绿肥对华北潮土土壤可溶性有机物的影响

在华北潮土上种植不同绿肥,于绿肥翻压前原位采集其地上部及土壤样品,进行56d的绿肥翻压模拟试验。设毛叶苕子(Vicia villosa Roth.)、二月兰(Orychophragmus Violaceus L.)、黑麦(Secale cereale L.)三个绿肥处理和无绿肥对照处理,分析培养过程中土壤可溶性有机物(DOM)组分及其紫外-可见光谱参数的变化,以探究绿肥对土壤DOM的影响。种植和翻压绿肥增加土壤可溶性有机碳(DOC)、总有机酸碳(TOAs)和总碳水化合物碳(TCs)含量,三者的变化趋势一致,各处理均在培养第1 d上升至峰值后迅速下降。毛叶苕子提高DOC和TOAs的效果最好,最高比对照增加114.01%(培养第1d)和109.10%(培养第14 d)。黑麦提高TCs的效果最好,最高比对照增加323.18%(培养第42 d)。种植和翻压绿肥增加土壤可溶性有机氮(DON)含量,与DOC变化趋势不同,各处理在培养第1 d上升后迅速下降一段时间后又迅速上升。毛叶苕子提高DON的效果最好,最高比对照增加305.83%(培养第42d)。绿肥增加了SUVA₂₅₄,SUVA₂₆₀,SUVA₂₇₂,SUVA₂₈₀,SAUC_240-400,降低了A₂₅₀/A₃₆₅和A₂₄₀/A₄₂₀。紫外-可见光谱参数的主成分分析显示SUVA₂₅₄,SUVA₂₆₀,SUVA₂₇₂,SUVA₂₈₀间有很高正相关性,A₂₅₀/A₃₆₅和A₂₄₀/A₄₂₀间亦有很高正相关性,SAUC_240-400是这些参数中表征DOM性质的关键因子。综上结果表明,种植翻压绿肥增加了土壤DOM含量,提高了土壤DOM的芳香性、疏水性、腐殖化程度、平均分子量,增加了土壤DOM的稳定性。     

应用遗传算法结合连续投影算法近红外光谱检测土壤有机质研究

应用遗传算法结合连续投影算法近红外光谱检测土壤有机质研究。采集浙江省文城地区农田土壤样品近红外光谱数据,土壤样品数为394个。为简化模型,采用遗传算法结合连续投影算法挑选出18个特征波长建模,应用偏最小二乘回归建立有机质预测模型,建模集的决定系数为0.81,均方根预测误差为0.22, 剩余预测偏差为2.31,预测集的决定系数为0.83,均方根预测误差为0.20,剩余预测偏差为2.45。研究发现,遗传算法结合连续投影算法在简化模型同时,模型的预测评价指标同采用全谱波长建模并没有明显降低。因此,遗传算法结合连续投影算法挑选的特征波长可以应用于近红外光谱检测土壤有机质含量。     

采用瞬态电致发光研究磷光掺杂体系发光瞬时过冲的发射机理

掺杂型有机电致发光器件中载流子累积、载流子复合等物理过程的深入了解对提高器件效率和稳定性有重要作用。通过瞬态电致发光测量可以研究掺杂型有机电致发光器件内部载流子累积。对结构为: ITO/NPB(30 nm)/host: Ir(ppy)₃/BCP(10 nm)/Alq₃(20 nm)/LiF(0.7 nm)/Al(100 nm)的器件分别研究主体材料以及客体掺杂浓度变化对有机掺杂型器件瞬态发光行为的影响。实验发现,当单脉冲驱动电压关闭后,只有TAZ: Ir(ppy)₃掺杂器件出现发光瞬时过冲现象,即发光强度衰减到一定时间时突然增强;且随着客体掺杂浓度的增加,瞬时过冲强度逐渐增强。通过分析TAZ: Ir(ppy)₃掺杂器件的瞬时过冲强度对主体材料与掺杂浓度的依赖关系,进一步发现,瞬时过冲效应强度主要受限于发光层内部积累的电子载流子;TAZ: Ir(ppy)₃发光层内电子容易被客体材料分子俘获并积累,电场突变时陷阱电子容易跳跃到主体材料上并与主体材料上积累的空穴形成激子,激子能量传递到客体材料上并复合发光继而出现发光强度的瞬时过冲现象。研究发光瞬时过冲行为可探究器件发光层内的载流子和激子的动态行为,有利于指导器件的设计,从而减少积累电荷的影响,提高器件的性能。     

影响异戊二烯大气光解形成二次有机气溶胶的环境因素研究

通过自制的烟雾腔系统研究羟基启动的异戊二烯光解形成二次有机气溶胶(SOA)过程中环境因素的影响.使用气溶胶粒径光谱仪测量了SOA的粒径分布,通过光解实验研究了光照时间、反应物浓度以及CH3ONO浓度对异戊二烯光解形成SOA的影响.结果表明,异戊二烯光解形成的SOA空气动力学直径在0.4 mm～1.4 mm之间,这些粒子的直径小于2.5μm的微细粒子很容易沉积在人体肺泡内,对人体健康产生很大危害;不管是SOA粒子的粒子数浓度还是质量数浓度都随着反应时间的增长、光照强度的增强和反应物浓度的增加而增加.该研究为大气颗粒物排放源的外场测量提供了非常有用的信息.     

