Pure Organic Phase Phenol Biosensor Based on Tyrosinase Entrapped in a Vapor Deposited Titania Sol‐Gel Membrane

A novel amperometric biosensor was constructed for the determination of phenols in pure organic phase. This biosensor was fabricated by immobilizing tyrosinase in a titania sol‐gel membrane which was obtained with a vapor deposition method. This method was facile and avoided the calcination step needed in conventional titania sol‐gel process. The titania sol‐gel membrane could effectively retain the essential water layer around the enzyme molecule needed for maintaining its activity in organic phase. The experimental parameters such as solvent and operating potential were optimized. At ?100 mV this biosensor showed a good amperometric response to phenols in pure chloroform without any mediator and rehydration of the enzyme. For catechol determination the sensor exhibited a fast response of less than 5 seconds. The sensitivity of different phenols was as follows: catechol > phenol > p‐cresol. Additionally, the apparent Michaelis‐Menten constants of the encapsulated tyrosinase to catechol, phenol and p‐cresol were found to be 0.15±0.003, 0.17±0.008 and 0.21±0.004 mM, respectively. The biosensor had also good reproducibility and stability. This work provided a promising platform for the construction of pure organic phase biosensors and the determination of substrates with poor water solubility.     

Mercury(II) complex with terpyridine: structure of the 2∶1 solvate of [Hg(terpy)2](CF3SO3)2 with acetone

[Hg(terpy)₂](CF₃SO₃)₂·0.5(CH₃)₂CO crystallizes in the triclinic space group witha=14.631(6),b=15.258(4),c=18.785(7) Å, =69.66(2), =70.72(1), =88.55(1)°. The crystal structure consists of two independent [Hg(terpy)₂]²⁺ cations, four trifluoromethanesulfonate anions and an acetone molecule in the asymmetric unit. Each mercury atom is coordinated by two tridentate terpyridine ligands forming an irregular six-coordination polyhedron. The Hg–N bond lengths range from 2.27(2) to 2.53(2) Å.     

STUDY ON THE DUCTILE DEFORMATION DOMAIN OF THE SIMPLE SHEAR IN ROCKS——TAKING BRITTLE FAULTS OF THE COVERING STRATA IN THE SOUTHERN JIANGSU AREA AS AN EXAMPLE

A study on the ductile deformation domain of the brittle fault in the shallow level ofthe crust is a new probe field for the modern structural geology. Taking the southern Jiang-su Province area as an example the orientation measurement of quartz crystals, the com-positional texture observation of three pressure sensitive minerals and the rheological param-eter determination of dislocation densities, etc. have been demonstrated and analysed basedon typical samples in the present paper. In addition, their generation mechanisms arealso discussed from the cataclastic rheology, the dynamic differentiation and the simpleshearing, specially, from the Ode strength theory. Finally, a generative relationship betweenthe ductile deformation domain of the brittle fault system, in the regional layer--slip andthe formation of the stratabound ore deposit is shown as well.     

Darstellung und Kristallstruktur von LnAl3Br12 (Ln = La,Ce, Pr,Nd, Sm,Gd) und thermischer Abbau zu LnBr3

Preparation and Crystal Structure of LnAl₃Br₁₂ (Ln = La, Ce, Pr, Nd, Sm, Gd) and Thermal Decomposition to LnBr₃ LnAl₃Br₁₂ (Ln = La, Ce, Pr, Nd, Sm, Gd) was prepared in crystalline form for the first time. The crystal structures of LaAl₃Br₁₂, PrAl₃Br₁₂, and NdAl₃Br₁₂ were determined on single crystals by X-ray methods. The isotypic compounds crystallize with trigonal symmetry, space group P 3₁12, Z = 3. A structural comparison to lanthanoide chloroaluminates of equal composition is given and thermal decomposition of LnAl₃Br₁₂ (Ln = Nd) to the corresponding lanthanoide tribromide is described.     

Solid-phase synthesis of liquid crystalline isoxazole library

Combinatorial library of isoxazoles was prepared by 1,3-dipolar cycloaddition on solid support. p-Cyano derivatives showed nematic and/or smectic A phases. A bilayer smectic phase for 2h is proposed by the combination of molecular mechanics calculation and X-ray diffraction experiment.     

