双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

LAMOST光谱J152238.11+333136.1 P-Cygni轮廓分析

LAMOST一期巡天成功获取河外星系光谱超过150 000条,大样本光谱数据为探索奇异、稀有的天体从而完善现有的天体演化理论提供了必要的数据条件;而先进的信息技术为从海量的数据中挖掘这些珍稀样本提供了有效途径。针对采用基于DoPS的数据挖掘方法,从LAMOST DR5星系光谱数据获得的离群数据挖掘结果中,呈现出疑似P-Cygni轮廓特征的光谱J152238.11+333136.1进行了深入讨论。首先针对该光谱的基本信息、疑似P-Cygni轮廓特征以及相应的离群数据挖掘方法进行了简要表述,光谱在Hβ和[OⅢ]λ4860处呈现P-Cygni轮廓,在NeⅢλ3869和HeⅠλ5874处呈现反P-Cygni轮廓;其次,对该特征的真实性及其生成机制从以下4个角度展开讨论。(1)交叉同源观测。Sloan巡天2004年(相差11年)的同源观测,其光谱上并未呈现对应的特征,据推测可能是正在进行的演化活动或者光纤定位误差所致;(2)通过分析光谱质量、减天光残差等方法,分析P-Cygni特征是否为观测或数据处理所致。NeⅢλ3869和HeⅠλ5874处呈现反P-Cygni轮廓可信度较低;同时,通过比较目标光谱与超级天光,以及相邻光纤观测到的光谱在对应波长处的光谱特征,说明存在P-Cygni轮廓为减天光过程导致的可能性;(3)光谱子型差异。IRAS和WISE等近红外同源观测,显示其为Seyfert 2型星系,光学波段发射线强比[NⅡ]/Hα,[OⅢ]/Hβ显示其为HⅡ区,结合光学、红外测光图像特征,推测目标可能是两个星系进行并合活动;(4)从导致P-Cygni轮廓的物理机制的角度,分析了由星系并合触发外流、由恒星形成(爆发)电离气体触发的外流以及由Wolf-Rayet特征星系的超星风等原因引起的可能性。     

空中目标多波段红外辐射特性描述与仿真分析

针对空中目标在复杂背景下的探测需求,根据实际目标的运动特性,分析目标在飞行高度、飞行姿态角改变时的辐射特点,基于MODTRAN计算得到大气辐射和衰减数据,建立目标的三维模型、热辐射和反射模型,搭建空中目标的红外成像仿真系统.分析和仿真结果表明:在中波波段,目标尾焰的红外辐射比蒙皮强很多,在长波波段,蒙皮的红外辐射比较强,仿真图像的细节比较多,尾焰的红外辐射虽然有所减弱,红外成像效果依旧很好;相同探测条件下,由于位置越高大气越稀薄,探测器的可探测距离会变得比较远.目标红外辐射特性的分析和红外仿真系统的搭建对缩短红外探测器的研制周期和进一步确定探测器波段和系统分辨率等指标提供了参考依据.     

三维格子Boltzmann方法研究上升双气泡的运动特性

应用格子Boltzmann三维模型，对双气泡在静水中的运动进行数值研究.采用八点差分和十八点差分格式分别求解一阶▽φ和二阶▽²φ可以有效避免气液密度比过大造成的数值不稳定问题.结果表明：当两个相同直径的气泡在上升时，位置靠上的气泡形状变化像单气泡上升一样，而位置靠下的气泡会受到前一个气泡尾迹的影响，并有很明显的形状变化.当两个气泡直径不同时，不管初始位置如何，大气泡总会对小气泡造成强烈的影响.     