Structural and electronic properties of potassium-doped 1,2;8,9-dibenzopentacene superconductor: comparing with doped [7]phenacenes

Polycyclic aromatic hydrocarbons doped by metal have exhibited the potential of high temperature superconductivity. Understanding the basic properties of materials is the key to reveal the superconductivity. Here, a systemically theoretical study has been done to explore crystal structures and electronic properties of pristine and potassium-doped 1,2;8,9-dibenzopentacene, compared with [7]phenacenes case. We determined that vdW-DF2 functional is more suitable to describe the non-local interaction in a molecular crystal. Based on this functional, we predicted the crystal structures and investigated in detail the K atomic positions in a system. It was found that the intralayer doping leads to lower total energy. From the calculated formation energy, for each 1,2;8,9-dibenzopentacene molecule, the doping of two electrons is more stable under the relatively K-poor condition while the doping of four electrons is more stable under the K-rich condition. Between these two phases, the three-electron doping phase stabilises in a narrow region of K chemical potential. Combining with the electronic states at Fermi level, we analysed the reasons of superconductivity enhancement in doped 1,2;8,9-dibenzopentacene. This work further deepens the understanding of 1,2;8,9-dibenzopentacene superconductor.     

OLED薄膜干燥剂的制备及其对OLED的影响

有机电致发光显示器对水和氧气非常敏感,渗入器件后会和有机功能层及电极材料反应而影响器件的寿命及稳定性。本文提出了一种液体可涂覆干燥剂的制备方法,采用了氯化物干燥剂和价格低廉的阳离子成膜剂结合合成一种具有很好成膜性、且吸水效果很强的涂覆干燥剂。封装240 h后,使用薄膜干燥剂的器件的亮度分别为平均值的103.5%、83.3%以及119.8%,效率为平均值的130.7%、65.6%以及126.0%。与传统干燥剂相比,该薄膜干燥剂的吸湿效果更佳,且可延缓OLED的老化。     

有机薄膜电致发光器件工艺检测的一种简便方法——覆膜加热观测法

提出了一种简便易行、并与有机薄膜电致发光器件制备工艺完全兼容的工艺检测方法－－覆膜加热观测法。这种方法是在器件的制备工艺过程中,同时在铟锡氧化物（ITO）电极的各层有机薄膜上覆盖一层不透气的薄膜（如金属Al膜等）,接着进行快速加热,最后对器件表面进行形貌观测。采用这种方法,观察了器件表面气泡的形成过程,观察了加热温度、ITO表面处理以及有机物纯度对敢泡形成的影响。实验表明,覆膜加热观测法能有效地对工艺进行对比检测,从而达到改进工艺、提高器件质量的目的。     

掺杂8-羟基喹啉铝薄膜的电致发光特性研究

在具有电致发光(EL)的有机整合染料8-羟基喹啉铝(Alq3)中接以染料罗丹明6G(R6G),用真空热蒸发的方法制备器件,获得了峰值波长575nm的黄色直流薄膜电致发光,从而通过掺杂改变了发光颜色.并在Alq3发光层不同区域插入一掺杂薄层(Alq3:R6G),利用其发光波长与未掺杂部分(Alq3)的不同,以此作为“探测层”,通过对器件光谱及电学特性的测量与分析,探讨了有关发光区域,发光机理,界面对发光影响等基本问题.     

Adjacency Effect in the Atmospheric Correction of Satellite Remote Sensing Data: Evaluation of the Influence of Aerosol Extinction Profiles

In the atmospheric correction of satellite data in the visible and near-infrared bands, it is necessary to remove the adjacency effect due to the reflection from contiguous pixels. Evaluation of the influence of aerosol vertical distributions on the adjacency effect is done by calculating the single-scattering light intensity which, after the reflection at the ground surface, reaches the satellite sensor via a single scattering with a molecule or an aerosol particle. In the simulation, we assume aerosol vertical profiles similar to those used in the MODTRAN radiation transfer code, and those having a mixed layer with a uniform value of the aerosol extinction coefficient. We assume for the ground surface a simple model representing a border of land/sea surfaces. In spite of the single scattering approximation, it is confirmed that even if the optical thickness is the same, we have a larger adjacency effect when the extinction coefficient is large at higher altitudes. We also discuss the dependence of the adjacency effect on the aerosol optical thickness and that on the difference in the reflectances of the land and sea surfaces along the border.     

Anticanonical Rational Surfaces

A determination of the fixed components, base points and irregularity is made for arbitrary numerically effective divisors on any smooth projective rational surface having an effective anticanonical divisor. All of the results are proven over an algebraically closed field of arbitrary characteristic. Applications, to be treated in separate papers, include questions involving: points in good position, birational models of rational surfaces in projective space, and resolutions for 0-dimensional subschemes of defined by complete ideals.