Analysis and Fate of Dibenzothiophene Derivatives in the Marine Environment

Abstract

Dibenzothiophene (DBT) and related methylated derivatives are known to be among the most persistent and probably the most toxic PAH in the marine environment. Their analysis and their fate by photo-oxidation and biodegradation were studied.

The methylated DBT isomers, provided that they are resolved by high resolution GC, were used as organic markers of oil pollution in oysters. The determination of the relative distribution of the four monomethyl DBT allowed to characterize the source of pollution in an oyster-area in the North Brittany (France).

The fate of methylated DBT compounds was studied in a controlled sea-water enclosure where Arabian light oil was spilled. Analysis of the weathered oil showed that: (i) oil was degraded by photo-oxidation at a rate of 0.004% day; (ii) the half-lives of photolysis of methylated DBT was dependent upon the number of methyl groups on the aromatic nucleus: 8 days for DBT, 20 days for methyl-1 DBT and more than 2 years for trimethylated DBT. Compounds solubilized in the water column were identified as methyl-substituted dibenzothiophene sulfoxides and sulfones by HPLC with synchrofluorescence and GC-flame photometric detection.

The metabolic pathway of DBT was established in vitro. Rat microsomes transformed this substrate to DBT-5-oxide and subsequently to DBT-5-dioxide. Such an enzymatic S-oxidation was shown to be principally Cytochrome-P-450 dependent. It is suggested that the mixed-function oxidase (MFO) activity of marine species could be evaluated by this S-oxidation test in addition to the usual aryl hydrocarbon hydroxylase.     

Studies on Melamine Modified Polyesteramide as Anticorrosive Coatings from Linseed Oil: A Sustainable Resource

Melamine modified polyester amide (MPEA) was synthesized by the reaction of linseed oil fatty amide. The resin was further cured at room temperature by polystyrene co‐maleic anhydride (SMA) in different phr (30–80) to obtain MPEA coatings. The probable structure of MPEA was confirmed by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopic techniques. The physico‐chemical characterization of these resins viz. iodine value, saponification value, refractive index, inherent viscosity were carried out by standard methods. MPEA (40 wt%) solution in ethylene glycol monomethyl ether (EGME) was applied on a mild steel strip of standard sizes to study their physico‐mechanical and chemical resistance properties. It was found that coatings of MPEA with 60 parts per hundred of the resin (phr) of SMA showed the best performance in physico‐mechanical and alkali resistance properties. Thermal stability and curing behavior were studied by Thermo Gravimetric Analyses (TGA) and Differential Scanning Calorimetry (DSC), respectively.     

A New Polymer Flooding Agent Prepared Through Intermacromolecular Complexation

Abstract

This paper reports a new polymer flooding agent used for enhanced oil recovery (EOR), poly(acrylamide-acrylic acid) [P(AM-AA)]/poly(acrylamide-dimethyldiallylammonium chloride) [P(AM-DMDAAC)] polyelectrolyte complex. The solution viscosity of prepared P(AM-AA)/P(AM-DMDAAC) complex is enhanced due to the strong interaction between the two oppositely charged copolymers, i.e., P(AM-AA) and P(AM-DMDAAC), which were prepared through radical copolymerization. The ionic content could be controlled by changing the reaction conditions. The structures of the two copolymers were characterized through FT-IR, ¹H NMR, and acidic and precipitation titration. The formation as well as the factors affecting the P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex were investigated by means of viscosity measuring and light transmittance testing. The experimental results show that the composition of the copolymers, the pH value, and the concentration of the polymer solutions have remarkable effects on the formation of P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex and the solution viscosity. When DMDAAC content in P(AM-DMDAAC) is 3.2 mol%, AA content in P(AM-AA) is 48–58 mol%, the weight ratio of P(AM-AA) to P(AM-DMDAAC) is 70/30–30/70, the pH value of the solution is 6–10, and the concentration of solution is 1000–3500 ppm, then a homogeneous solution of P(AM-AA)/P(AM-DMDAAC) poly-electrolyte complex could be obtained which exhibits a much higher solution viscosity compared with its components.     

Styrene-PEG (600) DMA Crosslinked Polymers for Absorption of Oil Derivatives

In this work, styrene (St) based crosslinked polymers were prepared for removal of oil derivatives from aqueous solutions. Polyethylene glycol (600) dimethacrylate (PEG (600) DMA) was used as crosslinker in synthesis of styrene based crosslinked polymers, for the first time. The polymers were characterized by FTIR, SEM, elemental analysis and solvent (toluene, chloroform and fuel-oil) absorption capacities. The effects of different reaction parameters like crosslinker type, diluents amount and the presence of pore forming agent on the absorption properties of polymers were investigated. The polymers synthesized by using PEG (600) DMA have higher solvent absorption capacity than that of synthesized by using conventional crosslinker. Furthermore, the polymers synthesized in the presence of good diluents have higher absorption capacities. The addition of pore forming agent into the reaction medium has also improved the absorption rate of polymers. The absorption capacity of polymers in different solvents is in order of chloroform > toluene > fuel-oil. It was seen that oil derivatives can be removed efficiently from water by the St-PEG (600) DMA polymers.     