高功率微波作用下限幅器尖峰泄漏特性

针对限幅器在高功率微波（HPM）作用下的尖峰泄漏问题,基于搭建的HPM注入实验平台和电路仿真开展了研究。研究结果表明：当注入功率超过6 dBm时,限幅器会出现尖峰泄漏现象,限幅器泄漏尖峰的上升沿与脉宽随着注入功率的增加而减小,而绝对尖峰泄漏功率随注入功率的增加呈增长趋势,平顶泄漏功率呈近似“线性增加-缓慢下降-小幅增长”趋势。并且,实验结果显示：HPM脉宽与重频对限幅器尖峰泄漏特性基本无影响,其泄漏特性变化规律与单次脉冲的基本一致;尖峰泄漏能量随注入功率的增加而降低。     

Damage characteristics and surface description of near-wall materials subjected to ultrasonic cavitation

For the analysis of ultrasonic cavitation erosion on the surface of materials, the ultrasonic cavitation erosion experiments for AlCu4Mg1 and Ti6Al4V were carried out, and the changes of surface topography, surface roughness, and Vickers hardness were explored. Cavitation pits gradually expand and deepen with the increase of experiment time, and Ti6Al4V is more difficult to erode by cavitation than AlCu4Mg1. After experiments, the cavitation damage characteristics such as the single pit, the rainbow ring area, the fisheye pit, and some small pits were observed, which can be considered to be induced by a single micro-jet impact, ablation effect caused by the high temperature, micro-jet impingement with a sharp angle, and multibeam micro-jets coupling impact or negative pressure in the local area produced by micro-jet impact, respectively. The surface roughness and Vickers hardness of the material increase slowly after rapid growth at different points in time as the experiment time increases. With the increase of the ultrasonic amplitude, both of them first increase and then decrease after the ultrasonic amplitude is greater than 10.8 μm. The increases in surface roughness and Vickers hardness tend to decrease as the viscosity coefficient increases. Ultrasonic cavitation can cause submicron surface roughness and increase surface hardness by 20.36%, so it can be used as a surface treatment method.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

氩气感应耦合等离子体速度与温度数值模拟

为了获得用于研究再入飞行器热防护系统的感应耦合等离子体风洞流场数据,基于流场、电磁场和化学场的多场耦合建立了非平衡态感应耦合等离子体数值模型。利用该模型对不同入口质量流率和不同工作压力下的感应耦合等离子体进行了数值模拟,得到了相应工作参数下感应耦合等离子体温度与速度的分布特性。计算结果表明:等离子体中心线上的速度随着入口质量流率的增大而增大,而随着工作压力的增大而减小;同时,等离子体中心线上的温度随着入口质量流率的增大而减小,而随着压力的增大先减小后增大。这些结果可为感应耦合等离子体风洞优化设计及其工业应用提供理论指导。     

The electronic properties and electron transport of sawtooth penta-graphene nanoribbon under uniaxial strain: ab-initio study

ABSTRACT

The electronic properties and electron transport of a sawtooth penta-graphene nanoribbon (SSPGNR) under uniaxial strains are theoretically studied by density-functional theory (DFT) in combination with the non-equilibrium Green's function formalism. We investigated the electronic structures and the current–voltage (I–V) characteristics of the SSPGNRs under a sequence of uniaxial strains in range from 10% compression to 10% stretch. In this strained range, carbon atoms still keep a pentagon network, but with the changing bond lengths. The C–C bond lengths change almost linearly with the tolerable strain. The value of the band gap of SSPGNRs can be depicted as a parabola under uniaxial strain. Our calculations show that the current is monotonous increase with compressive strain at the same applied bias voltage. In case of tensile strain, the variable rule of the current is different that it increases at first and decrease later. The fundamental physical properties (band structure, I–V characteristic) of SSPGNRs seem to be more sensitive to compressive strain than the stretch strain. The current intensity of the compressive-SSPGNR is by 2 orders of magnitude compared to that of the tensile-SSPGNR at the same strain in range from 6% to 10%. The results obtained from our calculations are beneficial to practical applications of these strained structures in SSPGNRs-based electromechanical devices.     

无绝缘高温超导双饼线圈的瞬态电热特性分析

无绝缘高温超导线圈具有良好的电热稳定性和机械紧凑性,但其充电过程中却有明显的磁场延迟现象。为详细了解无绝缘高温超导线圈励磁过程的瞬态特性,建立了无绝缘高温超导线圈的同轴圆环等效电路模型。通过绕制一个670匝的无绝缘高温超导双饼线圈,在液氮温度下进行不同充电速率的励磁实验,初步验证了等效电路模型的正确性。基于该模型,针对线圈励磁过程的充电和恒流阶段,仿真得到了线圈各匝的径向电流分布规律和电热损耗特性。