Mathematical Modeling and Simulation of Corrosion Processes in Nigerian Crude Oil Pipelines

In this work, a corrosion prediction mathematical model for risk assessment in oil and gas production and transportation facilities has been created. This work focuses on partial pressure of carbon (iv) oxide, CO₂ and the operating temperature in process equipment and transportation facility pipes as a function of corrosion rate. The model equation formulated was based on the principle of multiple linear regressions of data. The final model representing the corrosion rate of crude oil equipment was obtained CR = b _o + b ₁ T + b ₂ P (CO ₂). The model was simulated using polymath software. The correlation between the experimental and simulated resulted obtained using root mean square deviation (coefficient of determination) was 99.74% which is high, suggesting that the relationship between the predictor and response variables is linear. The variation in the model equation is 0.0066374. This low value of the variance shows that the model is accurate.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Flow Assurance Issues and Control with Naphthenic Oils

Naphthenic oil production is known to be made difficult by stable emulsion formation and possible scaling of calcium naphthenates. From a flow assurance point of view, it is of major importance to foresee these two possible issues at the earliest stage of the project development especially for deep-offshore fields. In this article, a classification of crude oils based on density, acidity and acid types is proposed. Process schemes adapted to the different oil types are also described.     

The Effect of Temperature on GPC for the Separation of PCBs from Transformer Oil and Subsequent Analysis by GC-MSD

Abstract

The analysis of PCBs often involves lengthy and expensive cleanup procedures to remove interferences associated with environmental sample matrices. Gel permeation chromatography (GPC) has proven to be a useful tool in removing many of these interferences from environmental samples, especially from difficult matrices such as oils, lipids and sediments. This paper describes the effect of temperature upon the GPC column in separating PCBs from transformer oil and its implication on GC-MS analysis.     

Significance of Photosensitized Oxidation of Alkanes During the Photochemical Degradation of Petroleum Hydrocarbon Fractions in Seawater

Abstract

A crude oil hydrocarbon fraction was photooxidized as a surface film on seawater under simulated environmental conditions. After irradiation, gas chromatography and gas chromatography/mass spectrometry analyses allowed to demonstrate the presence of relatively high quantities of compounds deriving from the photosensitized oxidation of n-alkanes, pristane and phytane, being among the non-acidic photoproducts of this fraction. The results suggest that the photochemical degradation of alkanes should be considered in studies of the fate of petroleum crudes in the marine environment.     

Nanofluid in Hydrophilic State for EOR Implication Through Carbonate Reservoir

More than 50% of oil is trapped in petroleum reservoirs after applying primary and secondary recovery methods for removal. Thus, to produce more crude oils from these reservoirs, different enhanced oil recovery (EOR) approaches should be performed. In this research, the effect of hydrophilic nanoparticles of SiO₂ at 12 nm size, in (EOR) from carbonate reservoir is systematically investigated. Using this nanoparticle, we can increase viscosity of the injection fluid and then lower the mobility ratio between oil and nanofluid in carbonate reservoirs. To this end, a core flooding apparatus was used to determine the effectiveness and robustness of nanosilica for EOR from carbonate reservoirs. These experiments are applied on the reservoir carbonate core samples, which are saturated with brine and oil that was injected with nanoparticles of SiO₂ at various concentrations. The output results depict that, with increasing nanoparticle concentration, the viscosity of the injection fluid increases and results in decreased mobility ratio between oil and nanofluid. The results confirm that using the nanoparticle increases the recovery. Also, increasing the nanoparticle concentration up to 0.6% increases the ultimate recovery (%OOIP), but a further increase to 1.0 does not have a significant effect.     

甘油酯化降酸反应过程研究

研究了酸化油甘油酯化反应降低酸值的反应过程,考察了温度、甘油与酸化油中游离脂肪酸物质的量比和单甘酯含量对反应的影响,发现甘油单甘酯能明显促进酯化反应的进行。对二元体系甘油三酯-甘油、油酸-甘油和单甘酯-甘油的液-液相平衡以及甘油-单甘酯-油酸三元体系液-液相平衡的分析结果表明,甘油单甘酯的存在能够显著提高甘油与脂肪酸的相互溶解。这较好地解释了甘油单甘酯在酸化油酯化反应中的促进作用。     

多频超声反应槽连续强化酸化油酯交换制备生物柴油研究

以平均酸值高达33.07 mgKOH/g不可食用的廉价酸化油为原料,利用自行设计的多频超声溢流槽连续强化酯交换反应生物柴油生产装置,先后经预酯化、酯交换两步反应,高效、低耗的制备生物柴油。主要考察了室温下物料流量(停留时间)、超声功率、超声频率及组合、KOH用量、醇油物质的量比对酯交换反应的影响及单位产品能耗。结果表明,多频组合超声辐射比单频更有利于生物柴油的制备;预酯化后的油料在流量为25 L/h(物料停留时间为54 min),催化剂(KOH)用量为1.2%(质量分数),醇油物质的量比为6∶1和各反应槽功率为200 W的条件下,甲酯产率达96.83%。50 L废弃酸化油能制得符合国标GB19147—2009的生物柴油48L,整个生物柴油制备过程总耗时和总耗电量仅为8.667 h、5.42 kWh。     

Evaluation of alternative solvents for improvement of oil extraction from rapeseeds

This present study was designed to evaluate the performances of five alternative solvents (alcohols: ethanol, isopropanol and terpenes: d-limonene, α-pinene, p-cymene) compared to n-hexane in rapeseed oil extraction. The extracted oils were quantitatively and qualitatively analyzed to compare the solvents’ performances in terms of kinetics, fatty acid compositions, lipid yields, and classes. Moreover, micronutrients in extracted oils were also respectively quantified by high-performance liquid chromatography (HPLC) and gas chromatography (GC). In addition, the interactions between alternative solvents and rapeseed oil have been theoretically studied with the Hansen solubility methodology to get a better comprehension of dissolving mechanisms. The results indicated that p-cymene could be the most promising solvent for n-hexane substitution with higher lipid yield and good selectivity, despite the micronutrient contents were relatively low.     

The Effect of Alkaline Addition in Hydrothermal Pretreatment of Empty Fruit Bunches on Enzymatic Hydrolysis Efficiencies

In general, lignocellulosic biomass contains three major components, namely lignin, hemicellulose and cellulose which are the polymers of C5 and C6 sugars. Thus, there is potential to utilize of this biomass for bioethanol production. The hydrolysis of cellulose into glucose was difficult due to the more fibrous nature and thus inhibit enzyme penetration into the cellulose. In order to solve this problem, hydrothermal pretreatment can be used for breaking the bonds within the lignin structure and increase the accessibility of enzyme into the cellulose. In this study, the effect of chemical addition, sodium hydroxide (NaOH) and calcium oxide (CaO) in hydrothermal pretreatment at 180 °C and 30 minutes reaction time of palm oil empty fruit bunches (EFB) on the enzymatic hydrolysis efficiencies was investigated. The enzymatic hydrolysis of hydrothermally pretreated EFB give the highest concentration of glucose at 0.67 g/L while the hydrothermally pretreated of EFB in the presence of NaOH gives the lowest glucose concentration 0.45 g/L.