powder XRD patterns, FTIR, and BET surface area tests were conducted to reveal the absorption mechanisms of ammonia for the two materials. The adsorption of ammonia on the ZnBTC framework can be attributed to both physical and chemical adsorption. A strong coordination interaction exists between the nitrogen atom from the ammonia molecule and the zinc atom in the ZnBTC framework. In contrast, the absorption of ammonia in the ZIF-8 framework is mainly physical. The weak interaction between the ammonia molecule and the ZIF-8 framework mainly results from the inherent severely steric hindrance, which is related to the coordination mode of the imidazole ligands and the zinc atom of this framework. Therefore, this study provides a method for designing promising MOFs with appropriate organic linkers for the selective capture of ammonia during manure composting.