8字形主被动锁模掺Er3+光纤激光器

在理论上分析了利用非线性光学环形镜作为等效可饱和吸收体压缩脉冲进行锁模的物理机制。利用8字形主被动混合锁模的结构在调制频率2．498749GHz下，在1．543μm处获得了12ps的锁模脉冲输出，对应谱宽0．22nm，时间脉宽积0．33。在抽运功率50mW情况下，输出脉冲平均功率3．715mW。在调制频率2．499344GHz、2．499114GHz和2．498999GHz时分别并获得了2～4阶幅度较为均衡的有理数谐波锁模脉冲序列。     

Determination of strain and stress distribution on shearwalls by using the speckle photography technique

Speckle photography (SP) is a powerful tool that is adequate to determine small displacements in micrometer range. This information shows other characteristics of structure deformation under loads and can be determined as stress and strain distribution. In this paper we present the results of the application of the SP technique used to study the behaviour of discontinuities in a shearwall model. These structural elements are very important to the stability of buildings. The displacement whole field around the discontinuities and loading points was determined using the pointwise method. This allows us to determine stress distribution at the point of interest by means of the suitable equations. We also present the stress distribution obtained through the finite element method in order to compare the results obtained by means of these two techniques. Good correspondence was found between the displacements determined by both techniques (r=0.982) and also between the stress values we obtained.     

一种实现光源与光纤耦合的方法

本文介绍了一种用显微镜筒与透镜构成的光学系统来实现光源与光纤耦合的方法。该方法具有光路系统小巧方便、耐用、耦合效率高等优点。     

用于高数值孔径物镜的可调光瞳滤波器

根据矢量衍射理论，提出了一种用于提高高数值孔径显微物镜纵向分辨率的可调二元环形光瞳滤波器，通过改变滤波器的环半径获得不同的纵向分辨率，并利用共焦显微术点扩散函数的乘积性大大地降低了旁瓣相对主瓣的比值。模拟结果表明，这种新型滤波器不仅可以提高高数值孔径物镜的纵向分辨率，同时基本上不影响横向分辨率。     

Approximation by Nonlinear Multivariate Sampling Kantorovich Type Operators and Applications to Image Processing

In this article, we study a nonlinear version of the sampling Kantorovich type operators in a multivariate setting and we show applications to image processing. By means of the above operators, we are able to reconstruct continuous and uniformly continuous signals/images (functions). Moreover, we study the modular convergence of these operators in the setting of Orlicz spaces L ^?(? ⁿ ) that allows us to deal the case of not necessarily continuous signals/images. The convergence theorems in L ^p (? ⁿ )-spaces, L ^αlog ^β L(? ⁿ )-spaces and exponential spaces follow as particular cases. Several graphical representations, for the various examples and image processing applications are included.     

Evolutionary variational inequalities with a volterra term

The mathematical model of the injection molding process is characterized by evolutionary inequalities with an elliptic principal part and a Volterra term. Existence and uniqueness of the solution of these problems are derived by means of an argument based on the Banach fixed point theorem. Regularity results are obtained by using the penalty and Rothe method. The results can be considered as a starting point for the numerical treatment and for the application to injection molding.     

紫外Sc_2O_3薄膜的光学和结构性能表征及其激光作用下的损伤机理

利用电子束蒸发方法,在不同沉积温度(50~350℃)下制备了Sc2O3薄膜。分别用分光光度计,小角掠入射X射线衍射仪和轮廓仪测试了薄膜样品的光谱、微结构和表面粗糙度信息,并用薄膜分析软件Essential Macleod计算了Sc2O3薄膜的折射率和消光系数。结果表明:随着沉积温度升高,Sc2O3薄膜结晶程度增强,晶粒尺寸增大,且较高的沉积温度有利于获得较高的折射率。最后用355 nm,8 ns的三倍频Nd:YAG激光器测试了其激光损伤阈值(LIDT),最大值为2.6 J/cm2,且阈值与薄膜的消光系数、表面粗糙度、光学损耗均呈现相反的变化趋势。用光学显微镜和扫描电子显微镜表征了该薄膜的破坏形貌,详细分析了薄膜在不同激光能量作用下破坏的发展过程,以及Sc2O3薄膜在355 nm紫外激光作用下LIDT与制备工艺的关系,重点分析了355 nm激光作用下薄膜的破坏机理。     

大口径光学元件功率谱密度的统计法测量

针对ICF系统要求,提出了一种基于统计理论的大口径光学元件功率谱密度测量方法。该方法将大口径波前划分成足够多个子区域,分别求得每个子区域波前的功率谱密度,根据统计理论可将大口径波前功率谱密度表示为各个子区域波前功率谱密度的加权平均,其权重因子是各子区域对应的面积。模拟计算和实验结果验证了统计法测量的有效性,并表明当子区域个数大于等于8×8时,统计法测量和子孔径拼接测量得到的功率谱密度吻合较好。统计法测量对平台移动精度和环境稳定性要求不高,可应用于大口径光学元件功率谱密度的过程检测。     

纳米TiO_2薄膜的低温等离子体制备技术

以四氯化钛为源物质,氩气为载气,氧气为反应气体,利用低温等离子体增强化学气相沉积在硅基表面制备出了TiO2薄膜。使用场发射扫描电子显微镜、X射线衍射仪等检测分析表征TiO2薄膜的性能与性质,并探讨了工艺条件如基片材料、沉积时间和基片温度对薄膜性能的影响。结果表明:制备的薄膜表面光滑均匀,结构致密,最小晶粒尺寸约15 nm;薄膜的晶型主要依赖于沉积温度,低于300℃沉积的薄膜是无定形的,300℃之上沉积的薄膜是锐钛矿结构。     

Normalized LMS digital filter for chromatic dispersion equalization in 112-Gbit/s PDM-QPSK coherent optical transmission system

High bit rates optical communication systems pose the challenge of their tolerance to linear and non-linear fiber impairments. Coherent optical receivers using digital signal processing techniques can mitigate the fiber impairments in the optical transmission system, including the chromatic dispersion equalization with digital filters. In this paper, an adaptive finite impulse response filter employing normalized least mean square algorithm is developed for compensating the chromatic dispersion in a 112-Gbit/s polarization division multiplexed quadrature phase shift keying coherent communication system, which is established in the VPI simulation platform. The principle of the adaptive normalized least mean square algorithm for signal equalization is analyzed theoretically, and at the meanwhile, the taps number and the tap weights in the adaptive finite impulse response filter for compensating a certain fiber chromatic dispersion are also investigated by numerical simulation. The chromatic dispersion compensation performance of the adaptive filter is analyzed by evaluating the behavior of the bit-error-rate versus the optical signal-to-noise ratio, and the compensation results are also compared with other present digital filters.