Investigation of the complexation of essential oil components with cyclodextrins

The formation of inclusion complexes of six essential oil (EO) components (β-caryophyllene, cis-ocimene, trans-ocimene, sabinene hydrate (thujanol), γ-terpinene and α-terpineol) with six cyclodextrins (CDs) (α-CD, β-CD, γ-CD, HP-β-CD, RAMEB and CRYSMEB) was investigated by using static headspace-gas chromatography and UV–visible spectroscopy. Retention studies showed that CDs could efficiently reduce the volatility of EO components except for β-caryophyllene with α-CD. In this case, no inclusion complex was detected while for other compounds the formation of 1:1 inclusion complexes was observed. Results revealed that the inclusion stability mainly depends on geometric complementarity between encapsulated molecule and CD's cavity. Molecular modelling was used to investigate the complementarities between host and guest. Thus, CDs could efficiently be regarded as promising encapsulants for EO components leading to improve their application in cosmetic, pharmaceutical and agriculture fields.     

Alkane isomers: presence in petroleum ether and complexity

The presence and absence of alkane isomers in petroleum and petroleum derivatives depend on the complexity of these structures. It was assumed that the more complex the structure is the less probable it is that that the molecule can be detected in any petroleum derivative. Complexity is a vague concept, which has not been defined in quantitative terms yet, and therefore there is no experimental method, which could be used to determine ‘complexity’. Mass spectrometry and infrared spectroscopy in combination with gas chromatography were used to identify the various structural isomers of alkanes in petroleum ether. The isomers were categorised in quantitative terms by using topological indices and linear discriminant analysis. It was found that alkanes possessing a more complex, highly branched structure are less probable to be detected in petroleum ether than isomers with a simpler backbone structure. It was proposed that the experimental ‘measure’ of the complexity of isomer_i should be proportional to 1/C_i , where C_i , denotes the concentration of isomer_i in a (primary) petroleum derivative.     

重度原油注空气低温氧化过程研究(英文)

低温氧化反应对现场燃烧(ISC)技术点火的成功有十分重要的影响.采用高压氧化管,研究了不同温度压力下,新疆克拉玛依重度原油的低温氧化过程.结果表明,温度和压力的变化对低温氧化反应的放热程度、持续时间以及气体产物有明显影响.适合油样低温氧化反应的温度和压力分别为150℃和10MPa.此外,采用纯组分替代原油族组分进行低温氧化实验,研究低温氧化反应对原油族组分(饱和烃、芳香烃、胶质、沥青质)含量的影响.结果表明,原油所含族组分中,芳香烃组分最易被氧化,其含量由氧化前的19.17%减少到12.38%(150℃)和9.51%(250℃).随着低温氧化过程的进行,结构复杂的族组分(胶质、沥青质)的含量明显增加.实验数据对油藏实施注空气技术,以及该技术现场实施条件的确定有十分重要的指导意义.     

大豆油煎炸过程理化指标与LF-NMR弛豫特性的相关性研究

在对大豆油无料/薯条煎炸过程[温度:(180±5)℃,持续36 h]中的酸价(AV)、粘度(V)、吸光值(A)及总极性化合物(TPC)含量等及低场核磁共振(LF-NMR)弛豫特性(峰起始时间T21、T22、T23、相应的峰面积比例S21、S22、S23、单组份弛豫时间T2W)变化规律研究的基础上,利用多元回归分析建立了理化指标与其LF-NMR检测结果的相关性模型,并进行验证。结果表明:大豆油的酸价、TPC含量及S21峰面积均随煎炸时间的延长而线性增大,T21、T22峰起始时间及T2W则随煎炸时间的延长而线性减小(r2>0.90),粘度、吸光值随煎炸时间的延长逐渐增加并符合二项式关系(r2>0.90),而T23峰起始时间及S22、S23与煎炸时间之间无明显规律性变化。煎炸薯条后,油样的酸价、粘度、TPC含量、吸光值及S21均较无料煎炸显著增大(P<0.05),而T21、T22峰起始时间及T2W显著缩短。多元回归分析表明,酸价及TPC含量与T2W、T21,粘度与T2W,吸光值与S21间均可建立良好的相关性模型(R2>0.93)。模型验证合理可靠,可通过油样的LF-NMR检测结果有效预测其理化指标的变化。