光纤光栅法布里-珀罗腔的V-I传输矩阵法研究

快速有效地获得多级联光纤光栅法布里-珀罗(F-P)腔的光谱特性,是优化设计基于上述结构建立的级联多波长激光器、放大器等各种光器件以及复杂分布式传感网络的重要基础和保障.将V-I传输矩阵法用于光纤光栅F-P腔反射光谱特性的分析,并建立了V-I传输矩阵模型.采用该模型对三种不同结构的光纤光栅F-P腔在不同参数下的光谱特性进行分析,并与传统多层膜法的分析结果相比较,表明V-I传输矩阵法能够在保证分析精度的前提下大大节省运算时间.实验结果表明,V-I传输矩阵法对光纤光栅F-P腔谱特性的分析结果比耦合模法更准确.     

近自然彩色图像融合算法及其实时处理系统的发展

在军事和生产领域,特别是在极其恶劣的可视条件下,图像融合技术越来越强调融合效果显示的"近自然"感觉,以及人类视觉感知的要求。从彩色图像融合算法的发展概况出发,着重介绍了两种具有代表性的基于视觉特性的近自然彩色图像融合方法,并特别阐述了课题组近期开展的相关算法研究成果。总结了国内外实时彩色图像融合系统的发展现状,概括了课题组已具备的硬件实验基础,综合分析了实时彩色图像融合技术的若干关键技术,如多源图像特征分析、实时图像配准、融合图像后处理等。针对实时图像融合技术的应用状况,提出图像融合系统未来的发展趋势。     

双偏振结构保偏光纤偏振器的研制

提出了保偏光纤偏振器的一种串联结构,即双偏振结构,报道了研制的结果。并通过对单偏振结构和双偏振结构器件测试结果的比较,得出双偏振结构的保偏光纤偏振器可使器件达到高消光比,并且有稳定的温度特性。     

Ultrafast multiplex CARS investigation of vibrational characteristics in chloroform and PMMA

This paper demonstrates the femtosecond time-resolved coherent anti-Stokes Raman scattering by using folded BOXCARS geometry where an ultrashort broadband coherent white light continuum was used as Stokes pulse, and carries out the non-contact detection at long distance. The CARS signal is so easy to be detected that it can be seen even by nude eye. The C--H bonds of chloroform or PMMA were detected and the vibration modes belonging to the side chain and the main chain in PMMA were also compared. Their vibrational characteristics involved decay process and quantum beating were discussed. This modified CARS experimental technique could make up the deficiency of traditional CARS technique.     

多波长激光探测微小摄像头机理研究北大核心CSCD

基于激光不同波段的探测传输特点,通过分析典型微小摄像头的回波传输特性,提出了一种针对多波长激光特征检测微小摄像头的研究方案。利用几何光学和波动光学理论,分析微小摄像头结构及其反射光谱特征,计算并仿真了一定探测距离下的回波光场,在此基础上搭建多波长激光检测系统。实验结果表明,在一定的景深范围内,具有红外截止滤光片的微小摄像头对可见光的回波光斑衍射环特征明显、条纹对比度高且可探测距离远;近红外波段的目标回波功率低、后向散射干扰严重,可探测距离近;短波红外波段几乎不受红外截止滤光片影响,且1550 nm处于人眼安全波段。实验结果与数值分析、理论仿真结果一致,验证了短波红外激光用于探测微小摄像头的可行性。     

Applications of liquid crystals in biosensing and organic light-emitting devices: future aspects

ABSTRACT

This article summarises recent advances made in our laboratory towards the development of new technological applications, such as biosensors and organic light-emitting diodes (OLEDs) based on liquid crystals (LCs) other than LC displays. The study of biomolecular interaction using LC material relies on the specific interaction between the LC and the biomolecule of interest at interfaces that permit the biomolecular events to be amplified into easily measured signals for various sensing applications. In the first part, we emphases recent studies in the design and modulation of LC-based interfaces based on robust colloidal LC gels for biological amplification, qualitative and quantitative understanding of important biomolecular interactions at LC–aqueous interfaces for diagnostic and laboratory applications and design of LC droplets that hold promise to act as a marker for cells and cell-based interactions. In the second part, we described design of organic materials for application in OLEDs on various discotic monomers, dimers and oligomers. These molecules have the ability to transport charges, holes and electrons. In addition, because of the high conductivity and π–π stacking, they are considered as the advanced materials for practical applications. The technological advances in our laboratory using discotic LCs will be briefly presented in this article.     

Pseudo‐R 2’s in the ordinal probit model*

This paper presents an analysis of the combining mechanism for status information postulated by the mathematical formulation of the theory of status characteristics and expectation states. Six lemmas on the basic features of the combining mechanism are derived from the formulation and discussed. Further, four theorems that illustrate the implications of the particular combining mechanism for power and prestige orders are presented and proven.     

Waterhammer modelling of viscoelastic pipes with a time-dependent Poisson's ratio

Poisson's ratio in viscoelastic materials is a function of time. However, recently developed waterhammer models of viscoelastic pipes consider it constant. This simplifying assumption avoids cumbersome calculations of double convolution integrals which appear if Poisson's ratio is time-dependent. The present research develops a mathematical model taking the time dependency of Poisson's ratio into account for linear viscoelastic pipes. Poisson's ratio is written in terms of relaxation function and bulk modulus which is assumed to be constant. The relaxation function is obtained from creep function given as the viscoelastic property data of pipe material. The results obtained from the present waterhammer model are compared with the experimental data for two different flow rates. The comparison reveals that with the application of the time-dependent Poisson's ratio and unsteady friction, the viscoelastic data of mechanical tests can directly be used for waterhammer analysis with less need for the calibration of the flow configuration. It was also shown that the creep curve calibrated based on the present model is closer to the actual creep curve than that calibrated based on previous models.