二磺酸掺杂高热稳定性导电聚苯胺的合成及性能

以有机二磺酸作为掺杂剂合成了具有高热稳定性的二磺酸掺杂导电聚苯胺。研究了反应时间、温度、酸/苯胺摩尔比等因素对产率、产物的导电率与分子量的影响。利用微波加热的方法测试有机二磺酸掺杂聚苯胺的热稳定性能，结果表明：有机二磺酸掺杂的导电聚苯胺在微波场中升温速率快，并且具有良好的反复升温性能。     

CdSe纳米线阵列的制备及其表征(英)

通过在含有SeSO₃^2-和Cd²⁺的室温水溶液中，用模板-电沉积法在纳米孔阵列阳极氧化铝膜(AAM)模板中制备了高有序性的CdSe纳米线阵列，并对其形貌、结构和组分进行了表征。扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明，纳米线阵列中的CdSe纳米线具有相同的长度和直径，分别对应于使用的AAM模板的厚度和孔径；X-射线衍射(XRD)和X-射线能谱(EDAX)结果表明，CdSe纳米线中Cd和Se的化学组成非常接近于1∶1，其结构为立方CdSe。另外，对模板-电沉积法制备CdSe纳米线的机理进行了讨论。     

有机锡配合物[(o-Cl-PhCH2)2Sn(OCOC9H6N)2]·2(C6H6)的合成和晶体结构研究

0引言某些有机锡羧酸酯化合物具有杀虫、杀菌和抗癌活性,引起人们极大的兴趣[1~3]。近年来的研究结果表明,该类化合物中心锡原子的配位形式既决定于与锡原子直接相连的烃基的结构,也与配体的类型有关,尤其是含有孤电子对的杂环酸的引入,导致了许多新型结构有机锡化合物的产生[4     

Relativistic atomic natural orbital type basis sets for the alkaline and alkaline-earth atoms applied to the ground-state potentials for the corresponding dimers

New basis sets of the atomic natural orbital (ANO) type have been developed for the atoms Li–Fr and Be–Ra. The ANOs have been obtained from the average density matrix of the ground states and the lowest excited states of the atom, the positive ion, and the dimer at its equilibirium geometry. Scalar realtivisitc effects are included through the use of a Douglas–Kroll Hamiltonian. Multiconfigurational wave functions have been used with dynamic correlation included using second-order perturbation theory (CASSCF/CASPT2). The basis sets are applied in calculations of the ground-state potentials for the dimers. Computed bond energies are accurate to within 0.05 eV for the alkaline dimers and 0.02 eV for the alkaline-earth dimers (except for Be₂).Acknowledgments.ensp;B.O.R. would like to express his gratitude to Prof. Jacopo Tomasi for all the inspiration that his scientific work has given him through the years and continues to do in particular through the work on solvent effects on molecular properties. This work has been supported by a grant from the Swedish Science Research Council, VR.Contribution to the Jacopo Tomasi Honorary Issue     

快速响应的温敏性聚(N-异丙基丙烯酰胺)水凝胶 Ⅰ.以CaCO_3为成孔剂制备方法、表征及动力学研究

以不同粒径的CaCO3粒子为成孔剂 ,合成了快速响应的温敏性聚 (N 异丙基丙烯酰胺 ) (PNIPA)水凝胶 .利用扫描电镜观察到水凝胶具有特殊的孔状结构 ,得到水凝胶的孔径大小为几十微米左右 .动力学研究表明 ,该水凝胶在温敏膨胀或收缩时 ,具有快速的响应速率 ,在 10min内的失水率可达 90 % .比较了干凝胶和4 0℃下失水后的凝胶两种不同状态下水凝胶的膨胀曲线 ,发现两者的溶胀动力学曲线明显不同 ,前者的曲线有拐点 .同时发现与失水收缩速率相比 ,水凝胶具有较慢的吸水膨胀速率 .     

Synthesis,Vibrational Spectrum and Structure of the Tetracyanoborate K[B(CN)4]·CH3CN

The new tetracyanoborate K[B(CN)₄]·CH₃CN was synthesized by dissolution of the solvent‐free K[B(CN)₄] in acetonitrile and subsequent careful crystallization. The crystal structure has been determined by single‐crystal X‐ray diffraction. It crystallizes in the orthorhombic space group P2₁2₁2₁ with Z = 4. Some comparisons with related structures are made, and the vibrational spectrum is discussed.     

Solvating,manipulating, damaging,and repairing DNA in a computer

This work highlights four different topics in modeling of DNA: (i) the importance of water and ions together with the structure and function of DNA; the hydration structure around the ions appears to be the determining factor in the ion coordination to DNA, as demonstrated in the results of our MD simulations; (ii) how MD simulations can be used to simulate single molecule manipulation experiments as a complement to reveal the structural dynamics of the studied biomolecules; (iii) how damaged DNA can be studied in computer simulations; and (iv) how repair of damaged DNA can be studied theoretically. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

主体分子六次甲基四胺与客体分子二氯化六水合钴(Ⅱ)和结晶水包结物的研究

用X射线单晶衍射分析法研究主体分子六次甲基四胺与客体分子二氯化六水合钴（Ⅱ）和结晶水包结物晶体结构。其分子式为［（CH2）6N4］2·［（Co（H2O）6］Cl2·4H2O，Mr＝59038。晶体属三斜晶系，空间群为P1。晶胞参数：3341个衍射点，其中3148个独立衍射点，2754（F0＞6σ（F0））为可观察反射点。在晶胞内，客体分子和结晶水形成氢键：，客体分子与主体分子形成氢键晶胞之间形成氢键晶胞之内和晶胞之间主体分子和客体分子以及结晶水以氢键和范德华力相联系形成稳定的晶格。     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.