A study on the glass transition behavior and morphology of semi-interpenetrating polymer networks

The epoxy resin/polyurethane semi-IPN was prepared and the glass transition behavior of the semi-IPN was discussed with DSC and DMA methods. The results show that the two glass transition temperatures (T_g) referring to epoxy resin and polyurethane respectively get closer. Between the two T_g there exists another T_g related to the interface between the two polymers. SEM indicates that this semi-IPN has a two-phase continuous structure which changes with different weight compositions. This is also proved by testing the Young's modulus. It is found that the IPN system has a cellular structure. Comparatively, the compatibility between the two polymers is the best when the weight ratio of EP/PU is 70/30. © 1996 John Wiley & Sons, Inc.     

Miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends by transesterification

The effects of transesterification on the miscibility of poly(ethylene terephthalate)/poly(ethylene 2,6-naphthalate) were studied. Blends were obtained by solution precipitation at room temperature to avoid transesterification during blend preparation. The physical blends and transesterified products were analyzed by wide-angle x-ray scattering, differential scanning calorimetry, and nuclear magnetic resonance spectroscopy. It was found that the physical blends are immiscible and when the extent of transesterification reaches 50% of the completely randomized state, independent of blend composition, the blends are not crystallizable and show a single glass transition temperature between those of starting polymers. The interchange reactions were significantly influenced by annealing temperature and time but negligibly by blend composition. © 1996 John Wiley & Sons, Inc.     

Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

Some novel photosensitive diacetylene diurethanes and their mixtures in common polymers

Some new octa-3,5-diynylene diurethanes were prepared using 3-butyn-1-ol, and all were found to be highly light-sensitive and to undergo topochemical polymerization on exposure to irradiation. The di-n-octyldiurethane was mixed with vinyl polymers such as poly(vinyl acetate) and poly(N,N-dimethylamino-ethyl methacrylate) and the mixtures were made into thin films by spin coating. The films were then irradiated by an electron beam to polymerize the diacetylene. The purple films thus obtained showed third-order nonlinear susceptibility, χ⁽³⁾, of the order of 10⁻¹⁰–10⁻¹¹ e.s.u.     

Preparation of monodispersed polymer-modified colloidal silica particles of less than 50 nm diameter

The preparation of monodisperse, ultrafine polymermodified colloidal silica, 11 or 42 nm in diameter, were studied. The reaction of the colloidal silica with polymeric silane coupler in 1,2-dimethoxyethane and removal of the unreacted polymer with granular silica gel (10–20 mesh) in acetone gave a suspension of monodisperse composite particles.     

Design and synthesis of interpenetrating polymer networks for second-order nonlinear optics

There has been a tremendous recent interest in the development of second-order nonlinear optical (NLO) polymeric materials for photonic applications. However, a major drawback of second-order NLO polymers that prevents them from being used in device applications is the instability of their electric field induced dipolar alignment. The randomization of the dipole orientation leads to the decay of second-order optical nonlinearities. Numerous efforts have been made to increase the stability of the second-order NLO properties of polymers. The search for new approaches to develop NLO polymers with optimal properties has been an active research area since the past decade. A novel approach, combining the hybrid properties of high glass transition temperatures, extensively extensively crosslinked networks and permanent entanglements, based on interpenetrating polymer networks (IPN) is introduced to develop stable second-order NLO materials. Two types of IPN systems are prepared and their properties are investigated. The designing criteria and the rationale for the selection of polymers are discussed. The IPN samples show excellent temporal stability at elevated temperatures. Long-term stability of the optical nonlinearity at 100°C has been observed in these materials. Temporal stability of the NLO properties of these IPNs is synergistically enhanced. Relaxation behavior of the optical nonlinearity of an IPN system has been studied and compared with that of a typical guest/host system. The improved temporal stability of the second-order NLO properties of this IPN system is a result of the combination of the high rigidity of the polymer backbones, crosslinked matrices and permanent entanglements of the polymer networks. A slight modification of the chemical structure resulted in an improvement of the optical quality of the sample.     