Network theory of the nonlinear behaviour of polymer melts. Simple shear flow

Summary The network model developed in a previous paper is applied to the simple shear flow of polymer melts. The constitutive equation obtained consists of two terms. One of them describes the stress due to the network strands which exist at the onset of the deformation, dissociate during the deformation and result in a single integral constitutive equation with a strain dependent damping function. The formulation of the damping function in invariant form seems to be almost impossible.The second normal stress differenceN ₂ of the model is not zero,but has negative values. According to our model this is a consequence of the deformation dependence of the disentanglement process. The theory is compared with experimental data for a LDPE melt. It is found that the model explains the main features of the shear flow behaviour of the LDPE melt investigated preciously.

---

Zusammenfassung Das Netzwerk-Modell, das in einer vorangegangenen Arbeit entwickelt wurde, wird für die einfache Scherströmung von Polymerschelzen angewendet. Die abgeleitete rheologische Zustandsgleichung besteht aus zwei Gliedern. Das erste beschreibt die Spannung-Dehnung-Beziehung der Kettensegmente, die zu Beginn der Deformation existieren und während der Deformation aufgelöst werden. Es hat die Form der einfachen Integralbeziehung mit einer Gedächtnisfunktion. Es ist kaum möglich, die dabei erhaltene Gedächtnisfunktion als Funktion der Invarianten der der Tensoren darzustellen. Die zweite Normal-SpannungsdifferenzN ₂ des Modells ist nicht Null und hat einen negativen Wert. Dies ist nach unserem Modell eine Folge der Deformationsabhängigkeit des Entschlaufungsprozesses. Die Theorie wird mit dem experimentellen Daten für eine LDPE-Schmelze verglichen, wobei sich zeigt, daß das Modell die wesentlichen Merkmale des Scherverhaltens der LDPE-Schmelze gut erklärt.

     

Syntheses and X-Ray Crystal Structures of 2-Aminoindenes and Aminocymantrenes

Substituted 2-aminoindenes have been synthesized in almost quantitative yields by reactions of amines such as methylpiperazine, trimethylethylenediamine, 1,4-diaza-cycloheptane and N,N′-dimethylethylenediamine with 2-indanone. The 2-aminoindenes can be deprotonated and reacted with BrMn(CO)₃(Py)₂ to produce the respective aminoindenyl-cymantrenes in yields between 55–70%. The X-ray crystal structures of 2-(methylpiperazine)indenyl-cymantrene 5 (P1 , a = 12.667(3) Å, b = 16.630(3) Å, c = 17.382(3) Å, α = 72.70(3)°, β = 74.59(3)°, γ = 88.66(3)°, V = 3364.1(12) Å ³, Z = 8, R1(2σ(I)) = 4.02%, wR2(2σ(I)) = 10.30%) and the HClO₄ adduct of 2-(trimethylethylenediamine)-indenyl-cymantrene 6 (Cc, a = 23.722(5) Å, b = 6.9080 Å, c = 13.264 Å, β = 111.77(3)°, V = 2018.6(7) Å 3, Z = 4, R1(2σ(I)) = 2.94%, wR2(2σ(I)) = 7.90%) were determined. In both complexes the indenyl-carbon bonded to nitrogen displays significantly longer bonds to manganese [223.5(3)–225.8(3) pm] than the other four carbon atoms [213.3(3)–219.1(3) pm]. The short indenyl-nitrogen bonds of 136.2(4) and 137.8(4) pm are indicative of a substantial multiple bond character. The complexation of Zn²⁺ by the nitrogen atoms of 6 results in significant shifts of the CO stretching frequencies.     

Vacuum Ultraviolet Photolysis of Polyethylene,Polypropylene, and Polystyrene

Using infrared reflection absorption spectroscopy (IRRAS), quartz crystal microbalance (QMB) measurements, and X-ray photoelectron spectroscopy (XPS) in combination with chemical derivatization techniques the VUV photolysis of polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. A mass balance obtained from the quantification of the data was used to suggest reaction path ways. Although PE and PP behave similar, the mass loss is about 8 times higher in the case of PP. These differences originate from the higher disproportionation to recombination ratio for the branched polymer. Both polymers form double bonds and at extended treatment times they tend to crosslink. PS is rather stable due to the possibility of the energy dissipation by fluorescence.     

Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.