A literature review on the in situ generation of reinforcing fibers

Liquid crystal polymers (LCPs) are a relatively new class of materials. These polymers usually consist of rigid rodlike molecular chains and they are capable of forming highly oriented structures even in the as-made product, with strength/modulus significantly higher than those of the conventional flexible chain polymers. Blending of LCPs with conventional polymers produces composite-like structures with LCPs serving as the reinforcing component. The properties of the blends are affected by the size, shape and distribution of the LCPs in the matrix polymer, which in turn are related to the processing conditions such as the blend composition, the extrusion and drawing conditions, the viscosity ratio of the component polymers and the type and grade of the LCPs and the matrix polymers. Improved processability of the blend due to the reduction in viscosity and the improved interfacial adhesion between reinforcing fibers and the matrix polymer are among the advantages of these materials over the conventional short fiber reinforced composites. This paper gives a brief review of the work currently available in the literature on rheology, fabrication, blend morphology and mechanical/thermal properties of the in situ composites from blends of LCPs and conventional polymers.     

The controlled flocculation of submicron emulsion particles. I. A three-step synthetic route to supermicron polymer particles

The basic features of a three-step experimental process to produce supermicron polymer particles are described. First, a submicron emulsifier-free latex is prepared by a well-known technique. Second, the latex is aggregated by destabilizing with cetyl pyridinium chloride under constant stirring conditions, to yield roughly spherical clusters of 6-12 μ diameter. Third, the aggregates are stabilized with poly(vinyl alcohol) and internally coalesced by heating at or above the glass transition temperature. The final product particles have relatively smooth surfaces. Results are qualitatively interpreted in terms of a dynamic equilibrium where the aggregate size is determined by a balance between attractive interparticle potentials and stirring shear forces. Bimodal aggregate size distributions suggest the aggregate break-up mechanism may involve the erosion of individual latex particles and small fragments from the surface of aggregates. © 1996 John Wiley & Sons, Inc.     

高相对分子质量8-羟基喹啉锂聚合物的制备和性能

高分子电致发光显示器(PLED)是近几年来国际、国内的研究热点,取得了很大的进展,其中高分子化金属配合物是一类很有价值的功能材料。通过甲基丙烯酸甲酯(MMA)、苯乙烯(S)和含有8-羟基喹啉的单体共聚合成模板聚合物,再与氢氧化锂作用,实现了8-羟基喹啉锂配合物的高分子化,获得了一种能够溶解在普通的溶剂中的高相对分子质量的含喹啉锂配合物的发光聚合物,并利用元素分析、¹H-NMR、FTIR、UV、PL光谱、DSC、TGA、GPC等方法对其结构和性能作了表征。紫外吸收和光致发光(PL)光谱说明合成共聚物的发光来自于Liq基团,引入的可聚合的链段以及共聚物中的甲基丙烯酸甲酯或苯乙烯链段,并没有影响发光波长的改变。亲核溶剂改变8-羟基喹啉金属配合物分子结构,使共聚物光谱明显红移20nm左右。     

Alcohol Selective Optical Sensor Based on Porous Cholesteric Liquid Crystal Polymer Networks

A responsive hydrogen-bonded cholesteric liquid crystal polymer (CLCP) film with controlled porosity was fabricated as an optical sensor to distinguish between methanol and ethanol in alcohol solutions. To facilitate responding the alcohols, porosity was generated by removing the nonreactive liquid crystal agent, and the hydrogen bridges of CLCP were broken. The sensitivities of CLCPs to ethanol and methanol were obtained by monitoring the wavelength shifts of the transmission spectrum at different alcohol concentrations and ratios of methanol/ethanol. Changes in the central wavelength of the CLCP network transmission spectrum allowed the methanol–ethanol ratio to be discriminated. A linear relationship between wavelength shift of CLCP networks and alcohol concentration was obtained experimentally, and the sensor characteristics were explored. The sensitivities of the CLCPs were 1.35 and 0.18 nm/% to ethanol and methanol, respectively. The sensing sensitivity of cholesteric networks to alcohol molecules increased as the methanol–ethanol ratio declined. Therefore, CLCP could act as a stimuli-responsive material to distinguish the concentrations of acetone and ethanol in mixed solutions. Furthermore, the impact of UV intensity for curing a CLC mixture on the sensing sensitivity to the different alcohol concentrations was also studied. The higher UV intensity could enhance the sensitivity to alcohol molecules and distinguishing ability between methanol and ethanol.